To view this site you need Adobe Flash Player and your browser must allow javaScripts. Go here to get the latest Flash Player. Log Assembly Log Boss Screws Stack-n-Seal-2 Stack-n-Seal-2 is an internal sealant designed for use during construction of Milled and Swedish Cope Log Homes. The product provides an excellent internal seal and provides exceptional adhesive properties to bond to both wet and dry logs during log stacking operations. As the logs move over time, Stack-n-Seal-2 will stretch to maintain the log to log seal. Log Boss Screws possess maximum holding power and superior strength. Specifically designed for the construction of log and timber structures, Log Boss Screws are rust-resistant, require no predrilling and come coated with a lubricant for quick and easy driving. The wide flat-head design counter-sinks flush with the surface while maintaining super pull-down power without having to use a washer. The sixlobe star head helps prevent driver slippage and relief wings located just above the threads keep the fastener shaft from pulling power. Made in the USA, Log Boss Screws are packaged in convenient containers that contain 250 fasteners. One T-40 driver bit is supplied with every container. Stack-n-Seal-2 should be applied with the Cox Bulk Loading Gun per the log manufacturer's construction manual for bead size and location requirements. Stack-n-Seal-2 is designed only for use as an internal sealant. This product is not recommended for use as an external, exposed sealant. It skins over in 1-2 hours. The product cures fully in 2-8 weeks, depending on temperature and humidity levels Coverage per 5 Gallon Pail: Width of Gap 1/4” 3/8” ½” Coverage 710’ Linear Feet 317’ Linear Feet 178’ Linear Feet Bucket of 6” Screws - $ 141.75 Bucket of 8” Screws - $144.75 Bucket of 10” Screws - $154.75 Bucket of 11” Screws - $165.75 Bucket of 13” Screws - $186.75 Bucket of 15” Screws - $199.75 Case 10-30 oz Tubes - $119.75