http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/RSS.ashxJP Cycles PagesTue, 16 Jun 2009 23:40:18 +0200http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=1http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=1round Free iG ng Sh ppi s over 741-035 Oil Tanks for Softail® r on orde 99 $ 299 740-914 Oil Tank for 1989-99 Softail® 741-038 A perfect chrome replacement for the OEM oil tank. Fits Softail® 1989-99. (OEM 62498-91). 7400278 Softail® Oil Tank . . . . . . . . . . . . . . . . . . . . $149.99 Milwaukee Twins™ Custom Round Oil Tanks for 1984-99 Softail® or Rigid Frames 31/2-quart custom round steel oil tanks can be used on 1984-99 Softail® or Rigid Frames in standard or wide widths. They are 61/2" diameter and 113/4" long. The battery box is built-in, and they are available in center or side fill, with chrome or raw metal finishes. Tanks for wide Softails® are used where swingarm clearance is needed on the left side “wing.” All use stock Softail® style mounts, and include the front mount, filler cap and fittings. Keg Shaped Oil Tanks for 1986-99 Softail® Custom Oil Tanks for 1984-99 Softail® and Rigid Models Custom oil tanks feature chrome-plated steel construction and include mounting tabs. Available in side and center fill with either domed or octagonal ends. Built-in battery boxes measure 7" x 4" for Softail® batteries. Fits 1984-99 Softail® and rigid frame bikes. 741-035 741-036 741-037 741-038 Domed, Center Fill . . . . . . . . . . . . . . . . . . $317.99 Domed, Side Fill . . . . . . . . . . . . . . . . . . . . $317.99 Octagonal, Center Fill . . . . . . . . . . . . . . . $314.99 Octagonal, Side Fill . . . . . . . . . . . . . . . . . $314.99 741-176 1984-99 Softail® or Rigid Frames 740-910 740-911 740-912 740-913 740-914 740-915 740-916 740-917 Chrome side fill. . . . . . . . . . . . . . . . . . . . . $239.99 Raw side fill . . . . . . . . . . . . . . . . . . . . . . . . $229.99 Chrome center fill . . . . . . . . . . . . . . . . . . $239.99 Raw center fill . . . . . . . . . . . . . . . . . . . . . . $229.99 Chrome side fill. . . . . . . . . . . . . . . . . . . . . $239.99 Raw side fill . . . . . . . . . . . . . . . . . . . . . . . . $229.99 Chrome center fill . . . . . . . . . . . . . . . . . . $239.99 Raw center fill . . . . . . . . . . . . . . . . . . . . . . $229.99 These center fill oil tanks fit 1986-99 Softail® and custom applications. Comes in chrome or raw finish. Cap not included. 741-176 Raw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $259.99 741-177 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . $269.99 741-323 Wide Softail® Frames 741-322 Round Oil Tanks for 5-Speed 1986-2006 Softail® Frames Three beautifully finished, chrome 31/2-quart oil tanks with integral battery boxes. Two of them are styled after the classic ‘Barrel’ tanks from the 60’s and 70’s, and the other is a new take on the look, with ‘domed’ ends. They fit Paughco Easyride frame and 1986-99 OEM Softail® frames, and may also be adapted to many custom rigid frames, Battery clearance under the seat must be check closely as the seat may need to be notched. Will also fit 2000-06 Twin Cam® Softail® when custom oil lines and fittings are used. Each tank includes a filler cap. Made in the USA. 741-322 Side Fill round oil tank . . . . . . . . . . . . . . $299.99 741-323 Center Fill round domed oil tank . . . . $299.99 741-324 Center Fill round oil tank. . . . . . . . . . . . $299.99 701-480 Center Fill Oil Tanks for 1989-99 Softail® We’ve taken our best-selling oil tanks and moved the filter spout to the center of the tank under the seat. Each tank includes a threaded filler plug and all necessary fittings. Side Fill Oil Tanks for 1986-99 Softail® This great-looking tank is chrome-plated. It incorporates all the changes from the factory over the years, and includes filler plug and all fittings. 7400371 Chrome oil tank . . . . . . . . . . . . . . . . . . . . $209.99 111/2" Wide ‘Winged’ Center Fill Oil Tanks Same quality features as our side fill tanks with the ‘Wing’ extensions that fill the gap between the tank and frame. 701-480 Chrome, fits all 1989-99 Softail® . . . . . $219.99 7400370 Raw, fits all 1989-99 Softail® . . 2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=2http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=2Oil Tanks for Big Twin Replacement Oil Tanks for 1965-82 Big Twin Duplicates of the OEM oil tanks finished in brilliant chrome or black. 7400055 740-564 Black, 1965-E82 FX, FL (OEM 62504-65B). . $126.99 741-095 Chrome, L1982-86 4-speed FL & FX for use with remote external oil filter (OEM 62504-82) . . . $149.99 7400055 Chrome, 1965-E82 Big Twins with in tank oil filter (OEM 62504-65A) . . . . . . . . . . . . . . . . . . . $139.99 7400040 Chrome oil tank temp gauge, Black face for most custom and OEM side-fill tanks 1965-91 (except 741-095 Dyna Glide®, Sportster® and Softail®) (OEMs 6263579T, 62666-87T) . . . . $25.99 601-046 Colony drain plug, chrome 5/8"-18 thread (USA) . $7.99 970-801 Colony drain plug, black oxide 5/8"-18 thread (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.99 7400185 Chrome oil tank cap assembly (OEM 62610-52TA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99 Details see page 1086 740-385 740-640 Oil Tanks for 1936-57 Kick-start Big Twins These custom wraparound oil tanks have a 4-quart capacity and will fit original equipment Big Twin rigid frames with tin primaries and kick-start only 1936-57. Available with or without an integrated spin-on oil filter. They can also be adapted to most custom rigid frames. All tanks accept the stock tall 6-volt battery. Made in the USA. 740-452 With Spin-On Filter 740-385 Chrome side fill oil tank. . . . . . . . . . . . . $344.99 7400015 Chrome replacement filter (OEM 63782-80T) . . . . . . . . . . . . . . . . . . . . . $6.99 7400016 Black replacement filter (OEM 63810-80T) . . . . . . . . . . . . . . . . . . . . . $6.99 Smooth Wrap-Around Oil Tanks for 1965-E84 Big Twin This oil tank installs easily without fabrication and house the stock battery for FXE. The inner compartments let you lift out the battery. Also includes a conveniently located drain plug, chrome nippletype hose fittings and filler caps. This 3-quart tank will fit 1965-E84 FL/FX 4-speed models. Made in the USA. 740-452 Chrome oil tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $259.99 Without Spin-On Filter 740-640 Chrome side fill oil tank. . . . . . . . . . . . . $219.99 Original Type Oil Tank for 1936-64 Big Twin Features OEM wrap-around type construction, including seam-welded edges, which show weldmarks as original tanks. Sold in primer or chrome. 1958-64 type has battery rod tab supports. All have a screw-in dipstick except side fill, side fill tanks use rubber style push-in plugs. 740-389 7400410 740-133 740-683 740-131 740-982 740-132 *1936-57 Primer, stock . . . . . . . . . . . . . . $186.99 *1936-57 Chrome, stock. . . . . . . . . . . . . $164.99 1958-64 Primer, stock . . . . . . . . . . . . . . . $164.99 1958-64 Chrome, stock. . . . . . . . . . . . . . $164.99 1936-64 Primer, side fill . . . . . . . . . . . . . $186.99 1936-64 Chrome, side fill . . . . . . . . . . . . $159.99 1936-64 Rigid side fill smooth, 3 1/2 quart, equipped w/ 6V battery & tin primary only . . . . . . . . . . . . . . . . . . $253.99 Chrome, dipstick cap . . . . . . . . . . . . . . . . . $21.99 Zinc, dipstick cap . . . . . . . . . . . . . . . . . . . . $21.99 Cap gasket (each) . . . . . . . . . . . . . . . . . . . . . $2.99 1936-64 Parkerized mount plate. . . . . . $62.99 1936-64 Chrome mount plate . . . . . . . . $53.99 ‘Winged’ Oil Tanks for 1936-57 Rigid Frames Small ‘wing’ extensions at the rear of the tank fill any gaps between the rear fender and oil tank. They hold 31/2-quarts and have built-in battery boxes that accept stock FXE batteries. Available with right side filler neck. Fits all original equipment rigid frames from 1936-57 and most custom rigid frames with either steel or aluminum primaries. Complete with cap. Accepts most stock oil lines or custom steel-braided lines. 740-768 Side fill 2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=3http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=3Oil Tanks and Covers for Big Twin and Sportster® 7400255 740-861 3-Quart Side Oil Tanks for 1954-E78 Sportster® Tanks fit 1954-E78 electric start Sportsters®. Cap not included. 7400255 Chrome tank (OEM 62507-67A) . . . . . $149.99 740-682 Raw tank (OEM 62507-67A) . . . . . . . . . $135.99 7400185 Chrome oil tank cap assembly (OEM 62610-52TA) . . . . . . . . . . . . . . . . . . . $26.99 740-995 Mount bolt kit . . . . . . . . . . . . . . . . . . . . . . . $16.99 740-605 Cap gasket 1952-65 (OEM 62628-52). . . $1.99 7400380 Oil tank gasket 1966-78 (OEM 62628-66) (each) . . . . . . . . . . . . . . . . $1.99 7400031 Chrome Oil Tank for 1983-2009 Sportster® A great looking part that adds a bright splash of chrome to the right side of your Sportster®. An accurate reproduction of the original equipment part, it replaces the stock black unit perfectly. The ideal complement for our chrome ignition module and battery covers. 740-862 Chrome Oil Tank Covers for 1979-81 Sportster® Right-side chrome oil tank covers replace your stock cover perfectly. 740-861 1979 Sportster® (OEM 66415-79) . . . . $118.99 740-862 1980-81 Sportster® (OEM 66601-80) . $152.99 740-863 Mounting grommets for 1980-81 (OEM 11406) (pair) . . . . . . . . . . . . . . . . . . $10.99 7400260 Fits 1983-2009 883-1100-1200-XL-XLS-XLX 7400030 7400031 740-230 740-629 741-300 Chrome 1983-93 (OEM 62475-83) . . . $126.99 Chrome 1994-96 (OEM 62475-94) . . . $141.99 Black 1994-96 (OEM 62475-94) . . . . . . $152.99 Chrome 1997-2003 (OEM 62475-97). $152.99 Black 2004-09 (OEM 62888-04A) . . . . $269.99 740-376 740-598 381-838 740-647 Chrome Oil Tank Covers for 1983-93 and 2004-09 Sportster® Chrome oil tank covers are a one-piece form-fitting design to fully cover the outer surface of late model Sportster® oil tanks, including 883, 1100, 1200, XL, XLS and XLX models. The cover is easily installed without removal of the oil tank. 1983-93 versions attach to the rear oil tank fitting by OEM springs found on those models; the 2004-09 version uses clips. A version for 1994-2003 models is not available. 381-838 2004-09 Sportster® . . . . . . . . . . . . . . . . . $106.99 740-376 1983-93 Sportster® . . . . . . . . . . . . . . . . . . . $89.99 Chrome Oil Tank for 1970-78 XLCH This tank fits 1970-78 XLCH with kick start in rigid or stock frames. Includes chrome fill plug and top mount in place. Upper and lower mounts available separately. Will not fit electric start. 7400260 Tank (OEM 62508-73) . . . . . . . . . . . . . . . $169.99 740-598 Lower bracket, Chrome (OEM 62555-73) . . . . . . . . . . . . . $21.99 740-647 Upper bracket, Zinc Plated (OEM 62554-72) . . . . . . . . . . $21.99 740-992 Mount bolt kit . . . . . . . . . . . . . . . . . . . . . . . $12.99 Chrome Oil Tank Trim for 1965-86 Big Twin This extruded and chromed aluminum trim conceals the stock oil tank seam on all 1965-86 4-speed Big Twin (except FXST). Tank not included. (Replaces OEM 62534-65T). 7400125 Tank Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99 Baker™ Plus One Oil Pan for 1993-98 Evo® and 1999-2008 Twin Cam® Designed with 3D solid modeling to increase pan capacity by 1-quart. This reduces engine oil temperature by 10° on a 80° day. The feed and return on a stock pan are located within 2" of each other in the front of the pan. BAKER+1 pan has the feed located in the rear and the return in the front for a more complete system circulation. Multiple integral aluminum baffles eliminate the stock plastic baffle. The two-piece billet comes premium show-chromed or one-piece cast comes polished, black or raw finishes available for 1993-2008 FL applications. Made in the USA. 741-425 741-426 741-427 741-428 741-428 741-425 1999-2008 Twin Cam® FLT, 2 Piece Billet Pan Assembly, chrome. . . $1149.99 1993-98 Evo® FLT, 2 Piece Billet Pan Assembly, chrome . . . . . . . . . . . $1149.99 1999-2008 Twin Cam® FLT, Cast Pan Assembly, polished . . . . . . . . . . . $569.99 1999-2008 Twin Cam® FLT, Cast Pan Assembly, black2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=4http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=4Oil Tanks for Softail® and Big Twin Models 740-413 740-919 Chrome Oil Tank for 1982-90 FXR A complete chrome oil tank assembly for all 1982-90 FXR (except 1986-90 FXR Super Glide®). Adds sensational style and simplifies oil draining through the addition of a second drain hole on the left rear of the tank. Included with the tank is a remote drain hose fitting kit which allows it to be drained from the kickstand side through a rubber hose which, when not in use, plugs onto a framemounted dummy fitting which is included in the kit. Machine polished and then triple chrome-plated. (Replaces OEMs 62406-81, 62406-86 and 6241486). 740-490 Oil tank and remote drain kit. . . . . . . . $157.99 7400442 Well-Nuts® blind fasteners (OEM 8099) (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.99 740-414 Round Oil Tanks for Custom Use To get that traditional chopper look, you need these rubber mounted steel oil tanks. Available with a center or a side-fill cap, they are made of 16-gauge steel to resist cracking and 100% TIG welded for maximum strength. Each tank includes a heavyduty front mount and fill plug. Available chrome or raw. An extended internal oil return tube dumps hot engine oil to the far left side of the oil tank and keeps returned oil as far away from the feed line as possible, for an efficient circulating effect. A lower left-hand relief can be used with a chain or belt drive. Tanks measure 113/4" long and have a 61/2" OD. They fit all Hardbody® Fat-A-Tude, chopper style, and rigid frames. They Also fit 1984-99 OE Softail® frames if a front horseshoe type mount is fabricated and welded to the seat post. Uses a 1991-2009 Softail® battery. 740-413 Center fill, Chrome. . . . . . . . . . . . . . . . . . $286.99 741-070 Center fill, Chrome, Domed Side. . . . . $349.99 740-414 Side fill, Chrome . . . . . . . . . . . . . . . . . . . . $229.99 741-071 Side fill, Chrome, Domed Side . . . . . . . $349.99 740-901 Side fill, Raw steel. . . . . . . . . . . . . . . . . . . $229.99 740-921 Milwaukee Twins™ Oil Tanks for 1984-99 Softail® Late style 4-spigot oil tanks fit all 1984-99 Softail® models. Available chrome plated or raw for painting. Order mounting bracket separately on page 890. 740-918 Chrome, stock style . . . . . . . . . . . . . . . . . $169.99 740-919 Chrome, Smooth Top . . . . . . . . . . . . . . . $169.99 740-921 Chrome winged style . . . . . . . . . . . . . . . $176.99 740-920 Raw, Stock Style . . . . . . . . . . . . . . . . . . . . $149.99 740-399 741-178 Winged Horseshoe Oil Tanks for Custom Wide Tire Softail® Frames Due to the additional width of the wide tire frames, a standard width winged oil tank would interfere with the action of the rear fork. J&P Cycles® now offers steel, side-fill Winged Oil Tanks to fit your wide tire frames. These tanks hold slightly over three quarts of oil and use any 1984-99 Softail® battery. A special feature of these tanks is the internal oil routing: tanks dump oil to the far left side of the tank as far away from the feed line as possible. This internal line separation method creates an extremely efficient circulation effect producing cooler oil temperatures. Comes with chrome-plated fill plug. Choice of chrome-plated finish or raw steel finish. Made in the USA. 740-255 Chrome Winged Oil Tank . . . . . . . . . . . $299.99 740-399 Raw Finish Winged Oil Tank . . . . . . . . . $213.99 Original Style Raw Oil Tank for 1989-99 Softail® Perfect for custom painting, this original style oil tank features heavy-gauge steel construction and built-in battery box. Fits 1989-99 Softail® models and most aftermarket Softail® frames. Measures 81/4" x 111/4" x 6". Replaces (OEM 62498-89A) 7400105 Raw oil tank . . . . . . . . . . . . . . . . . . . . . . . . $139.99 Wide Wrap-Around Oil Tanks for 1984-99 Softail® and Custom Rigid Frames 741-179 These oil tanks are 14" wide, made to fit custom wide rigid frames or 1984-99 Softail® style frames. Available in chrome and raw finish. Feat2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=5http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=5740-902 Oil Caps, Dipsticks and Temperature Gauges 7400040 740-903 Choppers Inc. Six Shooter Oil Cap Polished billet 500-358 aluminum with .44 magnum shell casings. Looks great with matching 740-820 740-908 741-215 Oil Dipstick and Fill Plug for 1984-2009 Softail® These oil dipsticks and filler plugs replace the stock units. Available in five different designs. Each of these dipsticks is a superior alternative to the current stock part. Made in the USA. Oil Dipstick 2000-09 Softail® (except Rocker™) 740-902 740-903 740-904 741-216 740-905 740-907 740-908 741-215 741-415 741-416 741-417 741-418 Crusader Cross . . . . . . . . $69.99 Warrior . . . . . . . . . . . . . . . $67.99 Ball Milled . . . . . . . . . . . . $62.99 Reflections . . . . . . . . . . . . $63.99 Crusader Cross . . . . . . . . $69.99 Warrior . . . . . . . . . . . . . . . $63.99 Ball Milled . . . . . . . . . . . . $63.99 Reflections . . . . . . . . . . . . $63.99 ® accessories such as footpegs (page 873), shift knob (WWW.JPCYCLES.COM), risers (page 785), and grips (page 822). Made in the USA. 500-358 *For OEM oil tanks 1965-84 FL, 1984-99 FXST, & 1988-2003 XL & most custom tanks . . $94.99 740-827 **For 1991-2005 Dyna Glides®, 1993-2006 FLT, chrome $89.99 740-828 *For all Twin Cam® Softail® 2000-09 (except Rocker™) . . . . . $94.99 740-829 **For 1991-2005 Dyna Glide® and 1993-2006 FLT, black . . . . . . . . . . . . . . . . $126.99 *Note: Full push in caps **Note: Covers only. LCD Dipstick Temperature Gauges for 1984-2008 Models Contemporary oil tank dipstick has temperature gauge with lighted LCD display. It shows a constant reading in Fahrenheit or Celsius, and has an auto-off for the light to save batteries. A great clean, custom look! 740-820 740-821 740-814 741-195 741-196 741-197 741-198 741-468 741-469 741-483 2000-06 Softail® . . . . . . . $99.99 1984-99 Softail® . . . . . . . $99.99 1984-2003 Sportster®. . $89.99 1999-2006 FLT . . . . . . . $152.99 1993-98 Evo® FLT . . . . $152.99 1999-2005 TC88® FXD $152.99 1992-98 Evo® FXD. . . . $152.99 2007-08 Softail® . . . . . . . $83.99 2006-08 FXD . . . . . . . . . . $83.99 2007-08 FLHT, FLHR, FLTR . . . . . . . . . . . $112.99 7400090 Oil Tank Temperature Gauges for 1936-2009 Models 1" diameter face is easy to read and accurately shows oil temperatures between 50° and 350° F. 7400040 Black face for most custom and OEM side-fill tanks 1965-91 (except Dyna Glide®, Sportster® and Softail®) (OEMs 62635-79T, 62666-87T) . . . . . . . . . . . $25.99 7400210 Black face for all Sportster® 1982-2003, and Softail® 1984-99 (OEMs 62668-87T, 62667-87T) . . . . . . . . . . . $28.99 7400315 White face for 2000-09 FXST/FLST (except Rocker™) (OEM 62896-00) . . . . . . . $29.99 740-866 White face for 2004-09 Sportster® (OEM 63000-04) . . . . . . . $62.99 1984-99 Softail® Chrome Cap & Dipstick Combinations without Temperature Gauge for Big Twins 740-569 For all 1936-54 OEM oil tanks and custom tanks with 11/4"20 thread (USA). . . . . . . $19.99 7300200 7400060 2006-09 FL/Dyna Road Warrior . . . . . . . . . . $42.99 Nasty . . . . . . . . . . . . . . . . . $42.99 Nasty Speed Mill . . . . . . $42.99 Crusader Cross . . . . . . . . $42.99 Trident Oil Filler Cap for 1993-2006 Models The Trident Oil Filler Cap will certainly set your ride apart. This chrome-plated die-cast cap replaces your stock, plain black metal top. It's easy to grab and easy to install while adding a much higher cool factor. 741-191 1993-2006 Touring Models, Dressers®, Road Kings®, Road Glides®, Street Glides® and all 1999-2005 Dyna®. . . . . . $29.99 Chrome Oil Tank Dipsticks for 1970-2003 Models Chrome replacements for OEM dipsticks. 7400090 Long dipstick for 1970- FL, 1971-85 FX, 1982-83, FXR 1980-86, 1980-86 FLT and 1970-78 XLCH (OEM 62625-70A) . . . . . $12.99 7400060 Short dipstick for Softail® 1984-99 and 1982-2003 XL (OEM 62595-82A) . . . . . $12.99 7300201 Oil Cap 1999-2005 Dyna® Models 741-355 741-356 741-357 741-358 741-359 741-345 741-346 741-347 741-348 7412009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=6http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=6Oil Tank Mounting Hardware and Oil Caps Heavy Duty Rubber Mounts for 1965-84 Big Twin and 1967-84 Sportster® Stronger-than-stock rubber mounts have internal wound springs welded to each stud plate and then heat-sealed inside the bonded rubber housing. Studs are 1/4"-20 x 1/2" long on each side. These heavy-duty rubber mounts should outlast any other mount available. 7400035 Replacement heavy duty rubber mounts (OEM 62563-65) (each) . $4.99 7400180 Chrome Heavy Duty Oil Tank Mount Brackets for 1984-99 Softail® These oil tank mount brackets fit 1984-99 Softail®. You can buy the complete mount kit which includes both the front and rear mount or you can buy just the front or rear mount separately. Each mount has been reinforced in the weak points, then given a durable chrome finish. 7400334 Kit with front and rear mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99 7400333 Front oil tank mount bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99 7400332 Rear oil tank mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29.99 Original-style Chrome Oil Tank Cap Fits the original style oil tank on all 1965-86 4-speed Big Twin (except Softail®) and 1967-E78 Sportster® with electric start. Zombie Oil Filler Cap Cover for 1993-2006 Models 7400460 7400185 Chrome oil tank cap assembly (OEM 62610-52TA). . . . . . . . $26.99 7400380 Oil tank gasket 1966-78 (OEM 62628-66) (each) . . . . . . . . . . . . . . . $1.99 740-681 7400350 Whether you’re into skulls or not, your bike cries out for this part to perk-up that dull oil filler cap cover. This chrome-plated, die-cast cap is easy to install and makes checking your oil a breeze. Sold each. 741-190 Fits 1993-2006 FLHT, FLHR, FLTR, FLHX and 1999-2005 Dyna® . . . . . . . . . . . . . . . . . $49.99 Oil Tank Support Brackets for 1936-84 4-speed Big Twin Chrome for Big Twins with wrap-around tanks. 1965-84 frames must be drilled and tapped for installation. The 740-681 includes spacers. 740-681 1958-84 (OEM 62584-58) . . . . . . . $26.99 740-985 1936-57 Parkerized (OEM 62585-36) . . . . . . . $19.99 3500060 Battery plate bracket (OEM 62585-36). . . . . . . . . $6.99 3500060 Vibration-Resistant Mounting Studs This is just the answer for custom builders. These studs are perfect for mounting gas and oil tanks. Sold each unless otherwise noted. 7400180 ISO® Mounting Rubber Stud 1/4" male to male (OEM 62563-65) . . . . . . . . $3.99 7400351 Replacement rubber mounts (5/16"-24 x 3/4" on both ends) (3 pk) . . . . . . . . . . . . . . . . . . $6.99 7400350 ISO® Mounting Rubber Stud 5/16" male to female (OEM 50235-63) . . . . . . . . $5.99 Mount Kits 740-702 1936-57 Cadmium kit. . $14.99 740-622 1958-64 cadmium (USA) . . . . . . . . . . . . . . . . . $22.99 740-621 1958-64 chrome (USA) . . . . . . . . . . . . . . . . . $23.99 740-986 Spacer, Parkerized (kit) $19.99 Spacer Kits 1936-64 740-082 1936-64 Zinc (pair) . . . . . $8.99 Oil Tank Mount Kits for 1958-64 Big Twin Contains exact duplicate of fasteners, spacers and lockwashers used on 1958-64 Big Twin. Sold as kit. Made in the USA. 740-621 1958-64 chrome (USA) $23.99 740-622 1958-64 cadmium (USA) . . . . . . . . . . . . . . . . . $22.99 Heavy Duty Mounts These studs exceed OEM design standards in tensile strength, shear resistance and sag resistance. 7400460 1/4"-20 x 1/2" stud at both ends . . . . . . . . . . . . . . . . . . . . . . . . $6.99 Oil Cool Cap Stylish and functional, the built-in heat sink reduces your oil tank’s temperature. Features top heat sink. 741-495 Fits stock and most custom oil tanks 1965-99 Classic (except XL and FXST) . . . . . . . . . $39.99 Chrome ISO Mount Kit Kit includes (2) 1/4"-20 ISO mounts and chrome billet covers. Fits 196699 oil tanks and replaces the stock rubber mounts. 7400406 Iso Mount Kit. . . . . . . . . . $21.99 Chrome Billet Covers for Mounting Studs Cover the ugly rubber mounts on custom gas and 2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=7http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=7Oil Pressure Gauges 7400320 Oil Pressure Gauge Kits for 1984-99 Evolution® Big Twin Motors These oil pressure gauge kits permit you to read your oil pressure at a glance while you’re riding your bike. These kits come complete with the chrome adapters and an oil line that connects the engine block and the rocker box. Fits all 1984-99 Evolution® Big Twin motors (except Twin Cam®). Available with 100 lb. or 60 lb. liquid-filled oil pressure gauges. 5700007 Kit with 100 lb. Analog gauge . . . . . . . . . . . . . . . . . . . . $39.99 5700002 Kit with 60 lb. Analog gauge . . . . . . . . . . . . . . . . . . . . . $39.99 7400320 Replacement Chrome fitting kit only (gauge not included) . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99 570-101 5700002 740-795 740-797 5700010 740-800 Rocker Box Oil Pressure Gauges A selection of liquid-filled oil pressure gauges with unique chrome adapters which permit them to be mounted to the rear rockershaft. Now you can install your oil pressure gauge in a place where you can easily read it while you’re riding your bike. Installation takes only a few minutes because the adapter replaces the stock rockershaft end plug. Fits all 1957-85 Sportster® and 1966-84 Shovelhead Big Twins with your choice of 60 lb. or 100 lb. gauges. Auto Meter® 11/2" Oil Pressure Gauges Auto Meter's® 11/2" oil pressure gauges are a perfect fit in tight spaces, and show your flow with precision. Available in 3-face styles in 0-60 lb. or 0-100 lb. ranges. 60 PSI 740-795 Black face . . . . . . . . . . . . . $32.99 740-797 White face . . . . . . . . . . . . $32.99 740-799 Silver face. . . . . . . . . . . . . $32.99 100 PSI Liquid-Filled Oil Pressure Gauges 11/2" OD liquid-filled oil pressure gauges feature a polished stainless steel bezel, chrome case, and a glass lens. Available with either 60 lb. or 100 lb. faces with 270° needle sweep. Each gauge complete with all required fittings, and replacement fittings for the late model Big Twin. Sold each. 570-100 740-796 Black face . . . . . . . . . . . . . $32.99 740-798 White face . . . . . . . . . . . . $32.99 740-800 Silver face. . . . . . . . . . . . . $32.99 60 Pound Gauges 7400170 1957-70 XLs and 1966-70 Big Twins $49.99 5700010 1971-84 Big Twins and 1971-85 XLs . . . . . . $49.99 Mini Oil Pressure Gauges These mini oil pressure gauges have a 1/8" NPT fitting. Available as a gauge only or with rocker box fittings for 1971-84 Big Twin and 1971-85 Sportster®. Sold each. 570-100 1971-84 Shovelhead Big Twin, 1971-85 XL. . . . . . . . . . . . $44.99 570-101 1/8" NPT, gauge only . . . $39.99 740-231 100 Pound Gauges 5700011 1971-84 Big Twins and 1971-85 XLs . . . . . . $49.99 740-198 Carbon Fiber Engine Turned 60 Pound Gauges 5700000 Fits Sportster® 1957-84 $56.99 5700001 Fits Big Twin 1936-69. . $39.99 5700035 Fits Big Twin 1970-91 (stock exhaust with crossover tube may interfere). . . . . . . . $36.99 5700025 Replacement fittings for 5700006 & 5700035 . . . $9.99 ACCEL Liquid Filled 11/2" Oil Pressure Gauge ® 100 Pound Gauges 5700005 Fits Big Twin 1936-69. . $29.99 5700006 Fits Big Twin 1970-91 (stock exhaust with crossover tube may interfere). . . . . . . . $39.99 5700025 Replacement fittings for 5700006 & 5700035 . . . $9.99 740-854 Features a Stainless Steel with solidbrass internals. The 11/2" face is covered with glycerin to reduce needle bounce and then sealed with a real glass lens that won't fade, melt or distort. Easy installation with 1/8" NPT threads. Sold each. 740-231 0-60 lb. . . . . . . . . . . . . . . . $47.99 740-198 0-100 lb. . . . . . . . . . . . . . . $46.99 Sunset Liquid-Filled Oil Pressure Gauges Monitor the engine’s critical oil pressure with gauges that have eyecatching custom face designs. 11/2" OD glass lens, polished stainless steel bezel. Chrome case filled with vibration damping fluid. See matching oil tank dipstick on Page 889. 740-853 Oil Temperature Gauge Kit for 1999-2007 FLHT and FLTR, 2002-07 FLTRSE Oil Pressure Gauges for 1938-99 Big Twi2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=8http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=8Oil Pressure Gauges, Switches and Fittings Ness-Tech™ Oil Pressure Gauge and Bracket Kit 740-516 Chrome Oil Gauge Fittings Replacement chrome fittings for most aftermarket oil gauge kits. Sold each. 7400321 7400322 7400323 7400324 7400325 7400326 7400327 A B C D A clean way to mount an oil pressure gauge on Big Twin and Sportster® engines. Gives a great view of the gauge and adds style to your engine. The finest assemblies available - each is beautifully CNCmachined from aluminum then 740-516 chrome, and each comes with a quality stainless steel hose assembly. Complete kits include a 60 lb. liquid-filled gauge, chromed bracket, chromed cone assembly, stainless steel hose assembly and chrome hardware. Bracket and cone assembly accepts most 11/2" diameter oil pressure gauges; bracket can also be used without the cone to accept the slightly larger chrome liquid-filled gauges. Made in the USA. Note: Check clearance between gauge and gas tank. 740-516 Fits all All 1984-99 80" Evolution® Big Twin . . . . . . . . . . . . . . . . . . . . . . . . $179.99 740-495 Complete kit for 1999-2009 Twin Cam® . . . . . . . . . . . . . . . . . . . . . . . . . . . $209.99 740-600 Complete kit for 1993-2003 Sportster® . . . . . . . . . . . . . . . . . . . . . . . . . . . . $192.99 E F G (A) 90° 1/8" female elbow, Sportster® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.99 (B) 90°, 1/8" x 1/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.99 (C) 45° 1/8" NPT male/female, for Big Twin. . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.99 (D) Adapter 1/2"-20 male to 1/8" NPT female, 1970-99 Big Twin . . . . . . . . $5.99 (E) Adapter 1/8" NPT male/female, 1938-69 Big Twin. . . . . . . . . . . . . . . . . . $4.99 (F) 11/2" long 1/8" NPT pipe extension, for Sportster® . . . . . . . . . . . . . . . . . $3.99 (G) 3" long 1/8" NPT pipe extension, Sportster® . . . . . . . . . . . . . . . . . . . . . . . $4.99 ACCEL® Oil Pressure Switches for Big Twin and Sportster® Oil pressure switches with heavy-duty contacts, brass ferrule and thermo-plastic insulator. 1954-76 Sportster® may require fitting 740-538. Made in the USA. 740-468 Bright Finish 740-468 1941-84 FL, 1980-83 FLT, 1982-83 FXR, switch (OEM 26552-72) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99 740-538 1957-76, fitting (OEM 26420-57) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99 740-530 1977-2005 Sportster® (OEM 26554-77) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.99 740-473 1984-99 Evolution® Big Twin (except models equipped with electric oil pressure gauge), 2000-07 FLHT, FLHRI, FLHRCI, FLHR, 2008 FLHR, FLHRC, (OEM 26561-84) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99 Replacement Parts 740-590 Replacement oil pressure hose assembly for 740-516 . . . . . . . . . . . . . . $37.99 720-943 Replacement hose for 1999-2009 Twin Cam® . . . . . . . . . . . . . . . . . . . . . . . $36.99 740-671 Standard 60 lbs liquid filled oil gauge only . . . . . . . . . . . . . . . . . . . . . . . . . $44.99 Dual Adapter Natural Push-Pull Oil Tank Plug Great looks and easy access. This chrome oil tank plug fits 1984-99 FXST and FLST, 1982-2003 XL, 1982-93 FXR. Comes complete with a chrome cap and push-pull rubber stopper. 7400160 Oil tank filler plug . . . . . . $7.99 Liquid-Filled Oil Pressure Gauge for 1982-84 Shovelhead and 1984-99 Evolution® Contains special non-yellow fluid that dampens the internal movement for improved gauge reliability. Incorporates corrosion-resistant stainless steel bezel and includes HarleyDavidson® “Bar & Shield” graphics that match various late-model instruments. Complete with chrome-plated steel fittings and O-rings for crankcase installation. New mounting design prevents damage from improper installation. 741-290 Fits 1982-84 Shovelhead and2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=9http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=9Oil Gauge, Line, Brackets and Sender Covers Chrome Dress-up Kit for 1992-99 Evo® Big Twin We’ve taken three of our best-sellers and combined them into one convenient package of dress-up parts for your Evolution® Big Twin. Included are our diecast Tappet Block Cover set, Oil Filter Housing Cover, and Oil Pump Cover. All of the parts are designed for simple installation without removing or modifying parts and do a great job of enhancing the appearance of your 1992-99 Evolution® Big Twin. Note: Will not fit Twin Cam 88®. 7400381 Dress up Kit . . . . . . . . . . . . . . . . . . . . . . . . $109.99 740-448 740-448 Küryakyn™ Oil Pressure Sender Cover for 1987-98 FLT Models Küryakyn's™ oil pressure sender cover is sleek, smooth and beautifully chrome. It includes a new bright finished adapter fitting that permits using this part in conjunction with other accessories such as tappet block and oil pump covers. Sending unit not included. 740-611 FLTC/FLHTC 1987-98 equipped w/large 2-terminal sending units . . . . . $29.99 Küryakyn™ Oil Line Cover and Transmission Shroud for 1999-2006 Twin Cam® 740-446 Oil Sending Switch (RTI) Harness Cover Includes a hollow tube that will fit over a single 16gauge wire and a 16-18 gauge ring terminal. Overall outside diameter is under 1/4". This cover can also be used for single wire passing lamps on Heritage® and Road King® models. 383-035 18" Harness cover . . . . . . . . . . . . . . . . . . . . $31.99 No custom Twin Cam® will ever be complete without this beautiful cover. After this easy installation, the rough cast area around the transmission and oil lines disappears under a layer of luscious chrome. 740-446 1999-2005 TC® Dyna® . . . . . . . . . . . . . . . . $59.99 740-447 For TC® Dressers® 2000-01, 1999-2001 TC® Road King® . . . . . . . . . . . . . . . . . . . . . . . . . . $69.99 740-448 2002-06 Road Kings® & TC® Dressers® . $93.99 Nasty Stepped 740-024 Oil Pressure Gauge Covers These chrome aluminum gauge covers come in Nasty or Stepped design and are available for 11/2" and 13/4" diameter gauges. They slide over the gauge and are held in place by press fit or with silicone, sold separately. Made in the USA. S&S Billet Filter Bracket This attractive billet oil filter mounting bracket is perfect for engine-mounted oil filters on 1992-99 Evo® stock engines and all 1970-99 style engines with S&S crankcases (except Twin Cam®). 741-320 S&S Billet Filter Bracket . . . . . . . . . . . . . $202.99 Oil Pressure Gauge Lines for 1984-2009 Models Oil pressure line with braided stainless steel construction has a one-piece fitting for easy installation. Intended for gauges mounted on the rocker box. 740-024 1984-99 Evolution® Big Twin. . . . . . . . . . $27.99 740-025 1993-2003 Evolution® Sportster® . . . . . $59.99 740-026 1999-2009 Twin Cam® . . . . . . . . . . . . . . . . $39.99 11/2" Oil Gauge Cover 740-199 Nasty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $41.99 740-200 Stepped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $41.99 13/4" Oil Gauge Cover 740-201 Nasty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $41.99 740-202 Stepped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $41.99 S&S Billet Filter Bracket for 1999-2009 Twin Cam® These polished billet oil filter brackets were originally created to complete S&S T124 engines, but they are an excellent upgrade for stock Harley-Davidson® Twin Cam® engines as well. The bracket places the filter slightly farther from the crankcase to allow just that little bit of extra clearance that makes installation and removal of the filter a little easier. What makes this filter bracket really useful however, is that it is machined to allow oil to be routed to an oil cooler right from the filter mounting bracket. 741-321 1999-2009 Twin Cam® . . . . . . . . . . . . . . $142.99 Küryakyn™ Oil Pressure Sender Cover for 1999-2009 FL Touring Models Here’s a great example of how details make the difference! The st2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=10http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=10Covers For Oil Filter Housing and Pumps 7400420 Custom Mount 7400360 OEM Replacement Chrome Oil Filter Mounts for 1992-99 Evo® Big Twin Chrome mounts fit 1992-99 Evo® Big Twin models and accept all brands of oil filters. One replaces the OEM cast mount and uses OEM hardware. The other is a custom model with 3/8" fittings that can use stainless steel or rubber lines. 7400420 Custom oil filter mount with 3/8" fittings for stainless steel or rubber lines . . . . . $39.99 7400360 OEM replacement mount (OEM 26378-92A; 26381-92A) . . . . . . . . $56.99 Oil Filter Housing Cover for 1992-99 Evo® Big Twin Steel cover was designed to fit like a second skin over the original equipment oil filter housing on your late-model Big Twin. It provides an economical means of chroming the right side of your bike and installs in minutes, and is held in place with silicone (included in the kit). 4000070 For 1992-99 Evolution® Big Twin . . . . . . $39.99 Küryakyn™ Oil Line Nacelle for 2000-09 Twin Cam® Softail® This die-cast chrome cover replaces the wrinkle black or plain cast surface where the oil pump used to be on previous engines. The stock chrome oil lines poke through the center of the cover for a high tech appearance. J&P Cycles® highly recommends this chrome transmission shroud 620-315 (on page 582) with this cover for maximum flash. Fits 2000-09 Twin Cam® Softail® (except Rocker™). 740-333 2000-06 Twin Cam® Softail®. . . . . . . . . . . $62.99 741-467 2007-09 Twin Cam Softail® . . . . . . . . . . . $72.99 Oil Filler Spout Cover for 1993-2006 Dresser® and Road King® This really cleans up that dull, drab area around your oil filler neck. Chrome-plated die-cast construction installs easily. Fits 1993-2006 Dresser® and Road King® (except Screamin’ Eagle® models with 103" engine), compatible with HD® Engine- Transmission Interface covers. (Replaces OEM 66503-00, 66503-02, 66096-02). 741-047 Spout cover. . . . . . . . . . . . . . . . . . . . . . . . . . $59.99 Complete Oil Filter/Mounting Kit for 1992-99 Big Twin Evolution® Contains everything needed to convert your OEM non-chrome plated oil filter assembly to this beautifully Chrome plated kit at half the cost that a chrome plater would charge. This kit includes a Spin On that is 31/2" long, but can be used with any length filter with 3/4"-16 thread. Fits all 1992-99 Big Twin Evolution® and any 1970-99 aftermarket cases that are drilled and tapped for the 1992-99 style oil filter mount. (Replaces OEM 26381-92). 740-608 Oil filter/mounting kit . . . . . . . . . . . . . . . . $98.99 Thunder Cycle Oil Filter Housings for 1984-99 Big Twin CNC-machined chrome billet oil filter housing is designed for 1984-99 Evo® Big Twin® style motors. This Eddie Trotta original has an added length to hide the oil lines from plain view. Made in the USA. 741-101 Oil filter housing. . . . . . . . . . . . . . . . . . . . $198.99 7400050 Doss Slotted Oil Pump Cover for 1992-99 Evo® Big Twin Here’s a Rick Doss version of a classic accessory. By adding slots to the traditional chrome oil pump cover they achieve a whole new look that is both simple and attractive. Easy-to-install, Chrome Oil Pump Covers for 1968-91 Big Twin These chrome covers were designed to bolt-on to stock aluminum oil pumps in minutes. Made from the finest materials available, they are guaranteed to deliver unsurpassed styling and ease of installation. They fit all 1968-91 Shovelhead and Evolution® Big Twin (except 1991 Sturgis® and Dyna Glide®) and do a great job of enhancing the right side of your motorcycle. 7400130 Fits all Big Twin (except Dyna Glide®) without a fitting for the primary chain oiler 1968-91 . . . $22.99 7400235 Fits all Big Twin with a fitting for the primary chain oiler 1968-91 . . . $22.99 includes chrome mounting hardware. 741-055 Oil pump cover . . . . . . . . . . . . . . . . . . . . . . . $9.99 7400130 7400050 Fits all Big Twin 1992-99 (except Twin Cam 88®) . . . . . . . . . . . . . . $26.99 432-539 Upgrade hardware kit for 192009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=11http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=11Oil Filter Mounts and Adapters Front 740-480 Front 740-741 7400020 7400336 Chrome Slimline Oil Filter Mount for 1992-99 Evo® Big Twin This chrome aluminum oil filter mount is a slick way to mount oil filters on stock or custom bikes. the 1/2" housing is an attractive alternative to the bulky style stock oil filter mounts. Cleans up the front of the motor on stock bikes or keeps with the custom look on custom show bikes. Fits Evo® style Big Twin 1992-99 (except Twin Cam®). Includes 3/8" chrome oil line fittings. 7400331 Oil filter mount. . . . . . . . $69.99 740-337 FXST Style Oil Filter Kit for 1970-99 Big Twin Jagg Oil Filter Adapters for 1984-2009 Models Back Back Features bolt-on mounting behind kickstand bracket. Fits 1970-99 Shovel or Evo® engines and can be used as an easy access auxiliary unit in addition to filter in tank. Bracket is replica of Jagg adapters allow quick, easy access to the oil supply for any oil cooler installation. Advanced design moves hot oil through the filter before being sent to the oil cooler for less overall restriction and pressure drop. Made in the USA. 740-741 Fits 80" Evolution® and late 1984-2006 Sportster® with front mounted spinon filters (except fuel injected Evo® and Twin Cam®) . . . . . . . . . . . . . . $94.99 740-480 Fits 1999-09 Twin Cam® & EFI Evo® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $118.99 741-330 Anti-rotation adapter for part 740-909 Twin Cam® A . . . . . . . . . . . . . . . $16.99 741-331 Anti-rotation adapter for part 740-909 Twin Cam® B . . . . . . . . . . . . . . . $16.99 741-332 Nut upgrade to be used with adapter 740-741. . . . . . . . . . . . . . . . . . . . . $17.99 1984-86 FXST type with oil spigots that are copper brazed in a vacuum for lasting durability. Kit includes chrome filter and 6 feet of rubber hose with clamps. 7400336 Filter kit . . . . . . . . . . . . . . $66.99 7400020 Chrome replacement filter (OEM 63796-77T). . . . . . . $8.99 7400021 Black replacement filter (OEM 63805-80T). . . . . . . $7.99 Front Vendetta Oil Filter Kit 740-336 740-823 Through 1964 Harley had a cool external oil filter on big twins. Crime Scene Choppers kept the same orientation of the bosses for the lines, added some fins on top and changed over to a spin-on. You can mount this in the stock location, or hang it out in the wind the way Indian Larry did on his bikes. The Vendetta filter mount comes with a chrome K&N filter and hose barbs. You can use either the short filter as shown or a long style filter. Stock style late-model H-D® filters are also available. ® Oil Pre-Filters Oil Pre-filters are constructed of aluminum with a 40 mesh screen installed to trap large debris and a circular magnetic collar to collect the ultra fine ferrous particles before they reach the engine. Unit can be installed in the following locations for 3/8" ID oil line: Supply line before the engine, all models. Primary scavenger return line on Early FLH and FX. Return line to oil tank on XLCH-FL-EL-UL and models without a factory filter. External oil return on high performance heads. On high-pressure supply or return use the prefilter with the 1/8" NPT threaded body. 740-337 1/8" body . . . . . . . . . . . . . . $39.99 740-336 Barbed end . . . . . . . . . . . $39.99 Back 741-090 Filter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $229.99 7400015 Chrome replacement filter (OEM 63782-80T) . . . . . . . . . . . . . . . . . . . . . . . . $6.99 7400025 Chrome long filter (OEM 63813-90). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.99 Offset Oil Filter Adapter with Automatic Thermostat for 1999-2009 Twin Cam® Chrome Generator Oil Filter Adapter for 1958-69 Big Twin Bolts in place of two-brush generator or alternator generator 1958-69 Big Twin case conversions. 741-175 Oil Filter Adapter. . . . . $106.99 Universal Oil Line Pre-filter Kit with Compression Fittings For 3/8" stainless steel ho2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=12http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=12Oil Filter Kits 740-079 Details see page 1086 7400336 740-462 Oil Filter Kit for 1970-84 Big Twin Chrome bracket and filter kit mount behind the kickstand bracket on 1970-84 4-speed Big Twins. Includes chrome bracket, oil filter, hose and clamps. May interfere with aftermarket forward shifters. 7400336 Filter kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $66.99 7400020 Chrome replacement filter (OEM 63796-77T). . . . . . . . . . . . . . . . . . . . . . $8.99 Perf-Form Filter Canister and Oil Cooler for 1970-84 Big Twin ™ 7400120 Made of polished and lacquered cast aluminum, this combination oil filter and cooler was designed to mount externally in front of the engine. It fits all 1970-84 4-speed Big Twin when installed in conjunction with our chrome bracket 740-728. Kit includes an oil filter, the canister with chrome-plated hose fittings, 7 feet of 3/8" oil line, 4 hose clamps and 4 tie-wraps. Made in the USA. 740-079 Oil filter & cooler with recessed fins . $169.99 Original-Style Accessory Oil Filter System An accurate reproduction of the early-style, accessory oil filter kit. Used on 1940-64 Big Twin. Can be easily fitted to all 4-speed and Evo® Softail®. 7400120 Chrome oil filter assembly with gasket kit and filter (OEM 63800-48) . . . . . . . . . . . . $56.99 740-981 Chrome and Polished assembly with polished top; includes gasket and filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $71.99 7400165 Gasket kit for oil filter assembly. . . . . . . . $4.99 7400045 Filter element fits all models 1940-64 with external filters. Also fits similar aftermarket old style filter assemblies. Replacement filter. (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.99 Accessories and Parts Shown installed 7400262 Filter Pac for 1975-99 Big Twin 7400262 Optional chrome mounting bracket. Bolts to the left front footpeg and kickstand frame lug to mount the oil filter/cooler horizontally over the voltage regulator in front of the engine. 740-728 Chrome mounting bracket . . . . . . . . . . . $34.99 740-462 Perform Filter . . . . . . . . . . . . . . . . . . . . . . . . . $8.99 7400020 Custom oil filter and regulator mount designed to clean-up the front lower mount area. Fits all 1975-99 4-speed Big Twin and Softail®. Attaches to the front of the engine. Includes a chrome billet aluminum base plate, chrome hose fittings and a chrome oil filter. Utilizes stock regulator. 7400262 Complete kit. . . . . . . . . . . . . . . . . . . . . . . . . $79.99 7400015 Chrome replacement filter (OEM 63782-80T). . . . . . . . . . . . . . . . . . . . . . $6.99 7400330 7400215 Oil Filter Canister Line Set This is a 2-piece line set with nuts for rigid or swingarm frames. 740-254 740-126 900-202 900-201 1958-64 Chrome swing arm line set . . $59.99 1958-64 Cadmium Swing arm line set $53.99 1940-47 Chrome oil line set . . . . . . . . . . $62.99 1940-47 Cadmium oil line set . . . . . . . . $54.99 Spin-On Oil Filter Kit A high-tech replacement for your canister-type oil filters. It’s approximately the same size as the stock unit and accepts 7400375 7400020 chrome spinon filter to eliminate leaks. Makes filter changes clean and easy. Comes with both threaded and slipon fittings. Uses mounting brackets found below. 7400375 Spin On filter kit, filter not included. . . $52.99 7400020 Chrome replacement filter (OEM 63796-77T). . . . . . . . . . . . . . . . . . . . . . $8.99 Oil Line Sleeve Nut & Replacement Seal Cadmium plated. (Replaces OEM 63527-50). Fits all Big Twin equipped with Accessory Oil Filter System. Note: See mounting brackets below left. 740-137 1950-64, oil filter line nut (OEM 63527-50) . . . . . . . . . . . . . . . . . . . . . . . $9.99 740-522 Rubber Seal, (OEM 63529-50T) (each). . $1.99 7400020 7400220 7400177 7400175 Oil Filter Kits for 1957-79 Sportster and 1970-84 Big Twin ® Full-flow automotive style spin on oil filter kits. Each of these custom kits includes a chrome heavygauge steel bracket and ch2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=13http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=13Oil Filters 7400016 7400010 740-508 740-514 7400025 740-472 Perf-Form™ Spin-on Oil Filters for 1980-2009 Models Top quality black or chrome spin on filters for models from 1980-2009. The large K&N Spin-On Oil Filters for 1980-2009 Models K&N oil filters are designed for today’s highperformance synthetic oils and are unaffected by racing fuels. Includes a check valve to prevent oil drainback and dry starts, and a new pressure relief valve. Includes an 11/16" wrench nut for easy service (drilled for safety wire security); 50% thicker wall construction; stronger inner core; heavy base plate with double-rolled seal. The K&N filter is TÜV endorsed and TÜV factory production monitored. 740-508 Chrome, short for 1982-84 FL 4-speed only, 1982-86 FXWG, 1980-E84 Sportster® (OEM 63782-80T) . . . . . . . . . . . . . . . . . . . . $13.99 740-472 Chrome, long, for Twin Cam® 1999-2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.99 740-484 Black, long, for 1999-2009 Twin Cam® (OEM 63731-99). . . . . . . . . . . . . . . . . . . . . . $14.99 740-514 Chrome, extra long for 1991-98 Dyna® (OEMs 63812-90 & 63813-91). . . . . . . . . $17.99 740-824 Chrome, for 2002-09 V-Rod® (OEM 63793-01K) . . . . . . . . . . . . . . . . . . . . $16.99 700-161 Black 1980-98 FLT, 1982-94 FXR, 1984-99 Softail® & L1984-2003 Sportster® . . . . . $14.99 700-160 Chrome, 1980-98 FLT, 1982-94 FXR, 1984-99 Softail® & L1984-2003 Sportster® . . . . . $16.99 740-923 2002-09 Buell Blast 500, 2004-07 Firebolt XB12R 1200, 2003-09 Firebolt XB9R 900, 2003-07 Lightning/City X XB9S/SX 900, 2004-09 Lightning XB12S/SCG 1200 . . $14.99 Top Quality Stock Replacement Spin-On Oil Filters 1980-2009 Models Chrome and black spin-on oil filters are available for all 1980-2009 models. Each has a built-in, correctly-calibrated pressure relief valve and onepiece tank with fully rolled and safety crimped edge for strength and superior protection against leakage under the most severe conditions. filter is one inch longer than stock to increase the oil capacity of the system and permit the oil filter to help cool the oil. The short filter features 24 square inches more pleated filter paper than comparable filters and an anti-drain back valve not found on most other filters. Made in the USA. 1999-2009 Twin Cam® Replacement Filters 10 micron filter. A great upgrade for replacing long filters on other models for increased filtration. 7400010 Chrome (OEM 63798-99) . . . . . . . . . . . . . . $9.99 31/2" Long Filter Fits 1984-99 Softail®, 1980-98 Dresser®, and 1992-94 FXR, as well as most Harley-Davidson® accessory oil filter kits. 3/4"-16 threads. 740-494 Black (OEM 63805-80, 63806-83) . . . . . . . $9.99 740-529 Chrome (OEM 63796-77A). . . . . . . . . . . . $14.99 2002-09 V-Rod® Replacement Filter Developed specifically for the unique demands of the ‘Revolution’ engine. Capable of trapping particulates down to 10 microns. 7400462 Chrome (Replaces OEM 63793-01) . . . . . $7.99 740-756 Black (Replaces OEM 63793-01) . . . . . . . . $6.99 21/2" Short Filter Fits all Sportster® 1980-E84, and 4-speed Big Twin (except Softail®) with factory installed spin-on oil filters from late 1982-86. 740-706 Black (OEM 63810-80) . . . . . . . . . . . . . . . . . $9.99 740-524 Chrome (OEM 63782-80) . . . . . . . . . . . . . $14.99 21/2" Short Replacement Filters For 1980-E84 Sportster® and late 1982-86 4-speed Big Twin (except Softail®) with factory installed spin-on oil filter. 14mm threads. 7400015 Chrome replacement filter (OEM 63782-80T). . . . . . . . . . . . . . . . . . . . . . $6.99 7400016 Black replacement filter (OEM 63810-80T). . . . . . . . . . . . . . . . . . . . . . $6.99 Long Filter for 2000-09 Twin Cam® 740-324 Chrome (OEM 63798-99) . . . . . . . . . . . . . $16.99 The 31/2" Long Replacement Filter For 1984-99 Softail®, 1980-98 Dresser®, and 1982-94 FXR, 1984-2009 Sportster®, as well as most Harley-Davidson® accessory oil filter kits. 3/4"-16 threads. 7400020 Chrome replacement filter (OEM 632009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=14http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=14Oil Filter/Cooler Combos and Adapters Top Quality Oil Filters with Hex Top Nut for 1980-2009 Models Chrome and black oil filters come with a 17mm hex nut on the top for ease of installation and removal. Twin Cam® filters feature 10 micron paper for the best in filtration qualities. Each filter features a one-piece tank with rolled and safety-crimped edge for strength and safety. 31/2" Long Replacement Filter For 1984-99 Softail®, 1980-98 Dresser®, and 1982-94 FXR, 1984-2009 Sportster®, as well as most Harley-Davidson® accessory oil filter kits. 7400468 Chrome, 3/4"-16 threads (OEM 63796-77T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99 7400469 Black, 3/4"-16 threads (OEM 63805-80T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.99 Twin Cam® Replacement Filters For 1999-2009 Twin Cam®. A great upgrade for replacing long filters on other models for increased filtration. 7400470 Chrome, 10 micron filter (OEM 63798-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99 7400471 Black, 10 micron filter (OEM 63798-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99 21/2" Short Replacement Filter For 1980-E84 Sportster® and late 1982-86 4-speed Big Twin (except Softail®) with factory installed spin-on oil filter. 7400474 Chrome, With factory installed spin-on oil filter, 14mm threads. (OEM 63782-80T) . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99 7400475 Black, With factory installed spin-on oil filter, 14mm threads. (OEM 63710-80T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.99 51/2" Extra Long Replacement Filter Top Quality Chrome Oil Filter with Hex Top Nut, for All 1991-98 Dyna Glide®; All 1992-99 Evolution® Big Twin; 1984-2009 Sportster® 7400472 Chrome, (OEM 63813-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99 7400473 Black, (OEM 63812-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99 7400076 Chrome Indian Replacement Oil Filter for 1999-2003 Scout, Spirit, and Chief Indian chrome replacement oil filter is a direct OEM replacement. Fits 1999-2003 Indian Scout, Spirit, and Chief models with S&S or PowerPlus engines. 7400328 Chrome oil filter . . . . . . . . . . . . . . . . . . . . . $13.99 741-481 741-482 7400070 7400080 Top Quality High-Performance Magnetic Oil Filters for 1980-2009 Models Each of these chrome filters has a magnetic ring tower in the center of the filter to remove metal particles under 10 microns which might have traveled through the filter wall. They also have built-in, correctly-calibrated pressure relief valves and one-piece cans with fully-rolled and safetycrimped edges to protect against leakage. These high-performance oil filters have more paper folds than our Top Quality stock replacement spin-on oil filters resulting in 30% more filtering surface and the filter paper lasts 30% longer. Great for both high-performance and stock motors. Klear Force Oil Purifier for 1986-2009 Evo® and Twin Cam® This is smart preventative medicine! This powerful magnetic device attaches to the end of oil filters making the entire casing a powerful magnet. Now, virtually all ferrous particles released from normal engine wear are trapped inside the filter casing. Eliminating contamination, along with normal routine maintenance can add years and miles of service to your engine. Evo® or Twin Cam® engine. 740-305 Klear Force Oil Purifier (each) . . . . . . . . $29.99 Pegasus Performance Billet Reuseable Oil Filter for 1984-99 Evo® and 2000-09 Twin Cam® Big Twin This “Spin On” oil filter works better and never has to be replaced. It is friendly to the environment. It filters smaller particles than stock paper throw-away filters by utilizing a special micron stainless steel mesh. It also has a pre-filter feature as three2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=15http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=15Oil Change Helpers LiquiVac Oil Extractor Finally, a clean way to change the oil on your Harley®! Changing the oil in a Harley® has always been a messy job. Now, with the oil extractor, you never touch the oil. Pump the air out of the green vacuum chamber (about 15 pumps), insert the tube into the oil tank filler hole, then open the valve. The oil extractor sucks the oil out of the tank in about 10 minutes. Made in the USA. 740-487 Liquivac oil extractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $54.99 7400429 eGlide Goodies Oil Change Helpers eGlide Goodies makes it easier and cleaner to change oil on Dressers®. The OH-1 positions itself below the oil filter and mount, in-between the filter, regulator, and front cylinder where it captures oil drippings as you remove the filter. The OH-2 works on 1965-84 4-speed FLH Electra Glides® with left side mount oil tank. Designed to fit under the oil drain plug and is positioned between the rear of the outer primary cover and saddlebag. A notch is provided for bikes equipped with saddlebag guards. Made in the USA. 740-898 OH-1 Drain tray for 1998-2009 FLT . . . . . . . . $19.99 740-899 OH-2 Drain Tray for 1965-84 4-speed FLH . . . . . . . . . . $39.99 7400478 3" Oil Filter Wrench for 2000-09 Twin Cam® Black stamped steel oil filter wrench fits all 2000-09 Twin Cam® models and has a cutout design to clear the cam sensor. (Replaces OEM 44067). Sold each. 9100002 Twin Cam® filter wrench . . . . . . . . . . . . . . . . . . . . . . . $10.99 7400390 Oil Filter Drain Trays Once the filter has been loosened, these unique Drain Trays fit below the filter and against the filter mount to direct the oil into a catch pan. Resists chemical attack and dimensional distortion from hot oil. Small enough to take with you on long trips. Use Big Twin tray on any model with an OEM front mounted oil filter. XL tray can be used on late 1984-2003 Sportster®. Sold each. 7400390 1984-99 Evo® Big Twin oil filter drain tray . . . . . $16.99 7400478 XL Oil filter drain tray for Late 1984-2003 Sportster® . . $16.99 7400429 *1999-2009 Twin Cam®, FLHT, FLHR, FLTR, and FXD . . . $19.99 *Note: Does not work on FXD models equipped with forward controls. 7400285 Clean Funnel Tired of dirty funnels? The Clean Funnel keeps drips in and the dirt out! The plastic caps on each end eliminate spills and keep contaminants like dirt and other materials from sticking to the left over oil inside of the funnel and clean fluid helps prevent mechanical damage. 910-442 1-pint funnel . . . . . . . . . . . $8.99 Oil Change Helper for 1992-2009 Models Take the mess out of the oil change process. Forget the clean-up of oil drippings on the engine case and frame tubes. Snaps behind the oil filter mount to funnel oil away from the bike into the drain pan. Sold each. 7400285 1992-99 Evo® Big Twin (except Dresser® and Road King®), 1999-2009 Twin Cam® equipped with removal of fuel injection sensor . . . . . . . $14.99 Oil Filter Wrenches Close-clearance design makes servicing hard-to-remove or reach filters easier. Has 3/8" ratchet mount and full flutes for a firm grip on the filter. Sold each. 7400305 76mm single step, 14 flutes, Fits OEM 83605-80A, 6380580T, 63806-83, Filter wrench works with all factory spin-on kits and J&P® filters 7400020 and 7400021 . . . . . . . . . . $8.99 740-331 74/76 mm double step, 15 flutes, fits J&P® 7400015 and 7400016 . . . . . . . . . . $9.99 Catch-All Drip Pan Ideal for use on showroom floors, garages, carports, or under equipment. Made of durable polyethylene material to assure longevity and flexibility. Holds 8 quarts. Dimensions 24" x 36" x 1/2". 910-603 Drip pan . . . . . . . . . . . . . . $27.99 FilterMag™ Oil Filter Magnet Stops Harmful Metal Particles Your oil filter can trap dirt, but fine metal particles can get right through, damaging your engine. FilterMag™ precision-ground magnets trap these metal particles against the inner wall of the filter. Reusa2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=16http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=16RevTech® and Lucas Motor Oil 900-249 900-239 RevTech® and RevTech® ‘Pure’ Oil Change ‘Convenience Packs’ Easy-to-carry package, combines 3 qts. of RevTech® or RevTech® Pure 20W50 oil with a short, long or extra-long chrome RevTech® Magnetic Oil Filter. With long chrome magnetic filter 7400076 RevTech Motorcycle Oil ® For all 5-speed 1980-99 Models (except Dyna Glide®), Late-1984-2009 Sportster®, and Softail® 1984-99, as well as most H-D® accessory oil filter kits 900-245 3 Quarts RevTech® & filter . . . . . . . . . . . . . . . . $24.99 740-408 3 Quarts RevTech® Pure & filter . . . . . . . . . . . $24.99 Developed by a major U.S. oil company, RevTech® Oil is formulated to meet the demands of HarleyDavidson® V-twin® engines. Special additives are designed for API SH/CG-4, CF-4, CF performance. RevTech® Oil meets all warranty performance criteria for HarleyDavidson® engines and its use does not void new vehicle warranties. Made in the USA. 900-217 Shown with Oil Change Helper 900-217 3 Quarts RevTech® Pure, filter and Oil Change Helper # 7400285 . . . . . . . . . . . . . . . . . . . . . . . $41.99 With extra-long magnetic filter 7400080 For 1984-2009 Sportster®, all 1991-98 Dyna Glide® and 1992-99 Big Twin (except TC88®). 900-246 3 Quarts RevTech® & filter . . . . . . . . . . . . . . . . $26.99 With short chrome magnetic filter 7400070 740-409 3 Quarts RevTech® Pure & filter . . . . . . . . . . . $29.99 1980-E84 Sportster®, and 1982-86 4-speed Big Twin. 900-247 3 Quarts RevTech® & filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.99 Ground ship only Suggested Usage Guide 10W-40 Multiviscosity Recommended for Evolution® engines and when air temperatures range from 10° to 50°F. 900-207 10W-40 (1 qt) . . . . . . . . . . . . . . . . . $5.99 20W-50 Multiviscosity RevTech ‘Pure’ Advanced Motorcycle Lubricant ® Recommended for Evolution® engines and when air temperatures range from 30° to 100°F. 900-239 20W-50 1 Quart . . . . . . . . . . . . . . . $4.99 900-249 SAE 20W50 (1 gallon container) . . . . . . . . . $24.99 25W-60 Multiviscosity Hydrocracked oils generate 90% less corrosive acids than conventional motor oils, reduce sludge formation by more than 50%, and resist oxidation up to three times longer. Meets or exceeds all H-D® warranty requirements. API SH/CG-4 approved. Sold each. Made in the USA. 900-242 10W-40 (1qt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99 740-411 20W-50 (1qt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99 900-243 25W-60 (1qt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99 900-244 50W (1qt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99 900-241 Grade60 (1qt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99 900-253 Grade70 (1qt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99 900-252 20W-50 (1 gallon container) . . . . . . . . . . . . . . . . . . $23.99 Ground ship only Recommended for Evolution® engines and when air temperatures range from 50° to 110°F. Also recommended in pre-Evo® engines and when air temperatures range from 30° to 100° Fahrenheit. 900-250 25W-60 (1 qt.). . . . . . . . . . . . . . . . . $5.99 50W Straight weight Recommended for use in pre-Evolution® engines and when air temperatures range from 60° to 100° Fahrenheit. 900-251 50W (1 qt.) . . . . . . . . . . . . . . . . . . . . $5.99 Grade60 Straight weight Lucas Oil Lucas Motorcycle Oil is built for endurance, lasting up to 4 times longer than other brands. All Lucas motorcycle oils meet JASO specification. See WWW.JPCYCLES.COM for more products. Recommended for use in pre-Evolution® engines and when air temperatures range from 80° to 100° Fahrenheit. 900-240 Grade60 (1 qt.) . . . . . . . . . . . . . . . . $5.99 Grade70 Straight weight Recommended for us2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=17http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=17Quality Motor Oil 900-623 Bel-Ray EXS Synthetic Superbike Motor Oil Unsurpassed performance and protection for all motorcycle engines. High polarity synthetic base oils and exclusive anti-wear chemistry in EXS oil protect engine, transmission and clutch components under the most severe stresses and temperatures. EXS was developed in superbike competition and meets Service Classifications API, SG, CCMC G5. Bel-Ray V-Twin® Motor Oil Contains exclusive Bel-Ray anti-wear chemistry reducing bearing and valve train wear and keeps pistons and rings from scuffing. Features low-volatility base oils to minimize consumption and cleans deposits and reduces sludge and varnishes. Lowers temperatures and minimizes deposits formation for cleaner and cooler running engine. BelRay’s additive chemistry, highviscosity index, low-volatility petroleum base oils and oxidation stability provide added wear protection for increased engine reliability performance and engine protection. 900-406 20W-50 1 quart. . . . . . . . $7.99 Ground ship only 900-631 AMSOIL® Motorcycle Oil 900-640 10W40 740-739 1 Liter . . . . . . . $17.99 900-218 4 Liters . . . . . . $69.99 Premium synthetic oil designed for those who demand the absolute best lubrication for their motorcycles. Specially formulated to excel in all areas unique to motorcycles, including high temperatures of air-cooled engines, wet clutch lubrication, extreme pressure regions of gears and chains and rust common to short trips and storage. Engine protection is not sacrificed in high heat conditions. Has the best high temperature film strength and contains a heavy treatment of anti-wear additives to reduce wear regardless of the operating conditions. Thermally stable and contains maximum levels of oxidation inhibitor additives. It is extremely resistant to breakdown and engineered to prevent damaging sludge and carbon deposits for superior engine cleanliness. 900-623 900-625 900-631 900-640 10W-40 (1 quart) . . . . . . . . . . . . . . . . . . . . . Call For Pricing 20W-50 (1 quart) . . . . . . . . . . . . . . . . . . . . . Call For Pricing 75W-90 (1 quart) . . . . . . . . . . . . . . . . . . . . . Call For Pricing 80W-90 (1 quart) . . . . . . . . . . . . . . . . . . . . . Call For Pricing Ground ship only Genuine Harley-Davidson® Oil Genuine Harley-Davidson® oil is tested and designed for use with Harley-Davidson® motorcycles. 740-869 20W50 quart . . $5.99 740-887 20W50 1 gallon . . . . . $23.99 740-886 50W quart . . . . $5.99 740-888 60W quart . . . . $5.99 Ground ship only Note: J&P Cycles® is not a licensed Harley-Davidson® dealer nor do we intend to represent ourselves as being affiliated with HarleyDavidson®. This product was purchased by J&P Cycles® from a licensed HarleyDavidson® dealer. 10W50 740-313 1 Liter . . . . . . . $17.99 740-314 4 Liters . . . . . . $69.99 Ground ship only 910-630 V-Twin® SemiSynthetic Motor Oil 910-628 Manhattan Power Plus Synthetic Motor Oil Guaranteed to reduce temperatures to a minimum of 15°F. Manhattan Power Plus V-Twin® Motor Oil is specifically engineered to handle the excessive temperatures found in big air ® cooled V-Twins and is also recommended for use in water cooled engines. 900-515 20W50 1 quart . . . . . . . . . . . . . . $12.99 900-516 20W50 1 gallon . . . . . . . . . . . . . . $47.99 Ground ship only 910-629 PJ1 Gold Fire Motor Oil 910-627 Gold Fire racing-grade motor oil is a high-performance semi-synthetic blend for single or multi-cylinder applications. Formulated with anti-shearing agents and friction modifiers for wet clutch applications. Meets or exceeds API SG and JASO MA specifications. 910-627 10W-40, 1 liter. $9.99 910-628 10W-40, 1 gallon . . . . . $34.99 910-629 20W-50, 1 liter. $9.99 910-630 20W-50, 1 gallon . . . . . $36.99 Ground ship only Exclusive Bel-Ray anti wear chemistry reduces bearing and valve train wear and keeps pistons and rings from scuffing. Flash point is higher then standard petroleum based oils which limits oil consumption2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=18http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=18Oil Coolers and Accessories 7400140 Motorcycle Innovations Bad Boy Super Cooler for 1989-2009 Models Motorcycle Innovations is excited about its Bad Boy® cooler, which is designed to be mounted on the down tube of any Harley® (from Sportster® to full Dressers® with lowers) or any model/and year Buell, Titan, Ironhorse, Big Dog, BossHoss or Wild Boar. Made of aluminum, the ports are designed to allow the oil to pass through the cooler four times, to give maximum cooling capacity. Under testing, in extreme conditions, it removed up to 40°F. from the oil temperature, so imagine what it could do for the long life and hassle-free maintenance of your bike. Not only does it work good, in powder-coated black it looks good, too. For just 20 minutes installation time you can cut down the repairs and treat your bike to the very best in coolers. It has a built-in thermostat to help things get going on colder days and eliminates overheating. Kit comes with complete instructions. Made in the USA. Milwaukee Twins™ Dual Cool II Same high quality as the original Dual Cool, but this one follows the 7400140 front legs on most Big Twins. Mounts on the highway bar cross bracket with a vibration-resistant spacer. The Dual Cool II is longer, has 241/2% more cooling fins than the original. Available separately are two different sizes of chrome aluminum standoff clamps (for frames with 11/8" or 11/4" tubing) from the bottom of the cooler tubes. 7400140 Dual Cool II (each). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $89.99 7400145 11/8" x 11/8" standoff clamp (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.99 7400146 11/4" x 11/8" standoff clamp (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.99 Mount Bracket Flip for 2-Way Mounting For 1989-99 Carburetor Models 740-439 Black. . . . . . . . . . . . . . . . $433.99 740-443 Polished . . . . . . . . . . . . $473.99 For 1995-99 Fuel-Injected Models 740-440 Black. . . . . . . . . . . . . . . . $479.99 740-444 Polished . . . . . . . . . . . . $516.99 For 1994-2003 Buell Models 740-441 Black. . . . . . . . . . . . . . . . $439.99 740-442 Polished . . . . . . . . . . . . $479.99 741-268 For 1999-2009 Twin Cam® Models 740-948 Black. . . . . . . . . . . . . . . . $479.99 740-949 Polished . . . . . . . . . . . . $516.99 741-269 Feuling Oil Filter and Oil Cooler for 1999-2008 Models Milwaukee Twins™ Dual Cool With a slim design for a custom look, the chrome-plated Dual Cool finned billet oil cooler now has 25% more cooling fins! It mounts with single bolt on the highway bar cross bracket on all Harley® models. The mount bracket detaches and flips up for two way mounting. Uses a 3/8" mounting hole. 9"H x 33/4"W x 11/8" Tube Diameter 7400135 Billet oil cooler . . . . . . . . . . . . . . . . . . $69.99 Cleaner cooler oil with the Feuling filtration system, this by-pass microfilter is designed as an additional filter used in conjunction with the stock oil filter. The Feuling filtration system drastically reduces contamination and viscosity breakdown in the oil; protecting the engine from cylinder, piston, ring and bearing wear, cylinder bore polishing and extreme oil temperatures, therefore promoting engine performance, longer engine life and extended oil change intervals. This filter/cooler system makes a clean custom look, mounting above the voltage regulator between the frame rails in position to take advantage of the air flow from the front tire. The kit includes filter/cooler housing and mounting bracket, oil filter mount, braided steel lines and swivel fittings, spin-on oil filter and all necessary hardware. Kits available in chrome and black chrome. Made in the USA. Chrome 741-265 1999-2008 Dyna® and Softail® (except 2006-08 Dyna® lowrider) . $499.99 741-266 2006-08 Dyna® Lowrider® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $499.99 741-267 1999-2008 FLT, FLHT,2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=19http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=19Details see page 1086 Jagg Oil Coolers Slimline Black Slimline Chrome Horizontal Low Mount Black Horizontal Low Mount Jagg Oil Coolers: Minutes to install; years of added riding! Jagg combines high quality manufacturing with the latest technology and best materials to give you an efficient and reliable oil cooler. Jagg Oil Coolers effectively reduce oil temperature to safe operating levels for maximum life from both oil and engine. The Jagg by-pass valve, sold separately, fits all coolers and acts as a manual thermostat when the air temperature drops below 55°F. Filter adapters (sold separately) provide easy access to oil supply for installation of oil coolers. Kits come complete with hardware and mounting instructions. Made in the USA. Deluxe NOTE: Filter adapter 740-480 on page 895 is required for all Twin Cam® engines in order to access the oil supply. Replacement Oil Cooler Cores 740-933 Mount brackets have holes 35/8" on center. . . . . $166.99 740-934 M6 screw bung mount, 35/8" on center, right . . . $166.99 Deluxe and Slimline Coolers Deluxe and Slimline Coolers mount to the left frame down-tube, away from the frame, to allow airflow to both the oil cooler and engine cylinders. Unique, highly durable Uralite mounts have a shock absorbing effect and clean styling. The six-tube, two-pass design also has special in-line turbulators to add efficiency without causing oil pressure loss or restriction. Aluminum construction with durable powder-coated finish. The Deluxe version has billet aluminum end caps with machined fins that match and complement the style of the engine. The Slimline has smooth end caps (black or chrome) to blend into the frame for a clean, streamlined look. Includes 11/8" and 11/4" frame tube clamps to fit all models shown. 740-933 740-934 Horizontal Low Mount Cooler Designed for late model Evo® and TC88® Dressers® and Road Kings®, the Low Mount is particularly suited for Ultra with lowers. Compact unit has up to three times the effective cooling surface of the closest competitor. Unique mounting system ensures easy installation. Special inline turbulators and mini-louvered air fins ensure unparalleled efficiency. Deluxe 740-825 740-825 740-825 740-825 740-825 740-825 $229.99 $229.99 $229.99 $229.99 $229.99 $229.99 - Slimline Black 740-826 740-826 740-826 740-826 740-826 740-826 $193.99 $193.99 $193.99 $193.99 $193.99 $193.99 - Slimline Chrome 740-930 740-930 740-930 740-930 740-930 740-930 $306.99 $306.99 $306.99 $306.99 $306.99 $306.99 - Horizontal Black 740-306 741-510 721-000 740-306 741-477 $194.99 $231.99 $194.99 $194.99 $231.99 Horizontal Chrome 740-932 741-511 740-932 $231.99 $306.99 $231.99 - For 1955-2003 Sportster® For 2004-09 Sportster® For 1955-83 Panhead & Shovelhead For 1982-99 FXR For 1991-2009 Dyna® For 1984-99 Softail® For 2000-09 Softail® For 1984-2009 Dresser® & Road King® For 1984-98 FLHT, FLHR and FLTR 740-937 Jagg Oil Cooler Cover Quality black vinyl cover features hookand-loop fasteners for easy installation and removal. It keeps oil at the correct operating temperature when riding in cool weather and is designed for use on OEM and Jagg Slimline oil coolers. Made in the USA. 740-876 Oil cooler cover . . . . . . . . . . . . . . . . $16.99 Jagg Oil Cooler Clamps Jagg oil cooler clamps are ideally suited for mounting Jagg’s universal and custom oil coolers and work well in a variety of other ways, too. Sold each. Made in the USA. 740-935 For 1" dia. frames . . . . . . . . . . . . . . . $7.99 740-936 For 11/8" dia. frames . . . . . . . . . . . . . . . $7.99 740-937 For 11/4" dia. frames . . . . . . . . . . . . . . . $7.99 740-938 For 13/8" dia. frames . . . . . . . . . . . . . . . $7.99 740-939 For 11/2" dia. frames . . . . . . . . . . . . . . . $7.99 741-480 3/8" hose clamps, black (10-pk) $14.99 Jagg 10-Row High Performance Oil Coolers for 2000-09 Softail® and 1984-2009 Dresser® and Road King® Unique inline airflow orientation capitalizes on the low pressure created by the integrated 2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=20http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=20Oil Coolers, Pumps and Parts Feuling “Super Pump” for 1999-2006 Twin Cam® Engines ™ round Free iG ng p Sh pi s over r on orde 99 $ 299 The Feuling Super Pump™ is the ultimate oil pump for Twin Cam®. It's an absolute must for modified TC’s® and is highly recommended for stock bikes. The Super Pump™ is a billet design that eliminates wet sumping, blow-by, and oily air cleaners through aerospace design and tolerances. Besides running cooler, you’ll gain 2 hp and 4 ft/lbs of torque. High-flow 2" Gerotor gears provide 40% more pressure volume and 60% more scavenge volume. Best of all, the Super Pump™ bolts right into your stock location. Made in the USA. 740-196 Super Pump™ for Twin Cam® 1999-2006 (except 2006 Dyna® models) . . . . . . . . . . . . . . . . . . . . . . . . . . $429.99 Feuling Pressure Relief Spring for 1999-2009 Twin Cam® Increase cam plate pressure relief pop-off pressure with a Feuling spring. This spring has the proper spring rate to control the popoff pressure and oil flow in by-pass port. Bench testing recommended with the Feuling complete pressure test tool 910-981 sets your pop-off pressure to your preference. For use with all 1999-2009 Twin Cam® plates. Made in the USA. 741-281 Feuling Pressure Relief Spring (each) . $13.99 Oil Pump Kits for 1973-99 Big Twin Kits include oil pump, gaskets, fittings, drive shaft, mounting bolts, keys and snap rings. Fits 1973-99 Big Twin. Chrome finish. 740-719 Old Style New Style 740-719 Chrome pump for 1992-99 (Evolution® only) . . . . . . . . . . . . . . . . . . $244.99 740-701 *Chrome oil pump kit for 1973-91 Big Twin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $209.99 740-616 Polished pump for 1992-99 (Evolution® only) . . . . . . . . . . . . . . . . . . $269.99 740-613 Oil pump drill jig . . . . . . . . . . . . . . . . . . . . . $49.99 *Note: Some early applications, 1936-E81, require motor cases to be drilled for the newer style pump. New gears in place Feuling Oil Pump Rebuild Kit The Feuling rebuild kit includes everything needed to properly rebuild the high-volume Feuling Twin Cam® Oil Pump, including new O-rings, separator plate, and installation instructions. Made in the USA. 433-803 For Rebuild kit 740-196. . . . . . . . . . . . . . $21.99 741-280 Fits Feuling oil pump 741-279 . . . . . . . $22.99 S&S HVHP Oil Pump The HVHP (High Volume, High Pressure) oil pump is more efficient. This oil pump supplies approximately 38% more oil than previous S&S pumps and can return 61% more. It will maintain oil pressure between 10 and 35 p.s.i. under most conditions. Should prolonged idling during extremely hot weather cause the pressure to drop below 10 p.s.i., pressurized lubrication will continue to both the bottom and top ends. The HVHP pump utilizes the same driveshaft and drive gears as older pumps and is easily installed on any Evo® style engine with the 1992-99 bolt pattern. Made in the USA. Note: Standard cover has 1992-99 oil line hook-ups. Universal cover has various oil line hook-ups, for more flexibility for custom builders. 740-810 Standard cover . . . . . . . . . . . . . . . . . . . . . $486.99 740-811 Universal cover . . . . . . . . . . . . . . . . . . . . . $486.99 Feuling Race Pump for 1999-2009 Twin Cam® This Feuling Oil Pump for Twin Cam® engines is designed for the racer. It’s made with tighter tolerances, harder 7075 billet aluminum, and blueprinted to make this a true precision part. 40% pressure volume and 60% scavenge volume increase over stock. Eliminates wet sumping and oily air cleaners while using cooler temperatures with more horsepower and torque. Stock replacement for 1999-2009 Twin Cam®. Made in the USA. 433-804 1999-2006 Twin Cam® (except 2006 Dyna®) . . . . . . . . . . . . . . . $524.99 741-279 2006-09 Dyna®, 2007-09 Softail®, 2007-09 FLHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $425.99 740-933 740-883 740-884 740-934 Jagg Universal Oil Cooler Cores Universal cooler cores are ideal for custom w2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=21http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=21Oil Pumps and Parts S&S Billet Aluminum Oil Pumps for 1936-99 Big Twin CNC-machined to maintain close tolerances and strict quality control, these billet oil pumps all feature the same oiling pattern as 1981-91 engines. This results in split oil path that applies more pressure to the top end for longer component life. Each pump features multiple oil ports for a variety of plumbing options. Kits include billet oil pump, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and relief valve cover screws with O-rings, gaskets, fittings and hardware. No provision for rear chain oiling. Made in the USA. Note: Oil pumps require 740-504 gasket kit sold below. Not compatible with OEM style gaskets. 740-729 * Fits Big Twin 1936-72 (Installation on pre-1981 models require drill jig 740-613) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $304.99 740-527 * Fits Big Twin 1973-91 (Installation on pre-1981 models require drill jig 740-613) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $304.99 740-731 Fits Big Twin 1992-99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $424.99 740-504 Paper gasket kit for 1936-91 style pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.99 740-906 1992-99 gasket set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99 Pro-Series Billet Oil Pump for 1981-99 Models Constructed of high-quality billet aluminum with a polished finish. The only oil pump that delivers oil to the crankshaft at idle (all other oil pumps have a pressure valve that closes at idle, denying the crankshaft oil flow at idle.) Unique three valve system provides 8-10 pounds of oil pressure at idle with a steady stream of oil to the crankshaft for a cooler running motor. Stainless steel check valve eliminates wet sumping upon start up - positively will not leak oil into the lower end during storage. Available as an oil pump assembly. No provisions for primary or rear chain oiling. Fits 1981-99 Evo®, Big Twin® except Twin Cam 88® (will also fit back to 1973 Big Twin® with proper case modifications.) Replacement gasket kits include a cover gasket, body gasket, snap rings and keys. Made in the USA. 740-349 Oil pump assembly fits 1992-99 Big Twin . . . . . . . . . . . . . . . . . . . . . . . . . $426.99 740-347 Oil pump assembly fits 1981-91 Big Twin . . . . . . . . . . . . . . . . . . . . . . . . . $426.99 431-386 Replacement gasket kit fits 1992-99 Big Twin . . . . . . . . . . . . . . . . . . . . . . $29.99 431-387 Replacement gasket kit fits 1981-91 Big Twin . . . . . . . . . . . . . . . . . . . . . . $29.99 740-757 Acorn Style Chrome Oil Pump Mount Kits for 1968-2003 Models Made in the USA. 741-118 1968-77 Big Twin . . . . $24.99 741-128 1992-99 Softail®, 1992-98 Dyna® and FLT . . . . . . . . . . . . . $29.99 741-131 1991-2003 Sportster® $14.99 JIMS® Oil Pumps with Stock Style Cover for 1973-99 Big Twin High quality, precision components are a JIMS® hallmark. These polished aluminum oil pumps and parts are no exception. Made in the USA. Note: 1973-84 models require drill jig 740-613 listed on page 904. 740-757 1992-99 Evo® Big Twin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $463.99 740-758 1973-91 Big Twin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $409.99 Oil Pump Replacement Parts Perfect replacements for the OEM pieces on Big Twin (except Twin Cam 88®) 1973-99. 740-760 Drive shaft (short) for Big Twin 1936-67 (Replaces OEM 26346-36) . . $32.99 740-700 Drive shaft (long) for Big Twin 1968-99 (Replaces OEMs 26346-68, 26346-70) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=22http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=22Oil Pump Parts A B C J D F F G E H K L I 740-475 740-422 1 17 14 3 15 12 1 2 18 4 5 10 19 9 6 11 Oil Line Fittings Chrome Male/Female Fittings For gas and oil. Measured in NPT thread and ID of line. Sold each unless otherwise noted. 7400357 (A) Straight, 1/8" x 1/4" hose . . . . . . . . . . $3.99 7400395 (A) 1967-76, feed fitting (OEM 63533-41) . . . . . . . . $3.99 740-257 (A) Straight, 1/4" x 5/16" hose fitting. . . $5.99 7400385 (B) 90°, 1/8" x 3/8" hose . . $4.99 7400355 (B) 90°, 1/4" x 5/16" hose fitting. . . $6.99 7400356 (H) Straight, barbed 1/8" x 3/8" hose . . $4.99 740-355 (H) Straight barbed, 1/8" x 3/8" hose (set of 3) . . . . . . . . . $7.99 740-601 (I) Nipple bolt for oil tank vent line. 1937-52 45", 1936-39 Big Twin (OEM 63578-36) . $12.99 740-525 (J) Oil line fitting for steel oil lines. . . . . . . $13.99 740-639 7400443 (A) Straight, 1/8" x 5/16" hose. . . . . . . . . $3.99 7400440 (B) 90°, 1/8" x 1/4" hose . . $6.99 7400444 (B) 90°, 1/8" x 5/16" hose. . $6.99 Oil Pump 7 Parts for 1936-99 13 Big Twin Except Twin Cam® Chrome Male/Female NPT Fittings 7400323 (C) 45° 1/8" NPT male/female, for Big Twin . . . . . . . . . . . . $4.99 7400322 (D) Elbow fitting, chrome. Fits Big Twin 1968-99 (OEM 26338-68) . . . . . . . . $3.99 740-478 (E) Straight 1/8" x 1/8". . . . $4.99 Male NPT Plugs 2400016 (F) 1/8" , chrome . . . . . . . . $3.99 740-251 (F) 1/4", plain. . . . . . . . . . . . $4.99 740-668 (G) 1958-76, plug (OEM 45830-48) . . . . . . . . $1.99 Banjo Bolts and Washers 740-565 (K) Washer, Vent, (OEM 6440) . . . . . . . . . . . . $1.99 740-117 Bolt, Feed & Return (OEM 3520-36A) . . . . . . $14.99 740-549 (L) Washer Feed (OEM 3570-36B) . . . . . . . . $1.99 740-417 S&S Oil Pump Drive Gears Oil pump drive gear fits 1973-99 Big Twin (except Twin Cam®) Pinion shaft oil pump gear fits 1973-89 Big Twin. Must be used as a set or with OEM equivalents. Made in the USA. 740-417 Oil pump drive gear (24-tooth) (OEM 26345-73) . . . . . . . $24.99 740-639 Pinion shaft oil pump gear (OEM 26349-73A) . . . . . $34.99 431-591 Sold each unless otherwise indicated. 16 740-422 (1) Key, drive shaft. Big Twin 1941-99, small key (OEM 26348-15) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $.99 740-302 (1) Key, drive shaft. Fits Big Twin 1936-67, partial key (OEM 26340-36) $1.99 740-676 (5) 1955-62 and 1972-76, retainer (OEM 11002) . . . . . . . . . . . . . . . . . . . . . . $1.99 740-429 (2) Snap ring without ears, drive shaft. Fits Big Twin models 1941-99 (OEM 26348-36) . . . . . . . . . . . . . . . . . . . . . . . $1.99 740-475 (3) Ball, check valve. Fits Big Twin 1936-99, Sportster® models 1954-76 (OEM 8873) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $.99 740-062 (4) Oil pump assembly. Fits Big Twins 1973-91 (USA) . . . . . . . . . . . . . . $411.99 740-955 (5) Drive shaft fits 1936-67 Big Twin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99 740-953 (5) Drive shaft fits 1936-67 Big Twin (+.005) . . . . . . . . . . . . . . . . . . . . . . . . $54.99 740-700 (5) Drive shaft. Fits Big Twin 1968-99 (OEM 26346-69, 26346-70) . . . . $23.99 740-030 (6) Idler gear, supply (outer). Fits Big Twin 1968-99 (OEM 26326-62A)$38.99 434-155 (6) Oil pump idler gear inner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $38.99 740-673 (7) Drive gear, supply (outer). Fits Big Twin 1968-99 (OEM 26328-74) $34.99 740-672 (8) Drive gear, return (inner). Fits Big Twin 1968-99 (OEM 26315-68A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.99 7400395 (9) 1967-76, feed fitting (OEM 63533-41) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.99 7400322 (10) Elbow fitting, chrome. Fits Big Twin 1968-99 (OEM 26338-68) . . . . $3.99 740-746 (11) Oil pump shaft seal, fits Big Twin 1968-99 . . . . . . . . . . . . . . . . . . . . . . . $3.99 740-619 (12) Relief valve. Fits Big Twin late 2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=23http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=23Oil Pump Fittings and Parts 740-226 6 7 740-284 1 22 13 8 18 11 16 21 20 4 4 740-281 740-368 Oil Pump Repair Kits for 1936-2003 Big Twin and Sportster® Repair kits include new components that allow you to totally rebuild/refurbish any 1936-99 Big Twin or 1952-90 XL oil pump. Gasket/seal kits are available to complete the job. Made in the USA. Note: For 1991-98 XL oil pumps, use gasket 432-565, O-ring 432-566 and snap ring 740-676. 740-368 Shaft/bushing 1970-91 Big Twin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99 740-284 Gasket/bushing 1983-90 XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.99 740-283 Gasket/bushing 1977-82 XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.99 740-281 Gasket/seal kit with Paper gaskets 1992-99 Evolution® Big Twin. . . . . $11.99 740-280 Gasket/seal kit with Mylar gaskets 1981-91 Big Twin. . . . . . . . . . . . . . . . $11.99 740-282 1968-80 Big Twin, paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99 740-588 1981-91 Big Twin, paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99 430-906 Gasket/seal kit for 1968-80 Big Twin (mylar gaskets) . . . . . . . . . . . . . . . . $9.99 740-075 1948-67 Big Twin (paper). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99 740-076 Gasket/seal kit 1936-48 FL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99 740-279 Gasket/seal kit 1991-2003 XL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99 740-587 1977-90 XL, paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.99 740-586 1952-76 XL, paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99 434-185 1981-91 Big Twin gasket/seal kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99 Oil Pump Parts for 1952-2009 Sportster® The small and large parts are all sold each. Fits all 1952-2009 XLHXLCH Sportster®. 26 25 17 Additional Components for 1991-2009 XL Oil Pumps 432-565 1991-2003 XL oil pump mount gasket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.99 432-566 1991-2003 XL oil pump cover O-ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99 740-676 Oil pump snap ring with ears for oil pump shaft on 1991-2009 XL. . . . $1.99 B A C Oil Pump Breather Parts for 1937-79 Big Twin and Sportster® 740-970 740-974 7400340 740-631 740-585 740-686 740-528 1937-73 Flathead oil strainer kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99 (A, B, C) 1957-77 XL breather kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99 (A) Oil strainer 1954-76 XL (OEM 24975-37) 1937-73 Flatheads. . . . . . $14.99 Oil strainer pin for 1937-73 45" (OEM 333) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $.99 Gasket (OEM 24973-57) (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.99 (B) Oil transfer valve 1957-78 XL's (OEM 25075-55) . . . . . . . . . . . . . . . . . $17.99 (C) Breather pipe with chrome fitting nut 1954-79 XLH/XLCH (OEM 24912-52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.99 4000336 Crankcase Breather Filters Prevent the breather hose from inhaling impurities into the lower end while quieting the system. 4000337 Beneficial on 1975-99 models when the stock air cleaner has been replaced. Measures approximately 2" in diameter and 11/2" tall with steel baseplates and 3/8" ID hose barbs. Sold each. 4000336 Single inlet, pre-1993 Big Twin & pre-1991 XL . . . . . . . . . . . . . . . . . . . . . . $12.99 4000337 Dual inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=24http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=24Oil Pump Accessories E F H A B D A C G C I D J B Oil Filter Hardware for 1957-78 XLH, 1965-81 FL and 1971-81 FX Models 740-327 A-B-C-D-E-F-H (kit) . . . . . . . . . . . . . . . . . $21.99 740-094 (A/C) Upper seal kit (OEM 63881-67) Lower seal (OEM 63881-67, 63882-67) . . . . . . $11.99 740-464 (B) Element (OEM 63839-53) (each) . . . $4.99 740-643 (D) Spring (OEM 63831-67) (each) . . . . $1.99 740-093 (E) Cup lower (OEM 63846-67) . . . . . . . . $3.99 740-074 (F) O-ring (OEM 63879-53) (each) . . . . . $1.99 740-329 740-145 740-574 740-577 7400185 (G) As above with cup (kit) . . . . . . . . . . $32.99 (G) Cup (OEM 63826-53). . . . . . . . . . . . . $21.99 (H) Clip (OEM 63878-53) (each) . . . . . . . $1.99 (I) Dipstick (OEM 63885-65). . . . . . . . . . $12.99 (J) Chrome oil tank cap assembly (OEM 62610-52TA). . . . . . . . . . . . . . . . . . . $26.99 Tappet Oil Screen, Oil Pump Check Valve and Relief Valve Plugs For easy installation and removal of hex-head or allen chrome plugs. Available in 3-piece set or individually in A-Chrome Hex, BChrome Allen, C-Slot or D-Acorn for Big Twins. Made in the USA. Plug Sets 740-055 740-677 740-040 630-073 740-225 740-371 740-566 740-661 740-693 740-083 740-084 740-085 740-568 740-523 740-086 (A) 1970-80 (3 plugs) (3-pk) . . . . . . . . . $26.99 (A) 1981-96 (OEM 26263-80) (3-pk) . . $24.99 1952-65, (set of 2) . . . . . . . . . . . . . . . . . . . $21.99 1966-67, (3-pk) . . . . . . . . . . . . . . . . . . . . . . $21.99 (B) 1968-69, (3-pk). . . . . . . . . . . . . . . . . . . $29.99 (B) 1970-80, (3-pk). . . . . . . . . . . . . . . . . . . $26.99 (B) 1981-99 (Import) (3-pk). . . . . . . . . . $26.99 (C) Zinc 1981-96, all (OEM 26263-80) (3-pk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.99 740-663 (C) Chrome, 1980-99 (OEM 26263-80) (2 plugs, 2 washers). . . . . . . . . . . . . . . . . $19.99 740-176 (C) Cadmium, 1980-99 (OEM 26263-80) (2 plugs, 2 washers) (2-pk) . . . . . . . . . . $14.99 Oil Pump Gaskets and Master Rebuild Kits for 1937-99 Big Twin and Sportster® Oil Screen Parts Kit for 1952-62 Big Twin Master rebuild kits include seal, snap rings, springs, ball, inner and outer gasket, O-rings and keys. 1952-76 XL, paper. . . . . . . . . . . . . . . . . . . . $19.99 1977-90 XL, paper. . . . . . . . . . . . . . . . . . . . $12.99 *1941-49 Big Twin, paper . . . . . . . . . . . . . $24.99 *1948-67 Big Twin, paper . . . . . . . . . . . . . $17.99 *1968-80 Big Twin, mylar . . . . . . . . . . . . . $17.99 1968-80 Big Twin, paper. . . . . . . . . . . . . . $10.99 1981-91 Big Twin, mylar . . . . . . . . . . . . . . $17.99 1981-91 Big Twin, paper. . . . . . . . . . . . . . $10.99 1992-99 Big Twin, Paper . . . . . . . . . . . . . . $17.99 1937-73 SV 45", 74" & 80", paper . . . . . . $12.99 1984-91, S&S mylar. . . . . . . . . . . . . . . . . . . $17.99 1984-91 S&S paper. . . . . . . . . . . . . . . . . . . $26.99 1992-99 (Except Twin Cam®), S&S mylar. . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99 740-733 1992-99 (Except Twin Cam®), S&S paper . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99 *Note: Springs not included. 740-586 740-587 740-356 740-358 740-359 740-282 740-360 740-588 740-361 740-357 740-618 740-367 740-366 Includes all parts shown 740-055 screen, 740-040 housing body, (OEM 8856) ball, (OEM 24992-52) spring, (OEM 24987-52) plug, and 740-371 washer. Sold each. 740-373 Complete Kit. . . . . . . . . . . . . . . . . . . . . . . . . $39.99 740-055 Screen (OEM 24975-52) . . . . . . . . . . . . . . $19.99 740-677 Cork seal, (OEM 24990-52) . . . . . . . . . . . . . $1.99 740-371 Brass washer (OEM 24994-52). . . . . . . . . . $3.99 740-040 Housing body (OEM 24985-52) . . . . . . . $17.99 740-225 Spring (OEM 24992-52) . . . . . . . . . . . . . . . . $2.99 630-073 Check Ball (OEM 8856) (USA) . . . . . . . . . . . $.99 740-566 Screen plug, cadmium, 1952-65 (OEM 24987-52) (USA) . . . . . . . . . . . . . . . $10.99 Check Valve Plugs 740-159 (A) 1936-80, (OE2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=25http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=25Drain Plugs, Valves and Breather Gears S&S Style Crankcase Breather Reed Valve Power Kits for 1984-99 Evolution® Big Twin The Evolution® style breather valve replaces the standard rotary breather valve in Evolution® Big Twin style engines. Installation is fast and simple. No aligning timing marks and no rotating parts. Unlike the rotary breather valve, the S&S crankcase breather reed valve is not dependent on rotation of the crankshaft to open and close. The reed opens when the pressure in the crankcase becomes greater than the pressure in the cam chest. Installation of the breather reed has actually stopped high rpm oil carry-over in test engines with marginal piston ring seal. Made in the USA. 433-189 Standard diameter . . . . $99.99 433-190 +.030 oversize for damaged engines. . . . . . . . . . . . . . $109.99 Hotop® Chrome Aluminum Oil Drain for 1986-99 FXST/FLST Drain mounts cleanly and easily to the rear of the tranny mounting plate. Utilizes existing OEM hardware (mounting bolt and hose clamp). Works on stock bikes as well as those running wide tires with offset transmissions. Includes barbed oil line fitting and hex drive pipe plug. Made in the USA. 740-323 Billet oil drain . . . . . . . . . $46.99 740-669 432-619 432-622 S&S Breather Gears for 1984-99 Big Twin Get better dimensional stability with S&S steel breather gears. Damaging abrasive particles are less likely to get embedded in a steel gear body. The S&S steel gear has a welded-in screen with larger diameter holes as compared to the stock steel gear with screen and smaller holes. The result is improved airflow/oil scavenging from the flywheel side. Your crankcase flywheel cavity vacuum and oil scavenging are further improved by optimized breather window timing. S&S gears are available for all 1936-99 OHV engines (except Twin Cam®) in standard and +.030" oversize for repair jobs. Kits include breather gear and steel end play shims kit. Made in the USA. S&S Crankcase Breather Valves for Twin Cams® Heres an effective and economical solution to oil carry-over problem in Twin Cam® engines. The S&S crankcase breather valve not only eliminates oil carryover, but provides a slight increase in midrange horsepower. It's easy to install when changing cams or servicing the oil pump. The valve is simple but ingenious. It consists of a machined billet aluminum body which contains four steel reed valves. The valve body slides over the pinion shaft and inside the pinion bearing bore, contained between the pinion bearing outer retaining ring and the oil pump. The reed valves allow air and oil mist to escape from the crankcase, but do not allow them to re-enter. Two styles available. Made in the USA. Note: Not made for Twin Cam B engines. Designed to be used with stock oil pump and tappets. 432-619 1999-2002 Twin Cams® . . . . . . . . . . . . . . . . . . . . . $103.99 432-620 2003-09 Twin Cams® . $106.99 740-547 Aluminum Oil Drain Valves Drain valves are made of ‘6061’ aluminum that has been heat-treated to ‘T6’. Permanently replaces your stock drain plug and fits all OEM or aftermarket oil tanks with 5/8"-18 threads. Simplifies changing oil. Just attach a piece of 1/2" ID hose to the spigot and turn with a wrench until oil flows into your catch pan. When done, turn the spigot clockwise to close, and remove the hose. Sold each. Made in the USA. Note: Will not fit FLT models, hits side cover. 740-669 Natural . . . . . . . . . . . . . . . $32.99 740-547 Black. . . . . . . . . . . . . . . . . . $34.99 600-998 Standard Sizes 432-622 For L1977-99 cam (OEM 25313-77A/B) . . $109.99 432-623 For 1939-E53 cam (OEM 25300-36) . . . . . $111.99 432-624 For 1948-E77 cam (OEM 25313-73) . . . . . $111.99 +.030 Oversize 432-625 For L1977-99 cam. . . . $102.99 432-626 For 1939-E53 cam. . . . $111.99 432-627 For 1948-E77 cam. . . . $111.99 431-542 740-582 740-379 JIMS® Breather Valves for 1948-99 Big Twin Aerospace-quality steel breather valves with very precise breather timing. An excellent upgrad2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=26http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=26Crankcase Breathers 431-335 431-685 741-272 4300400 Engine Breather Oil Collector Most experienced builders know the problem of oil mist being expelled from the crankcase (especially true of modified or big inch stroker motors). This oil finds its way everywhere- pipes, rear wheel, frame, etc. No matter where you put the vent hose, it will eventually make a mess. The Engine Breather Oil Collector (EBOC) solves the problem by collecting the oil and allowing you to drain it when necessary. Made from billet aluminum. Internally baffled with breather filter included. Can be used in conjunction with Spyke or Hayden PCV valves. Overall 5", canister size 23/4" with 11/2" diameter. Drain plug is on bottom. Made in the USA. 431-335 Polished billet . . . . . . . $139.99 431-336 Chrome billet . . . . . . . . $159.99 431-940 4300145 4300150 Doherty® Powervents for 1991-2009 Models Poor crankcase breathing robs power and can lead to blown gaskets. The genuine PowerVent from Doherty® Machine is the finest positive displacement breather for V-Twin® motorcycles. It installs easily, with no drilling or internal modifications required. Fully machined from aluminum and show polished, they work with most popular carburetors and fuel injection units: Keihin CV, Harley-Davidson®, Mikuni, and S&S Super ‘E’ and ‘G’. Made in the USA. Note: Does not fit 1999-2001 EFI touring models or 2008-09 FLT. 741-277 Crankcase Breather Assemblies Best Sellers! Feuling Oil Tank Breather Kits Stop dipstick blowout. Releases power robbing pressures from oil tank and crankcase, reduces blow-by. Promotes proper oil flow and oil tank function. Braided steel lines and stainless steel fittings, breather line is coated with clear pvc. Lifetime warranty breather element. Available in stainless or black finish. Gasket, thread sealant, necessary hardware and installation instructions included. Dyna® models require removal of the transmission/oil tank cover. Early FLT models require removal of dipstick housing - new gaskets are supplied. Made in the USA. 741-272 Stainless, fits 1999-2005 Dyna® . $119.99 741-273 Black, fits 1999-2005 Dyna® . $129.99 741-274 Stainless, fits 1999-2001 FLT. . . . $119.99 741-275 Black, fits 1999-2001 FLT. . . . $129.99 741-276 Stainless, fits 2002-09 FLT . . . . . . $189.99 741-277 Black, fits 2002-09 FLT . . . . . . $189.99 Choose from three great styles of crankcase breather assemblies. They look great and help keep foreign material out of the bottom end! Each comes complete with a one-piece filter molded to a lightweight decorative end cap, a Chrome Chrome base with a 5/16" inlet that accepts the standard 3/8" crankcase hose, and a hose clamp. The hose clamp holds the filter to the base when the vent hose is installed. Fits pre-1993 Big Twins and pre-1991 Sportsters® or any model with a 3/8" ID crankcase breather hose. Also ideal for custom bikes or air cleaners that don't have breather fittings. Original Inline PowerVent Original universal inline kit comes with all hardware needed to install into breather hose. 431-685 Universal inline kit . . . $103.99 Chrome Crankcase Breather Features a bolt for attaching to any flat surface. Prevents breather hose from inhaling any impurities while riding. Fits 3/8" hose. Sold each. 4000325 Crankcase Breather. . . . $19.99 PowerVent Twin Kits Twin Kits include a pair of PowerVents and required hardware to install on both cylinder head breather outlets. 431-940 1993-99 Evolution® Big Twin . . . . . . . . . . . . . $179.99 431-337 1999-2009 TC 88® . . . . $179.99 432-545 1991-2006 Sportster® $179.99 Breather Kits 4300150 Faceted filter Kit. . . . . . . $19.99 4300400 Slotted filter kit . . . . . . . $18.99 Replacement filters 4300145 Faceted with end cap. . . $9.99 A K&N Crankcase Breather Protects lower end with 2" diameter x 11/2" high filter with Cotton Fiber base plate and 3/8" hose fitting. Filter oil pack included. Made in the USA. 402-040 Fits 3/8" breather hose with Chrome top and stud mount. . . . .2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=27http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=27Oil Lines and Kits 7200574 7200165 American Iron Horse Braided Oil Line Kit for 2003-04 Stalker Models Stainless braided oil line kit with male chrome ends. Kit includes: (1) 243/8" x 1/8" NPT/1/4" NPT ends; (1) 161/2" x 90° 1/8" NPT/1/8" NPT; (1) 111/2" x 1/8" NPT/1/8" NPT; and (1) 10" x 1/8" NPT/1/4" NPT. Made in the USA. 991-079 Braided oil line kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.99 Braided Fuel and Oil Hose Can be used for any oil and gas applications. Available in 3', 6', 10' and 25' lengths. Hose ends sold separately on page 913. Reinforced Black Fuel and Oil Line Neoprene fuel and oil line for all models. This top-quality line is reinforced with high strength rayon. The Neoprene outer cover resists oil and grease for years of trouble-free service. Made in the USA. Reusable Universal Oil Line and Components These premium-quality Goodridge reusable universal oil lines and components, including chrome steel fittings and Teflon® hoses, are offered individually so you can build the kit to suit your needs. Fittings are used with Goodridge stainless steel braided PTFE-lined hose to provide optimal performance for any Big Twin. 740-940 12 feet, #6 Stainless Steel Teflon® hose . . . . . . . . . $117.99 740-945 Replacement oil line washer . . . . . . . . . . $8.99 Stainless Steel, Natural/Silver 7400150 7400151 7200300 7200574 7400152 7200160 740-535 740-544 7400400 740-203 740-224 7400195 240-417 7400200 7200165 7400415 720-384 1/4" 740-469 5 Foot Sections 740-469 3/8" x 5 feet . . . . . . . . . . . . . $4.99 3 Foot Sections 720-134 x 3 feet . . . . . . . . . . . . $3.99 720-632 1/4" x 3 feet . . . . . . . . . . . . . $2.99 5 720-631 /16" x 3 feet . . . . . . . . . . . . $2.99 3/16" 25 Foot Sections 720-451 1/4" x 25 feet . . . . . . . . . . $23.99 720-102 5/16" x 25 feet. . . . . . . . . . $29.99 x 3'. . . . . . . . . . . . . . . . $18.99 x 3' . . . . . . . . . . . . . . . $24.99 3/8" x 3'. . . . . . . . . . . . . . . . $19.99 1/4" x 6'. . . . . . . . . . . . . . . . $34.99 5/16" x 6' . . . . . . . . . . . . . . . $34.99 3/8" x 6'. . . . . . . . . . . . . . . . $38.99 1/4" x 10' . . . . . . . . . . . . . . $29.99 5/16" x 10'. . . . . . . . . . . . . . $71.99 3/8" x 10' . . . . . . . . . . . . . . $66.99 1/4" x 25' . . . . . . . . . . . . . . $68.99 5/16" x 25' . . . . . . . . . . . . $148.99 3/8" x 25' . . . . . . . . . . . . . $149.99 5/16" Black Nylon x 6'. . . . . . . . . . . . . . . . $33.99 x 6' . . . . . . . . . . . . . . . $32.99 x 6'. . . . . . . . . . . . . . . . $33.99 3/8" x 25' . . . . . . . . . . . . . $139.99 1/2" x 3', (for oil tank drains) . . $24.99 5/16" 3/8" 1/4" Chrome 740-023 Vent Lines for 1999-2006 Twin Cam® Replace those unsightly stock vent lines from the motor to the oil tank. These lines have a higher-luster chrome finish, and also match other Russell™ ProSystem lines. 720-045 1999-2005 Dyna® solid line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.99 740-023 2002-06 FLHT, FLHR, FLTR, braided line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $64.99 741-390 1999-2001 FLHR/FLT/FLH braided line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $41.99 740-941 740-942 740-943 740-944 Tank stub fitting . . . . . . $24.99 Straight 1/8" NPT fitting $24.99 45° 1/8" NPT fitting. . . . . $36.99 90° 1/8" NPT fitting. . . . . $36.99 Oil Line Cover for 2000-06 Softail® and Twin Cam® The factory did a nice job with the chrome and die-cast metal exposed oil lines on Twin Cam® Softail® models, but they forgot about the plain rubber line on the right side beneath the oil tank. Slick, 2-piece chrome cover dresses it up nicely. 740-880 Oil line cover. . . . . . . . . . $39.99 Russell™ Stainless Steel Performance Hose with Hose Ends Includes 8' of 3/8" stainless steel hose and eight chrome Tube-Seal™ hose ends, more than enough for most standard applications. However, for bikes with oil coolers or2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=28http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=28Oil Lines 7400111 Male Flare Male NPT Full Flow Straight Full Flow Full Flow 45° 90° Pro System Black Cloth Hose 7400110 740-265 7400312 740-463 Russell™ Pro System Universal Hoses and Fittings Russell™ Pro System Universal Hose is the perfect choice for professionals and performance enthusiasts who want high-quality plumbing. Pro System is lighter and easier to assemble than traditional braided steel hose and features a fabric outer braid over a durable rubber core. A full line of matching black aluminum hoses and adapter fittings are available for a great look. Chrome Rocker Oil Lines for Big Twin and Sportster® Perfectly chromed replacement rocker box oil lines for Sportster® and Shovelheads. Includes complete set of fittings and seals (2 lines). 7400110 1966-84 Shovelheads (OEMs 62783-66A, 62785-66A) . . . . . . . . . . . . . . . $19.99 7400111 1957-85 Sportster® (except magneto models) (OEM 17324-57A). . . $15.99 740-265 1957-70 Sportster® magneto models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29.99 Full Flow 741-225 Full flow #6 straight hose end assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99 741-226 Full flow #6 45 degree° swivel hose end assembly . . . . . . . . . . . . . . . . . . $33.99 741-227 Full flow #6 90° swivel hose end assembly . . . . . . . . . . . . . . . . . . . . . . . . . $38.99 Male Flare 741-228 741-229 741-230 741-231 741-232 741-233 #6 male flare to 1/8" male NPT 45° adapter. . . . . . . . . . . . . . . . . . . . . . . . . . $22.99 #6 male flare to 1/4" male NPT straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99 #6 male flare to 1/8" NPT straight adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99 #6 male flare to 1/4" male NPT 90° adapter. . . . . . . . . . . . . . . . . . . . . . . . . . $14.99 #6 male flare to 1/8" male NPT 90° adapter. . . . . . . . . . . . . . . . . . . . . . . . . . $13.99 #6 male flare to 1/4" male NPT 45° adapter. . . . . . . . . . . . . . . . . . . . . . . . . . $13.99 Rocker Box Oil Line Fittings Includes chrome fittings and seals for the rocker box oil lines on all 1957-85 Sportster® and Shovelheads. 7400312 Rocker box oil line fittings (set of 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.99 740-463 Oil line sleeve, 1936-1999 (OEM 26348-36) (pair). . . . . . . . . . . . . . . . . . . . . . $.99 Pro System Individual Oil Lines Made for special applications when a stock oil line kit won't work. Pre-assembled, individual 3/8" braided stainless steel Teflon® oil lines with rubber compression fittings. Fits 3/8" single barb nipple only, will not fit threaded nipples. Overall length shown, including the fittings. Replacement seals for compression fittings sold separately. 740-227 740-228 740-204 740-205 740-206 740-207 740-208 740-209 740-210 8" . . . . . . $34.99 9" . . . . . . $34.99 10" . . . . . $34.99 11" . . . . . $36.99 12" . . . . . $36.99 13" . . . . . $36.99 14" . . . . . $36.99 15" . . . . . $37.99 16" . . . . . $37.99 740-211 740-212 740-215 740-216 740-217 740-218 741-335 741-336 741-337 17" . . . . . $37.99 18" . . . . . $39.99 20" . . . . . $39.99 22" . . . . . $39.99 741-338 34" . . . . . $42.99 24" . . . . . $42.99 741-339 36" . . . . . $42.99 26" . . . . . $42.99 740-407 Replacement 28" . . . . . $42.99 compression 30" . . . . . $42.99 fitting seals 32" . . . . . $42.99 (12-pk) $16.99 Male NPT 741-234 1/8" Male NPT to 1/8" female NPT 45° adapter . . . . . . . . . . . . . . . . . . . . . . . $16.99 741-235 1/8" male NPT to 3/8" straight barb adapter. . . . . . . . . . . . . . . . . . . . . . . . . . $12.99 741-236 1/8" male NPT to 1/8" female NPT 90° adapter . . . . . . . . . . . . . . . . . . . . . . . $13.99 Pro System Black Cloth Hose 741-237 Pro System black cloth hose, 6' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.99 741-238 Pro System black cloth hose, 10' . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2009-06-16T23:40:18+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=29http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/OilTanks/?Page=29Russell™ Oil Line Kits for 1986-2003 Models Billet Boys Double and Triple Oil Line Clamps Maintain that smooth and clean look with these double and triple oil line clamps. Made to hold your oil lines together with these two piece clamps. Features chrome with decorative notches. Fit a line up to 7/16" OD. Made in the USA. 741-005 Double . . . . . . . . . . . . . . . $39.99 741-006 Triple . . . . . . . . . . . . . . . . . $46.99 Oil Line Accessories 2400677 2400678 740-703 740-637 740-690 740-704 740-636 1994-2003 fits all XL. . $149.99 1986-90 fits all XL . . . . $199.99 1991-94 fits all FXR. . . $182.99 1987-90 fits all FXR. . . $211.99 1992-98 fits all Dyna® $199.99 741-157 Engineered to replace stock hoses and outdated clamps. Designed to fit OEM oil tanks, but may work on aftermarket tanks. Finished in high-luster chrome. Made in the USA. 740-698 Late 1992-99, fits all FXST and FLST . . . . . . . . . . . . $167.99 740-688 1990-E92 fits all FXST and FLST . . . . . . . . . . . . $244.99 740-689 1987-89 fits all FXST and FLST . . . . . . . . . . . . $199.99 2400676 Goodridge V-Twin® Universal Oil Lines and Adapters 741-166 Custom Hose Clamps These custom hose clamps feature a great look with reliable function. Under each custom hose cover is a weather-resistant worm-drive hose clamp. Sold in 6-packs. 2400676 3/8" ID, slotted . . . . . . . . . $32.99 2400677 1/4" ID, slotted . . . . . . . . . $32.99 2400678 1/4" ID, grooved. . . . . . . . $32.99 Oil Line Adapter for 1999-2009 Twin Cam® Simplifies installation of rubber or braided lines. Mirror-polished 316 stainless steel. Sold each. 741-210 For all Twin Cam A models . . . . . . . . . . . . . $64.99 ® Universal oil lines are available in various lengths with female chrome swivel fittings, which mate to the 741-167 universal oil adapters to assemble complete V-Twin® oil lines. These durable, yet attractive oil lines feature premium stainless steel braided hose with a PTFE liner, and the female swivels and adapters are crafted from show-quality chrome steel. Developed with the professional builder or do-it-yourselfer in mind, this high-end, yet affordable product range simplifies installation work and adds great looks to any bike. And best of all, they are covered by the exclusive Goodridge “Forever Warranty.” Note: Oil line lengths are determined by measuring the distance between the flares of the female swivel fittings. To simplify measurements you can deduct 2" from overall measurement of the hoses. Universal Oil Lines 741-150 741-151 741-152 741-153 741-154 741-155 6" . . . . . . $37.99 7" . . . . . . $37.99 8" . . . . . . $37.99 9" . . . . . . $39.99 10" . . . . . $39.99 11" . . . . . $39.99 741-156 741-157 741-158 741-159 741-160 741-161 13" . . . . . $42.99 14" . . . . . $42.99 15" . . . . . $42.99 16" . . . . . $42.99 17" . . . . . $42.99 19" . . . . . $46.99 741-162 741-163 741-164 741-165 20" . . . . . $47.99 21" . . . . . $47.99 24" . . . . . $47.99 26" . . . . . $49.99 Custom Oil Line Clamp Chrome oil line clamp is designed to fit 5/16" and 3/8" braided hoses 3300721 Oil line clamp, Chrome (each). . . . . . . . . . . . . . . . . . $3.99 Adapter 741-166 Straight -6 JIC to 1/8” NPT . . . . . . . . . . . . . . . . . . . . . . . . $6.99 741-167 Straight -6 JIC to 1/4” NPT$7.99 741-168 45° -6 JIC to 1/8” NPT . . . $12.99 741-169 45° -6 JIC to 1/4” NPT . . . $14.99 741-170 90° -6 JIC to 1/8” NPT . . . $12.99 741-171 90° -6 JIC to 1/4” NPT . . . $12.99 7200215 7400335 7400301 Billet ‘Oil Star’ Line Holder Keeps y o u r oil lines clean and organized. Takes up to 3 oil lines and fits them into 1 bundle. Comes in polished billet aluminum. Fits 3/8" or 5/16" oil lines. Sold each. Made in the USA. 740-782 Billet Oil Star line holder . . . . . . . . . . . . . . . . . . . . . . . $39.99 Hose Separators Available in plain or with slots to match other custom accessories, these Aluminum hose separators will fit 3/8" or 5/16" ID rubber or stainless steel oil and fuel lines on Big Twin 2009-06-16T23:40:18+02:00