http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/RSS.ashxJP Cycles PagesTue, 16 Jun 2009 23:24:54 +0200http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=1http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=1Fenders2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=2http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=2Milwaukee Twins™ Fenders 710-285 710-463 711-315 Milwaukee Twins™ Strutless Fenders for 1985-2005 Softail® Style Frames Self-supporting 14-Gauge steel fenders are the cure-all for every custom builder. Fender mounting is fast and prep for painting is minimal. All fenders feature welded-in dual wiring tubes and built-in electrical boxes. Available 9" and 11" wide for Softail® Evolution® or Twin Cam 88B™ style frames. Struts do not include 711-318 710-462 710-289 mounting hardware. NOTE: Stock fender struts will have to be cut off frame to install these fenders. 1985-99 Evolution® 710-286 710-465 711-315 9" W . . . . . . . . . . . . . . . . $581.99 711-316 11" W . . . . . . . . . . . . . . . $579.99 2000-05 Twin Cam 88B™ 711-317 9" W . . . . . . . . . . . . . . . . $591.99 711-318 11" W . . . . . . . . . . . . . . . $609.99 711-319 Milwaukee Twins Round Top Universal Front Fenders for Wide Glide® ™ Heavy-duty 14-Gauge steel fenders are the ideal match for today’s 21-inch tires. They are made by a deep-draw process resulting in a single cohesive structure that is able to take the abuse of hard-riding American bikers. Note: Correct fitment of these fenders requires care in measuring and positioning the fender before drilling holes for the mounting bolts. Short Front Fender 710-285 710-286 710-461 710-462 710-287 710-288 710-289 710-463 710-464 710-465 710-466 Undrilled, 43/4" W for 21" wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $126.99 Drilled, 43/4" W for 21" wheels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $129.99 Undrilled, 51/2" W for 21" wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $127.99 Drilled, 51/2" W for 21" wheels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99 Trimmed, 43/4" W for 21" wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99 Untrimmed, 43/4" W for 21" wheels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99 Square-cut bottom, 43/4" W for 21" wheels . . . . . . . . . . . . . . . . . . . . . . . . $149.99 Trimmed, 41/2" W for 21" wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99 Trimmed, 51/2" W for 21" wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99 Untrimmed, 41/4" W for 21" wheels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99 Untrimmed, 51/2" W for 21" wheels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99 Milwaukee Twins™ Custom Fenders with Externally Welded Struts for 1985-2005 Softail® Style Frames 711-321 Stretched Front Fender Heavy-duty 14-Gauge steel fenders have externally welded struts, providing substantial strength with clean, flowing lines. These fenders eliminate the need for drilling and for the time-consuming fitment of the fender to the frame. Available in 9" and 11" width. Struts do not include mounting hardware. NOTE: Stock fender struts will have to be cut off frame to install these fenders. 1985-99 Softail® 711-319 9" W, for 180/200 . . . . $419.99 711-320 11" W, for 230/240/250 tire . . . . . . . . . . . . . . . . . . . . . $463.99 Trimmed 711-323 2000-05 Softail® 711-321 9" W, for 180/200 Twin Cam® . . . . . . . . . . . . . . . . . . . . . $539.99 Trimmed 711-331 Untrimmed 711-332 Untrimmed 711-324 Milwaukee Twins™ Round Top Rear Fenders for Rigid Frames These wide and stylish rigid frame fenders are available in 9", 11" and 121/2" widths, and made of thick 14-gauge steel, deep-drawn for a single formed shape with no welds! All feature a reinforced tip area for taillight and/or license plate mounting. Available in full untrimmed or ready-to-mount trimmed versions. Note: Correct fitment of these fenders requires care in measuring and positioning the fender before drilling holes for the mounting bolts. Milwaukee Twins™ Round Top Rear Fenders for Custom Wide Tire Softail® Style Frames Top quality r2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=3http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=3Custom Fenders Gambler 711-044 711-032 Racer Cruiser 711-030 Pro Street 710-319 Midway 711-123 711-171 Maverick 711-172 Duster 2000R 711-038 Wernimont Custom Rear Fenders for Swingarm and Rigid Frames These heavy-gauge steel fenders are available in seven popular widths. All feature wiring tubes and each is inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork required on your part. Made in the USA. custom rear fenders come undrilled so can position them Frames to look and work best for your Measurements are approximate. 11"Note: WideWernimont for Rigid Frames 81/ 2"you Wide for Swingarm 101application. /2" Wide for Swingarm Frames 711-038 2000R, left-side chain cutout (For use with 230/240mm tire), 36" . . . . . . . . . $384.99 711-035 2000R, right-side drive, 36" . . . . . . . . $372.99 711-172 711-173 711-050 711-052 711-124 710-317 711-490 710-538 711-175 711-174 711-054 711-061 710-318 Duster, 451/4" . . . . . . . . . . . . . . . . . . . . . . . $338.99 Maverick, 34" . . . . . . . . . . . . . . . . . . . . . . . $299.99 Gambler, 331/2" . . . . . . . . . . . . . . . . . . . . . $338.99 Stinger, 331/2". . . . . . . . . . . . . . . . . . . . . . . $307.99 Midway, 375/8" . . . . . . . . . . . . . . . . . . . . . . $334.99 Pro Street, 31" . . . . . . . . . . . . . . . . . . . . . . $364.99 Longshot, 421/2" . . . . . . . . . . . . . . . . . . . . $338.99 Pro Street with Light Kit, 31" . . . . . . . . $714.99 Duster, 451/4" . . . . . . . . . . . . . . . . . . . . . . . $338.99 Maverick, 34" . . . . . . . . . . . . . . . . . . . . . . . $309.99 Gambler, 331/2" . . . . . . . . . . . . . . . . . . . . . $338.99 Stinger, 331/2". . . . . . . . . . . . . . . . . . . . . . . $334.99 Pro Street, 31" . . . . . . . . . . . . . . . . . . . . . . $364.99 710-334 710-336 710-337 710-338 710-539 711-032 711-030 711-255 711-034 710-319 Racer, 303/4" . . . . . . . . . . . . . . . . . . . . . . . . $412.99 Gambler, 34". . . . . . . . . . . . . . . . . . . . . . . . $421.99 Stinger, 331/2". . . . . . . . . . . . . . . . . . . . . . . $397.99 Longshot, 421/2" . . . . . . . . . . . . . . . . . . . . $408.99 Pro Street with Light Kit, 31" . . . . . . . . $749.99 Racer, 303/4" . . . . . . . . . . . . . . . . . . . . . . . . $421.99 Cruiser, 431/2" . . . . . . . . . . . . . . . . . . . . . . . $421.99 Gambler, 331/2" . . . . . . . . . . . . . . . . . . . . . $414.99 Stinger, 351/2". . . . . . . . . . . . . . . . . . . . . . . $376.99 Pro Street, 31" . . . . . . . . . . . . . . . . . . . . . . $389.99 12 1/2" for Rigid Frames 710-327 2000R, left side drive . . . . . . . . . . . . . . $389.99 11" for Swingarm Frames 13" Wide for Rigid Frames 710-522 2000R-RSD, Right Side Drive, 371/2". $414.99 71/4" for Swingarm Frames 711-171 Maverick, 34" . . . . . . . . . . . . . . . . . . . . . . . $322.99 711-044 Gambler, 331/2" . . . . . . . . . . . . . . . . . . . . . $338.99 711-123 Midway, 375/8" . . . . . . . . . . . . . . . . . . . . . . $324.99 9" for Swingarm Frames 13" for Swingarm Frames 710-540 Pro street with Light kit, 31". . . . . . . . . $749.99 710-320 Pro Street, 31" . . . . . . . . . . . . . . . . . . . . . . $389.99 Note: Correct fitment of these fenders requires care in measuring and positioning the fender before drilling holes for the mounting bolts. Long ‘Slim Jim’ on Softail® Frame 711-114 ‘Sheriff’ on Softail® Frame 711-145 ‘Sheriff’ on 4-speed Frame 711-147 Short ‘Slim Jim’ on 4-speed Frame 711-149 Milwaukee Iron Strutless Fenders for 1965-99 Softail® and 4-Speed Big Twin These fenders have beefy, built-in supports to replace the traditional fender struts. Heavy-gauge, steel supports are blended into the fenders for a great illusion. A custom seat pan may be required for use with these fenders. All fenders require the removal of the frame horns to which the struts are normally attached. Painted for illustration purposes only. Made in the USA. 2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=4http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=4Custom Front Fenders Duster 710-168 Maverick 710-169 Gambler 710-065 Outlaw 710-170 Long O.F.C. 710-315 Wernimont Custom Front Fenders Wernimont fenders feature heavy-gauge steel construction in five popular widths. Each is inspected by a master fender builder to assure straightness, consistency and a flawless finish requiring an absolute minimum of finishing bodywork. Made in the USA. Note: Correct fitment of these fenders requires care in measuring and positioning the fender before drilling holes for the mounting bolts. Rambler 710-330 Cobra 710-064 43/4" Wide Fenders for 21" Wheels 710-064 711-164 710-068 710-547 710-315 710-548 Cobra . . . . . . . . . . . . . . . $199.99 Stinger . . . . . . . . . . . . . . $239.99 Long Shot . . . . . . . . . . . $259.99 Stubby . . . . . . . . . . . . . . $247.99 Long O.C.F. . . . . . . . . . . $254.99 Rambler . . . . . . . . . . . . . $254.99 61/4" Wide Fenders for 16" Wheels 710-171 710-200 711-041 711-043 711-042 710-329 Duster . . . . . . . . . . . . . . . $229.99 Maverick. . . . . . . . . . . . . $242.99 Gambler . . . . . . . . . . . . . $254.99 Stinger . . . . . . . . . . . . . . $254.99 Long Shot . . . . . . . . . . . $254.99 Cobra for 2000-07 Deuce™ . . $244.99 Rambler for 2000-07 Deuce™ . . $244.99 Long O.C.F. . . . . . . . . . . $254.99 Stubby . . . . . . . . . . . . . . $254.99 Rambler . . . . . . . . . . . . . $254.99 Long Shot 710-066 5" Wide Fenders for 21" Wheels 710-521 Cruiser . . . . . . . . . . . . . . $374.99 710-330 61/2" Wide Fender for 21" Wheel 710-725 with 21" front wheels FLT style . . . . . . . . . . . . . $259.99 43/4" Wide Fenders for 19" Wheels 710-065 710-066 710-551 710-552 Gambler . . . . . . . . . . . . . . $254.99 Long Shot . . . . . . . . . . . . $254.99 Stubby. . . . . . . . . . . . . . . . $247.99 Rambler . . . . . . . . . . . . . . $254.99 51/2" Wide Fenders for 3" x 21" Wheels 710-530 710-554 710-555 710-556 710-557 710-558 710-730 Long O.C.F. . . . . . . . . . . $254.99 Stubby . . . . . . . . . . . . . . $254.99 Rambler . . . . . . . . . . . . . $254.99 Gambler . . . . . . . . . . . . . $254.99 Longshot . . . . . . . . . . . . $247.99 Duster . . . . . . . . . . . . . . . $247.99 Long, Flared . . . . . . . . . $254.99 710-537 710-549 710-550 61/4" Wide Fenders for 18" Wheels 710-531 710-532 710-533 710-534 710-535 710-536 Stubby . . . . . . . . . . . . . . $254.99 Rambler . . . . . . . . . . . . . $254.99 Longshot . . . . . . . . . . . . $254.99 Gambler . . . . . . . . . . . . . $254.99 Stinger . . . . . . . . . . . . . . $254.99 Long O.C.F. . . . . . . . . . . $254.99 991-109 43/4" Wide Fenders for 19"/21" Wheel 710-168 Duster . . . . . . . . . . . . . . . . $254.99 710-169 Maverick . . . . . . . . . . . . . . $254.99 710-170 Outlaw . . . . . . . . . . . . . . . $254.99 61/2" Wide Fenders for 16"/18" Wheels 710-520 Cruiser . . . . . . . . . . . . . . $396.99 710-495 with 16" or 18" front wheels FLT style . . . . . . . . . . . . . $259.99 Spear Front Fender for 1980-2009 Wide Glide® and Softail® This Spear front fender gives your stock 7100246 or custom bike a new tougher look. Made to fit stock Wide Glide® front ends 1980-2009 as well as most custom and aftermarket custom Wide Glide® front forks. Available with chrome or raw mounting bracket with mounting holes pre-drilled. Create a new daring look on your bike with the Spear front fender. (Except 2000-07 Deuce™, 2006-08 FXDWG, 2008-09 Rocker™ and 2009 Crossbones™). 7100245 w/ chrome bracket mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $54.99 7100246 w/ Raw mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $48.99 991-108 Milwaukee Iron Slim-Jim Front Fender for 1980-2009 Wide Glide® and Softail® Models The Milwaukee Iron Slim-Jim front fender fits 1980-2009 Wide Glide® and Softail® models. It is made with heavy-gauge steel. Made in the USA. 991-108 Slim-Jim Front Fender, 1980-2009 Wide Glide® and Softail® Models (e2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=5http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=5Details see page 1086 Stock Replacement Front Fenders 7100045 Dresser® Style Fender for 1980-2009 Wide Glide® Front Ends The 16" front wheel is the latest rage on Wide Glide® front ends, and this high-quality metal fender is the perfect finishing touch. Painted for illustration purposes only. 7100080 FXST, FXSTC, Dyna Wide Glide® and 4-speed FXWG 1980-2009 (except 2006-09 Dyna®) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $129.99 710-117 7100150 7100261 Steel Front Fender for 1990-2009 Fat Boy® This perfect reproduction of the FLSTF-style front fender comes raw, ready to paint with minimal prep. Fits any FLST front end using a 16" wheel assembly. Can be adapted to fit any 1980-2009 FL style fork by using our fender adapters. 7100261 FLSTF front fender . . . . . . . . . . . . . . . . . . $109.99 711-096 Chrome fender adapters . . . . . . . . . . . . . $78.99 711-097 Raw fender adapters . . . . . . . . . . . . . . . . . $68.99 Early Style Front Fenders for 1973-2009 Narrow Glide® Big Twin and Sportster® Original-style front fenders for 1973-2009 FX, FXR, and Dyna Glide® models (except 2006-09 Dyna®) and 1973-2009 Sportster® (except 1973-E74). Available as a stock replacement or with the front tip cut back for a trimmer look. Both fenders come complete with chrome brackets and the rivets necessary to install them. 5" wide. Painted for illustration purposes only. 7100150 Stock replacement (OEM 59007-73TB, 59111-74) . . . . . . . . . $58.99 7110336 Stock replacement bracket (OEM 59111-74). . . . . . . . . . . . . . . . . . . . . . $29.99 7100045 Shortened custom fender . . . . . . . . . . . . $47.99 7100085 Shortened custom bracket (for 7100045 only) . . . . . . . . . . . . . . . . . . $22.99 7110335 7100090 Front Fenders for 1988-2006 FXSTS Original style steel fenders fit OEM front ends using OEM hardware only. 7110335 1993-2006 FXSTS (Replaces OEM 59176-96A). . . . . . . . . . . $67.99 710-117 1988-92 FXSTS (Replaces OEM 59176-88) . . . . . . . . . . . . $44.99 Front Fenders for 1986-2009 Heritage® Softail® Replacement fender fits Heritage® Softail® models from 1986-2009, as well as all Fat Boy® models when a full fender is desired. 61/2" wide. Heavy-duty braces riveted to fender shell. Choose exact duplicate of original equipment fender with all holes and dimples for stock lighted fender tips and trim: or smooth style without holes and dimples for custom applications. Tips and trim not included. 7100090 Stock replacement (OEM 59129-86) . $114.99 7100095 Smooth-style fender. . . . . . . . . . . . . . . . $114.99 710-272 Springer® Front Fenders for 1937-48 Big Twin Custom Replacement Front Fender for 1994-2009 Road Glide® and Road King® Heavy-gauge steel construction fenders are personally inspected by a master fender builder to ensure straightness, consistency, and a flawless finish with an absolute minimum of finishing bodywork required. Comes pre-drilled for easy installation. Made in the USA. 710-495 with 16" or 18" front wheels FLT style. . . . . . . . . . . . . . . . . . . . . . . . . . . . $259.99 An accurate, faithful reproduction of the original fender. Complete with braces and fender edge ‘reveal’. For all 1937-48 Big Twin. (Replaces OEM 59000-36) Painted for illustration purposes only. 710-272 Springer front fender . . . . . . . . . . . . . . . $109.99 Front Fender for 1954-84 FL A precisely-crafted reproduction of the 1954-84 4-speed Dresser® front fender with properly rolled edges and structural reinforcement. Will also fit FLT and FLHT models when additional trim holes are drilled. Painted for illustration purposes only. 7100065 1954-84 4-speed FL models. . . . . . . . . $107.99 Colony Front Fender Mounting Kit Cadmium reproduction of the stock hardware used to mount Springer front fenders on 1936-48 Big Twin. Made in the USA. 710-191 1936-48 Spring fork, cadmium. . . . . . . . $19.99 710-060 1936-48 Locks only, cadmium . . . . . . . . $19.99 9172009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=6http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=6Stock Replacement and Custom Front Fenders Late-Style Narrow Front Fenders for 1973-2009 Models Custom front fender for all 7100100 1973-2009 FX, FXR, ® ® Sportster and Dyna Glide (except 2006-09 Dyna®) models equipped with 35mm or 39mm front forks. Fender comes unpainted with your choice of chrome or raw side mount brackets. For use with 18", 19" or 21" rims. (Replaces OEM 58998-83). Our Best-Selling Front Fenders! $39.99 7100190 Painted for illustration purposes only. 7100130 For 1949-84 Big Twin FL Custom, unpainted steel narrow FXWG-style front fender for all 1949-84 4-speed FL model front forks. Complete with chromed integral mounting brackets, the fender profile is designed to clear 18", 19" and 21" tires. Note: will not fit converted narrow glide forks. 7100130 Front fender . . . . . . . . . . . . . . . . . . . . . . . . . $44.99 For 1980-2009 Wide Glide® and Softail® A trim, tire-hugging fender complete with chrome brackets, ready to paint. A reproduction of the original equipment front fender, fits all FXST, FXSTC, Dyna Wide Glide® (except 2006-09 Dyna®, 2008-09 Rocker™ & 2009 Crossbones™) and 4-speed FXWG models, 1980-2009. (Replaces OEM 59924-80). Note: Will not fit converted narrow glide forks. 7100190 Wide Glide® fender. . . . . . . . . . . . . . . . . . . $42.99 7100180 For 1973-2009 FX, FXR, Sportster® and Dyna Glide® (except 2006-09 Dyna® and 2009 XR1200) 7100100 With chrome brackets. . . . . . . . . . . . . . . . $39.99 7100105 With steel brackets. . . . . . . . . . . . . . . . . . . $39.99 7100235 Front Fender for 1949-2009 FL Touring Models Stock style replacement steel front fenders come complete with heavy-duty mounting brackets installed. Fits 1949-2009 FLH, FLT, FLHT & FLHR. 7100235 1987-99, replica. . . . . . . . . . . . . . . . . . . . . $119.99 710-411 1979-86, replica. . . . . . . . . . . . . . . . . . . . . $152.99 710-412 1987-99, OEM (Replaces OEM 59093-87) . . . . . . . . . . . $447.99 710-413 2000-09 FL Touring Models (Replaces OEM 59093-00) . . . . . . . . . . . $252.99 710-414 2000-09 FL Touring, no holes . . . . . . . . $186.99 711-500 OE primer, with trim holes 1949-84 4-speed Big Twin with Wide Glide® forks and 16" tire . . $333.99 711-501 Replica raw, with trim holes 1949-84 4-speed Big Twin with Wide Glide® forks and 16" tire . . . $98.99 711-502 Fender, without brackets. . . . . . . . . . . . $106.99 711-503 1979-84 with fender tip indent and trim (OEM 59093-79) . . . . . . . . . . . $118.99 Custom Skirted Fender with Flip for 1973-2009 Big Twin and Sportster® Based loosely on the skirted early K model front fender, this timeless classic has been updated to fit all 35mm and 39mm front forks from 1973-2009 Big Twin and Sportster® (except 2006-09 Custom Fender for 1980-2009 Wide Glide® Front Ends An exclusive fender with a custom look to fit Wide Glide® front ends. Styled with an added accent bead around its entire edge. Comes with polished aluminum spacer blocks. Use with 21" wheels only. Painted for illustration purposes only. 7100120 Bolt-on version replaces the stock front fender on Dyna Wide Glide® (except 2006-09 Dyna®) or Softail® (except Heritage® Fat Boy® and Springer®) and 4-speed FXWG 1980-2009 . . . . . . . . . . $139.99 Dyna®). Painted for illustration purposes only. Note: Cannot be used on bikes with highway bars. 7100180 53/4" wide, unpainted . . . . . . . . . . . . . . . $102.99 FXR Regulator Relocation Bracket Keeps the fender from contacting the regulator when the suspension is compressed. A must for lowered models, and recommended for models using 7100180. 382-533 1982-99 FXR regulator relocation bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99 Front Fender for 2000-07 Deuce™ 710-083 711-410 This fender fits FXSTD 2000-07 with 18", 19", or 21" wheels. (Repl. OEM 59876-00). Sold each. 710-083 Chrome fender and bracket . . . . . . . . . . $59.99 711-079 Raw Steel fender w/chrome-plated bracket . . . . . . . . . . . . . . . . . . .2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=7http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=7Details see page 1086 710-455 Custom Front and Rear Fenders 710-457 710-458 710-459 Sumax Front and Rear Fenders Sumax lightweight composite glass fenders are manufactured using space-age fabrics and resins for structural strength. Front fenders come in wide and narrow glide styles. They are available in designs with universal fitment, determined by the mount width between the fender rails. Rear fenders noted for 2000-05 FXST models feature a cut-out to accept your electronic control module. Tire size and mount tab width are noted in fender description. Rear fenders are stress tested to withstand 28,000 PSI before breakage. Painted for illustration purposes only. Made in the USA. 711-278 711-279 Dagger Fender 710-455 Front for Wide Glide® 21" wheel w/ 7" Mount tab . . . . . . . . . . . . . . . . . $159.99 710-456 Front for Narrow Glide 19" Wheel w/ 41/2" Mount Tab . . . . . . . . . . . . . $159.99 Hugger Fender 710-457 Front for Wide Glide® 16" wheel w/ 41/2" Mount tab . . . . . . . . . . . . . . . $197.99 710-458 Front for Narrow Glide® 19" Wheel w/ 41/2" Mount Tab . . . . . . . . . . . . $157.99 Lo-Boy Sweeper 710-459 710-460 711-276 711-277 Front Wide Glide® 16" w/ 61/2" Mount tab . . . . . . . . . . . . . . . . . . . . . . . . . $199.99 Front for Narrow Glide 19" Wheel w/ 41/2" Mount Tab . . . . . . . . . . . . . $194.99 Rear, Universal w/ 71/4" Mount Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $263.99 Rear, 2000-05 FXST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $266.99 Dominator 711-278 Rear, 2000-05 FXST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $189.99 Pro Comp Smoothee 711-279 Rear, 2000-05 FXST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $189.99 711-504 711-505 710-420 710-421 710-424 711-526 710-423 711-527 710-425 711-528 711-529 710-427 710-426 710-428 Fat Kid Steel Front Fenders for 1949-2009 Big Twin These raw front fenders fit 16" wheels on 41mm Glide 1949-2009 FLH, FXWG, FLT, FXDF and Softail®. Sold each. 711-504 1980-86 FXWG. . . . . . . $165.99 711-505 1949-84 FLH . . . . . . . . . $159.99 711-526 1986-99 FLSTF, 1980-99 FXWG-FXST . $107.99 711-527 Smooth, 1986-99 FLSTF, 711-530 Strutless Rear Fenders for 1984-99 Softail® 2mm thick steel strutless fenders for 1984-99 models. They come raw and ready to start your customizing process. Fits 1984-99 Softail® frames when width is 11" where original struts attach. Choose from four widths for tires from 150 to 250. Note: Requires removal of the stock frame strut horns. 710-420 710-421 710-423 710-424 71/4" 150 tire . . . . . . . . . $338.99 71/4" 160 tire, short . . . $338.99 81/2" 180 tire . . . . . . . . . $338.99 9" 200 tire, narrow sidewall. . . . . . $338.99 710-425 9" 200 tire, wide sidewall . . . . . . . . $338.99 710-426 9" 200 tire, tapered. . . $338.99 710-427 11" 250 tire, tapered . $338.99 710-428 11" 250 tire, narrow sidewall. . . . . . $338.99 1980-99 FXWG-FXST . $106.99 711-528 1980-2009 FLT . . . . . . . $128.99 711-529 2000-09 FLSTF . . . . . . . $233.99 711-530 2008-09 FXDF. . . . . . . . $106.99 9192009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=8http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=8Rear Custom Fenders 7110305 711-491 Details see page 1086 AZZ Pounder Custom Sport Bob® Rear Fender Kits for for 1979-2009 Sportster® (except XR1200) These complete steel fender kits include a cateye taillight assembly with mounting bracket. They look great with the one-piece Sport Bob® gas tank from our Gas Tank section. Fenders are 7" wide and use your stock struts. (Will not fit XR1200). Painted for illustration purposes only. 711-036 1979-81 Sportster® . . . . . . . . . . . . . . . . . . $225.99 7110305 1982-93 Sportster® . . . . . . . . . . . . . . . . . . $159.99 711-491 1994-2003 Sportster® . . . . . . . . . . . . . . . . $159.99 710-392 2004-09 Sportster® . . . . . . . . . . . . . . . . . . $232.99 Classic Sentry Quick Bob™ Rear Fender for 1957-78 Sportster® A unique steel fender that converts the look of a stock XL rear fender to a FXWG-type bobbed rear fender. This fender uses XL sissy bar side straps, but because of its wider width an 81/4" FX style sissy bar back must be used. 7110350 Rear Fenders for Custom Use Designed with the custom builder in mind, these rear fenders feature smooth sides with undrilled mounts so that the exact placement can be determined by the installer. Made from .080" thick stamped steel and include a phosphate-etched surface to help prevent corrosion and provide an excellent surface for most primers. Note: Fenders may require modification to clear belt drive. Note: Correct fitment of these fenders requires care in measuring and positioning the fender before drilling holes for the mounting bolts. Chrome fender struts with hardware, license plate/taillight mount and “Cat Eye” taillight must be ordered separately to complete installation. 7110350 Quick Bob™ rear fender only, 61/2" wide . . . . . . . . . . . . $154.99 3400105 7110351 Quick Bob™ rear fender struts only, hardware kit 7100250 sold separately (pair) . . . . . . . . . . . . . . . . $139.99 340-200 License plate/taillight mount . . . . . . . . . . . . . . . . $62.99 3400105 “Cat-Eye” taillight . . . . . . $27.99 Note: Components cannot be interchanged with OEM or other aftermarket parts. Shown with struts and taillight bracket, sold separately 9" Fenders 711-057 Custom . . . . . . . . . . . . . . . . . . . . . . . . . . . . $186.99 711-056 Classic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $186.99 711-059 Sentry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $186.99 11" Fenders 711-031 Custom . . . . . . . . . . . . . . . . . . . . . . . . . . . . $196.99 711-029 Classic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99 711-033 Sentry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $196.99 AZZ Pounder 340-200 710-162 9", fits Big Twin® rigid equipped w/chain or belt drive . . . . . . . . . . . . . . . $219.99 711-203 Arlen Ness Legacy Fenders for Softail® If you like the styling of the Heritage® Softail® models, you'll love this hot fender from Arlen Ness. The Legacy is a redesign of the stock rear fender fitted to Heritage® Softail® models. It is about 4" longer at the rear and has wider skirting for a solid full look. It is constructed of fiberglass and 710-470 available in two widths - the 81/2" wide fender requires custom fender struts. Matching front fender carries the Legacy look to Wide Glide® front ends. Made in the USA. Drilling required. Painted for illustration purposes only. Please check fit and clearance before drilling and painting. Rear Fenders 711-203 71/2" . . . . . . . . . . . . . $227.99 711-204 81/2" wide. . . . . . . . $197.99 Matching Front Fender Fiberglass 61/2" fender is designed to fit 16", 17", or 18" wheels. 710-470 Legacy front fender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $227.99 Custom Round Profile Fenders These custom fenders are available in 71/2" up to 11" to give you the opportunity to find just the right look for your motorcycle. Comes in raw steel. 81/2" thru 11" fenders may require spacing. 710-406 712009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=9http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=97110161 7110165 Front and Rear Fenders 1986-2005 Softail® Rear Fenders An exact duplicate of the original equipment Heritage® Softail® rear fender. Features turn signal mounting holes already located and includes the taillight mount and fender reveal. This fender is ready to use as an original equipment replacement item or for FXST models wanting to convert to full one-piece fenders. Will require fender struts, light bar and turn signals. Also available in a smooth version with only fender strut holes in it when custom taillights are desired. Painted for illustration purposes only. 7110175 Stock style, fits 1986-99 Heritage® Softail® (OEM 59126-86B), 7" wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . $112.99 7110176 Smooth style (no taillight mount), fits all 1986-96 Softail® as a custom fender, 7" wide . . . . . . . . . . $112.99 711-303 Stock style, fits 2000-05 Heritage® Softail® (OEM 59144-00). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $239.99 7110160 Rear Fender for 1973-85 FX Detailed reproductions of the original equipment 4speed FX rear fenders from 1973-85 (except Softail®). Available with or without mounting bracket for 1973-98 taillight assembly in ‘bobbed’ and standard styles. 61/2" wide. Painted for illustration purposes only. 7110160 Original style with light mount . . . . . . . $64.99 7110161 Original style without light mount . . . $64.99 7110165 Custom bobbed . . . . . . . . . . . . . . . . . . . . . $64.99 Note: Taillight, visor and license mounting bracket are not included and are shown for illustration purposes only. 7110175 Benchmark Front Fender for 1984-2009 Models 710-617 Fenders are predrilled to fit 16" or 18", or for a very radically custom look, 21" front wheels on your stock 1984-2009 Softail®. Or, they may be used in a variety of custom applications. Stamped from 14-gauge steel, these 61/2" wide fenders are E-coated to prevent rust and corrosion. The use of precision deep drawn stamping technology ensures a consistent flawless finish while minimizing body work. 1984-2009 Softail® and Custom (except 2000-06 FXSTD, all FXSTS/FLSTS, 2008-09 Rocker™ and 2008-09 Crossbones™). No mounting blocks required. Made in the USA. 710-617 16" or 18" front wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $269.99 710-618 21" front wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $269.99 7110170 Dresser® Style Rear Fenders for 1982-94 FXR These steel fender designs combine the classic styling of the Heritage® Softail® with the popular rubber-mount design of the FXR. They mount between the stock fender struts of all FXR models from 1982-94, and are available smooth or with a mount for the 1973-98 style taillight. Original equipment sissy bar kits may be used with these fenders. Painted for illustration purposes only. 7110170 With 1973-98 taillight mount, 7" . . . . $134.99 7110171 Smooth, no taillight mount, 7" . . . . . . $134.99 Fender Mount Blocks for mounting these fenders on 1983-2008 FLT, FLHT, FLHR, FLHX 710-619 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $93.99 710-620 Raw Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $81.99 Rear Fender for 2000-05 FXST Softail® This steel rear fender with stock mounting holes fits 2000-05 FXST Softail®, (except Deuce™ models). The perfect fender for repairing crash damage or for taking off your original painted fender to replace with a custom painted fender. Accepts stock fender struts and hardware. Painted for illustration purposes only. Sold eac2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=10http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=10Replacement Rear Fenders License plate assembly not included. 7110180 7110090 3400245 Fat Bob® Rear Fenders for 1980-86 FXWG and 1984-99 Softail® Exact duplicates of the OEM pieces. These fenders include all of the wire loom clips and necessary strut mounting holes just like stock. They also accept stock taillight assemblies as well as our custom “Cateye” and “Lucas” taillights and brackets. The 7110185 and 7110300 Fat Bob® fenders for Softail® models are perfect for crash repairs or converting from the full fenders on Heritage® models. Painted for illustration purposes only. Hinged Rear Fender for 1958-84 Big Twin FL Swingarms These two-piece hinged fenders fit 1958-84 4-speed Big Twin FL frames. One version is smooth with no taillight mount and the other has the 1973-98 mount, permitting the use of a variety of taillights. They also fit FX models if FL struts are used and can be adapted to FXWGs. Painted for illustration purposes only. 7110090 With no taillight mount (OEM 59604-65A) . . . . . . . . . . . . . . . . . . . $109.99 7110145 With 1973-98 taillight mount (OEM 59604-69B) . . . . . . . . . . . . . . . . . . . $139.99 7110115 One-Piece Rear Fenders for 1980-84 Big Twin FL These are reproductions of the one-piece rear fenders used on 1980-84 4-speed FL models. They're available in two versions, one of which is smooth with no taillight or turn signal mounts permitting the use of a variety of taillights and the other has the 1973-98 taillight mount but no turn signal mounts. Fender strut mounting holes are drilled for easy mounting and alignment. Painted for illustration purposes only. 7110115 No taillight mount, 71/2" wide . . . . . . . $114.99 7110155 With 1973-98 taillight mount, but no indentations for the turn signal bar, 71/2" wide . . $132.99 Fenders 7110180 Fits 1980-86 FXWG 7" wide (OEM 59904-80). . . . . . . . . . . . . . . . . . . . . . $76.99 7110185 Fits FXST, FXSTC, FXSTS and Bad Boy® 1984-96 7" wide (OEM 59914-86A) . . . $89.99 7110300 Fits FX Softail® 1997-99 (OEM 59753-97) . . . . . . . . . . . . . . . . . . . . $124.99 Rear Fenders for Early 1959-78 Sportster® Steel rear fenders with stock mounting holes in the sides for Sportster® models from 1959-78. Note: Taillight and license mounting bracket are not included and are shown for illustration purposes only. Painted for illustration purposes only. 7110135 Original style without taillight hole, 61/2" wide. . . . . . . . . . . . . . . . . . . $99.99 7110140 1959-72, 61/2" wide with cutout (OEM 59611-67A) . . . . . . . . . . . $99.99 7110141 1973-78, 61/2" wide (OEM 59611-73A) (uses 1973-98 taillight only) . . . . . $69.99 7110135 7110140 License Plate Brackets 3400370 Black (OEM 59993-80) . . . . . . . . . . . . . . . . $36.99 3400371 Chrome (OEM 59993-80TA). . . . . . . . . . . $44.99 3400245 For Fat Bob® fenders 7" wide with cateye taillight . . . . . . . . . . . . . . . . . . $56.99 3400195 For Fat Bob® fenders 7" wide with lucas taillight . . . . . . . . . . . . . . . . . . . $37.99 3400125 Fits FXST, FXSTC, FXSTS, Bad Boy® 1984-99 & 4-speed FXWG 1980-86 w/Fat Bob® rear fenders 1980-99. Also fits 7110180, 7110185 and 711-275 Fat Bob® rear fenders 7" wide. . . . . . . . . $79.99 7110141 Taillights 3400140 Stock style taillight, chrome (OEM 68008-73A) . . . . . . . . . . . . . . . . . . . . $29.99 Rigid Rear Fender for 1936-48 Big Twin An accurate reproduction of the rigid rear fender used on 1936-48 overhead valve Big Twins. Perfect detail and complete with brackets ready to bolt on. 71/2" wide. Painted for illustration purposes only. 7110126 Big Twins 1936-48 (OEM 59604-39). . $134.99 7110352 Original Style Rear Fenders for 1979-2009 Sportster® Original style replacement rear fenders for Sportsters®. These steel rear fenders are intended for use with stock type taillights, struts, and existing hardware. Painted for illustration purposes only. 7110320 Sportster® models 1979-81, 61/2" wide (OEM 59674-79A) . . . . . . . . . . . . . . . . . . . . $55.99 72009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=11http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=11710-625 Custom Fenders Quick Bob Rear Fender for 1973-85 FX ™ Bagger Fender for 1997-2008 Touring and 1986-2009 FX Softail® Models B a g g e r fiberglass fender for 1997-2008 Touring and 1986-2009 FX Softail® Models with fender that lays over your stock fender and fills the gap between the bags and the frame. Attaches to the seat mount and under your seat. Now just add your favorite taillight. Made in the USA. Note: Taillight 340-265 sold seperately on page 344. Note: Correct fitment of these fenders requires care in measuring and positioning the fender before drilling holes for the mounting bolts. 710-625 1997-2008 FLT . . . . . . . . . . . . . . . . . . . . . . $209.99 710-626 1986-2009 FXST . . . . . . . . . . . . . . . . . . . . $209.99 Smooth 711-485 Custom Quick Bob™ rear fender for an easy, affordable conversion to the Fat Bob® look. Fits stock 4-speed FX frames and uses the stock width fender struts. Cannot be used as a replacement fender on FXWGs. Heavy-gauge metal for lasting service. Use with taillights 3400195 or 3400245 (page 340). Painted for illustration purposes only. 7110110 1973-85 FXs (except FXWG, FXST), 7" wide . . . . . . . $83.99 710-294 Smooth 711-484 Smooth 711-483 9" One-Piece Custom Rear Fender This true one-piece 9" wide custom rear fender is made from one solid piece of heavy-gauge steel. No seams down the middle to finish or even out. It comes undrilled to allow builder to position and fit to their taste and application. Also included with fender are two internally mounted wire tubes to help hide and protect the rear wiring. Note: Correct fitment of these fenders requires care in measuring and positioning the fender before drilling holes for the mounting bolts. 7110281 9" rear fender. . . . . . . . . . . . . . . . . . . . . . . $134.99 Fat Bob® Rear Fenders for 1994-2003 Sportster® These Fat Bob® rear fenders will give your 1994-2003 Sportster® a custom look. They’re raw steel and 7" wide, and each has the taillight and license plate mount attached in the rear of the fender. Two versions are available: one with mounting holes that allow you to attach them directly to OEM fender struts. The second version comes un-drilled for custom applications. Note: Correct fitment of these fenders requires care in measuring and positioning the fender before drilling holes for the mounting bolts. 710-293 OEM pre-drilled fender . . . . . . . . . . . . . $149.99 710-294 Custom un-drilled fender . . . . . . . . . . . $149.99 Round Profile Chopper Fender Features round British style and a raw steel finish. For custom applications. Ribbed 711-486 Note: Correct fitment of these fenders requires care in measuring and positioning the fender before drilling holes for the mounting bolts. Smooth 711-484 5" wide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $143.99 711-483 6" wide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $118.99 711-485 7" wide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $135.99 Ribbed 711-486 7" wide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $135.99 Ribbed Front Steel Fenders ‘Desperado’ Rear Fender This rear fender is truly one of a kind. It measures 9" with 400mmradius and is especially made for 16" and 18" wheels and up to 200 series tires. Made of raw, heavy 18-gauge steel. Note: Correct fitment of these fenders requires care in measuring and positioning the fender before drilling holes for the mounting bolts. 710-230 Desperado fender . . . . . . . . . . . . . . . . . . $269.99 711-078 710-675 Bicycle Style Rear Fender Here’s a cool rear fender for 16" tires. Measures 51/2" wide with the edges rolled as shown. Very minimalist and wraps around the tire great. Undrilled for universal fitment.you fab the mounts. Made from raw steel. Note: Correct fitment of these fenders requires care in measuring and positioning the fender before drilling holes for the mounting bolts. 710-671 Rear Fender . . . . . . . . . . . . . . . . . . . . . . . . $138.99 By popu2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=12http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=12Custom Rear Fenders 711-250 Custom Fat Bob® Rear Fenders Original style universal and custom application fenders. Available with left or right-hand chain cutaway and with or without taillight mount. Fenders measure approximately 38", 7" wide and 51/2" deep. We recommend using 3400105 (page 340) Cateye taillights with 7110105 and 7110101 fenders. 711-287 Universal Steel Rear Fenders and Supports Plain Fenders (411/2" L x 13" H) In 5" or 6" widths. Great for trailers too. 711-211 7110279 Painted for illustration purposes only. Note: Correct fitment of these fenders requires care in measuring and positioning the fender before drilling holes for the mounting bolts. 7110271 Left Chain Cutaway Fits Big Twins and bikes with chain on the left side. 7110100 Without taillight mount, 7" wide. . . . . . $74.99 7110101 With taillight mount, 7" wide . . . . . . . . . $83.99 Right Chain Cutaway Fits Sportster® models in custom frames and bikes with the chain on the right side. 7110271 Without taillight mount, 7" wide. . . . . . $69.99 7110105 With taillight mount, 7" wide . . . . . . . . . $74.99 Fender Support A chrome support brace designed for use with custom Fat Bob® fenders when installing them on rigid frames. (Not shown) 711-211 Chrome fender support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.99 711-250 5" wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $37.99 711-287 6" wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $48.99 Supports For use with 5" or 6" flat fenders on rigid frames. 7110279 Plain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32.99 7110278 Chrome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $38.99 711-211 Chrome fender support . . . . . . . . . . . . . . $32.99 Rear Fenders for 2006-09 Softail® Models with 200 Rear Tire 710-646 710-645 91/2" wide stock Softail® fender is available with or without taillight assembly and is pre-drilled with no spacer required. Flat mounting surface for electronic panel and made from heavy gauge steel construction. Painted for illustration purposes only. Sold each. 710-645 Fender Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $364.99 710-646 Fender with taillight . . . . . . . . . . . . . . . . . . . . . . . . . . $744.99 LED Taillight, Turn Signal and License Plate Kits All-in-one chromed taillight holder and license plate frame. Aluminum license plate frame has a modified cateye-style LED unit that doubles as both taillight and turn signals. Use your OEM plugs, or splice it into existing wiring harnesses. This cleanlooking kit can be used on OEM fenders, custom fenders or various custom applications. It requires the use of one of the raw finish mounting pockets listed below and sold separately. 340-265 With LED lights taillight/signal, license plate kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99 340-266 Flush mount weld-in pocket for custom use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.99 340-267 71/4" OEM flush mount pocket (bolt on) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.99 340-268 Universal pocket (bolt on) . . . . . . . . . . . $99.99 340-269 Swingarm pocket (weld on). . . . . . . . . . $99.99 340-335 Fender mount bracket for 1984-2005 FXST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $61.99 Wide Flat Fender Kits for 1984-99 Softail® Fenders with curved supports are just the size to cover fat tires. These custom fender supports have pre-drilled holes tapped from the inside to present a smooth finish. Fenders are ready to paint and mount after proper priming. Made in the USA. 701-256 81/2" Raw Steel fender supports. . . . . . . . . . . . . . . $215.99 711-053 9" Raw Steel fender supports . . . . . . . . . . . . . . . . . $194.99 Chica Custom Cycles Raised Rib Rear Fenders 2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=13http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=13Fender Accents and Fender Tips 710-014 710-570 Front tip 971-396 711-024 Jack Daniel’s® Old No. 7 Logo Rear Fender Tip for 1998-2009 FLT, FLHR, FLSTC and FLSTN Made of durable ABS plastic and chrome-plated. Fits 1998-2009 FLT, FLHR, FLSTC AND FLSTN (except FLSTS or FLTR Road Glide®). (Replaces OEM 59052-98). 710-654 Rear Fender Tip . . . . . . . $29.99 710-568 Eagle Fender Trim for 1990-2009 FLSTF Fat Boy® Models This solid brass fender trim is hand-polished and features finely detailed Eagle and graphics. “Harley-Davidson®” Includes mounting hardware and foam pad attached to underside of trim to resist scratches when installing. (Will not work with 2006-09 FLSTF with 200mm tire). 710-568 Rear, Chrome. . . . . . . . . . $32.99 710-570 Front, Chrome. . . . . . . . . $32.99 Rear tip 971-397 711-023 Flames Collection Fender Tips for 1980-2009 FL Models Ever since they began emerging on gas tanks a few decades ago, flames have been a symbol of custom styling. Now, Harley-Davidson® continues the tradition with the Flames Collection. Made of durable ABS plastic. Includes mounting hardware and installation instructions. Fits 1980-2009 FLT, FLHR, FLSTC, FLSTN models. (Replaces front fender lamp assemblies) (Does not fit FLSTS or FLTR Road Glide® models). 971-396 Front fender tip (OEM 59348-98) . . . . . . . $39.99 971-397 Rear fender tip (OEM 59315-98) . . . . . . . $39.99 Front tip 971-369 Die-Cast Chrome Fender Tips for 1978-84 Big Twin Available for front and rear. 710-014 1978-79 front (OEM 59216-59B). . . . . . $34.99 711-023 1978-79 rear (OEM 59887-78) . . . . . . . $34.99 710-015 1980-84 front (OEM 59216-78) . . . . . . . $35.99 711-024 1980-84 rear (OEM 59887-78) . . . . . . . $35.99 Jack Daniel’s® Old No. 7 Logo Front Fender Tip for 1998-2009 FLT, FLHR, FLSTC and FLSTN Made of durable ABS plastic and chrome-plated. Fits 1998-2009 FLT, FLHR, FLSTC AND FLSTN (except FLSTS or FLTR Road Glide®). (Replaces OEM 59002-98). 710-653 Front Fender Tip . . . . . . $29.99 711-382 Jack Daniel’s® Old No 7 Logo Front Fender Spear for 1980-2009 Touring Models and 1986-2009 Softail® Made of aluminum and chrome-plated. This self-adhesive medallion is easy to install. Fits all 1980-2009 Touring models and all 1986-2009 FL Softail® models (except 2009 FLSTSB). (Replaces OEM 91195-04). 710-650 Front Fender Spear. . . . $44.99 7100255 711-381 Rear tip 971-370 Smooth Fender Tips OEM Style Front 7100258 and Rear Fender Tips for 1978-84 Models These chrome die-cast fender tips are perfect for restoration projects on 1978-84 FL models or to add some flair to later model motorcycles. The 1200 style fender tips are the original style used on 1978-79 FL models. The 80 style fender tips are the original style used on 1980-84 FL models. The recessed area on each tip around the 80 and 1200 is painted black just like the originals. Sold each. Die-cast chrome fender tips have a smooth finish and fit 1980-84 FL models only. Front or rear. 711-381 Front fender trim. . . . . . $39.99 711-382 Rear fender trim. . . . . . . $39.99 ‘Live to Ride’ Collection Fender Tips for 1980-2009 FL Models Made of durable ABS plastic in chrome with gold finish. Includes mounting hardware and installation instructions. “Live to Ride, Ride to Live.” It has become a motto of the HarleyDavidson® nation, accompanying riders over millions of miles of travel. Jack Daniel’s® Front Fender Trim Kit Made of steel and chrome-plated. Hardware included. Fits 1982-2009 FL (except Road Glide® and Road King Custom®) and Jack Daniel’s® Front Fender Skirt for 1998-2009 FLHR, FLHRCI, FLHT, 1986-2009 FLSTC and 2006 FLST Made of steel and chrome-plated. Features the Old No 7 logo. Fits 1998-2009 FLHR, FLHRCI, FLHT, 1986-2009 FLSTC and 2006 FLST models (except FLSTSC). Hardware not included. 710-652 Front Fender Skirt . . . . . . . $57.99 1200 Style 7100255 Front . . . . . . . . . . . . . . . . . $36.99 7100256 Rear . . . . . . . . . . . . . . . . . . $36.99 80 Style 7100257 Front . . . . . . . . . . . 2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=14http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=14Front and Rear Fender Tips and Trim Küryakyn™ Fender Tips for 1983-2009 These fender tips add a nostalgic touch to any bike in seconds. Models are available to fit most OEM fenders. Simple installation requires no drilling and can be done without any tools. Also covers dinged fender tips. Sold each. Note: Not compatible with full coverage style fenders with chrome side bracing found on FXRT, and early Super Glide® models. 711-095 Chrome Front Fender Trim Fits Narrow Glide® front fenders on FXST, FXDWG FXD, FXR (except 2006-09 Dyna®) and Sportster® models (with FXR style fender) from 1973-2008. 711-094 710-111 7100200 Chrome front fender trim . . . . . . . . . . . . . . . . . . . . . . . $19.99 7110205 Fender Tips For Narrow Tire Front Fenders, 1983-2009 Sportster , 1986-2009 FXST, 1990-2009 FXD and 1993-2008 FXDWG ® 711-094 Leading edge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29.99 711-095 Trailing edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99 7110274 Fender Tips For Fat Boy® Style Fenders, 1990-2009 710-111 Front, leading edge . . . . . . . . . . . . . . . . . . . . . . . . . $29.99 710-112 Front, trailing edge . . . . . . . . . . . . . . . . . . . . . . . . . $29.99 711-141 Rear accent (except 2006-09 FLSTF with 200mm tire) . . . . . . . . . . . . . . . . . . . . . . . . . . $29.99 Fender Tips for 1995-2009 Baggers 710-695 Front, trailing edge (each) . . . . . . . . . . . . . . . . . . . $31.99 710-720 Front, leading edge (each) . . . . . . . . . . . . . . . . . . . $31.99 710-721 Rear Fender accent (each) . . . . . . . . . . . . . . . . . . . $31.99 7100035 7110280 7100040 Chrome Lower Front Fender Trim for 1949-2009 Big Twin This fender trim is an exact reproduction of the lower trim installed on FL models from 1968-75, but it is completely chrome-plated without the black accents as in the original equipment part. It may be installed on the bottom of the stock front fender fitted to all 1949-85 FL, FLT, FLHT and FLHS models. Comes complete with chrome mounting hardware. 7100040 Trim (OEM 59233-68) 1949-85. . . . . . . . . . . . . . . $19.99 7110280 Trim, fits 1986-2009 FLST . . . . . . . . . . . . . . . . . . $27.99 Lens Grills for 1980-2009 FLT, FLHR and 1984-2009 Softail® Fender Tip Lights 7110210 711-510 Chrome and Brass Fender Tips for 1934-48 Big Twin These fender tips are stamped in brass and then polished and triple chrome-plated. Tips are available in two sizes, and either plain or with an antique eagle embossing. The large fender tip fits all FL rear fenders from 1934-48 as well as many aftermarket front and rear fenders. The small fender tip will fit most OEM and aftermarket narrow front fenders. Fender tips are complete with mounting hardware. 711-511 K ü r y a k y n ’s ™ unique design embeds custom emblems in a bold chrome grill. Choose from Zombie, Maltese Cross, or Grooved 711-512 styles. Each easy-to-install set includes both front and rear lens grills. Fits 1980-2009 Dresser®, Road King® and Softail® models with fender tip lights. Sold in pairs. 711-510 Zombie Fender Tip Lens Grills. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.99 711-511 Maltese Cross Fender Tip Lens Grills. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.99 711-512 Grooved Fender Tip Lens Grills. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.99 710-180 Large (81/2" wide) 7110274 Chrome (OEM 59283-85T) . . . . . $19.99 7110205 Chrome with eagle (OEM 59282-85T) . . . . . $16.99 Small (61/2" wide) 7110210 Chrome (OEM 59281-85T) . . . . . $19.99 7100035 Chrome with eagle (OEM 59280-85T) . . . . . $16.99 710-564 Eagle Wing Fender Trim for 1990-2009 Fat Boy® Models 711-068 7100202 Chrome Front Fender Skirt Chrome for 1980-2009 FL Models Fender Tips for 1980-2009 Fatboy® with Full Fenders This rigid steel fender skirt, designed to replace the original factory equipped aluminum trim, is formed, polished, and chrome pl2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=15http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=15Front and Rear Fender Tips, Trim and Emblems 7100055 710-656 7100075 711-384 7100050 710-661 7110085 710-175 7100060 710-662 Vintage “V” Style Fender Tips and Trim for 1949-86 Big Twin Precise reproductions of front and rear fender tips and stainless steel trim pieces. The fender tips are die-cast, just like the original parts, in the correct ‘V’ design used as 1959-66 original equipment, and feature an outstanding chrome finish. The front fender side trim and front fender lower edge trim are formed in stainless steel, exactly duplicating the original pieces in both form and material. All required hardware is included. Can be fitted to all 1949-86 FL front fenders and all 1958-86 FL rear fenders. Sold each. 7100050 Front fender trim set (includes 7100055, 7100060), 7"-wide . . . . $38.99 7100055 Front fender tip “V” design (indexed for side spears), used from 1959-66, 7"-wide (OEM 59216-59) . . . . . . . $23.99 7100060 Front fender side spear set, 1957-73 (OEM 59205-57, 59206-57) . . . . . . . . . . . . . $23.99 7100075 Front fender lower trim, 1949-56 (OEM 59207-49) . . . . . . . . . . . . . . . . . . . . . . . $14.99 710-183 710-184 710-663 710-173 710-664 710-666 7110085 Rear fender tip ”V“ design, 1959-66, 73/4"-wide (OEM 59887-59) . . . . . $26.99 Jetglow Fender and Saddlebag Emblems These retro classic chrome molded emblems can be applied to any flat or slightly curved surface with the special die-cut double-sided automotive adhesive trim backing in a matter of minutes. Just peel the backing and stick for a weather/temperature/ car wash proof custom accent. These are replicas of OEM emblems and made with highest quality materials. Sold in pairs. Made in the USA. 710-656 RoadKill. . . . . . . . . . . . . . . $29.99 710-661 IndianDrifter . . . . . . . . . . $29.99 710-662 Classic . . . . . . . . . . . . . . . . $29.99 710-663 V-Twin® . . . . . . . . . . . . . . . $29.99 710-664 Custom . . . . . . . . . . . . . . . $29.99 710-666 RoadQueen . . . . . . . . . . . $29.99 Front Fender Trim Rail for 1986-2009 FL Models Features “V” design to fit 1986-2009 FLT, FLST AND FLHR models. Does not fit FLSTS. Chrome. 710-114 710-174 Emblems for 1948-65 Big Twin These sets feature clips or studs and nuts to attach to fender as original accessory, but can be mounted to fenders and saddlebags. Sold in pairs. 710-113 1987-2009 FLST, FLSTC and 1993-96 FLSTN (does not fit Springer models) . . . . . . . . . $71.99 710-114 1980-09 FLT, FLHT, FLHR FLHRC and 1980-93 FLHS (except 1998-2009 FLHX, FLTR and FLHRS) . . . . . . . . . . . . . . . . . . . . . $154.99 Nickel 710-183 Nickel, Deluxe (OEM 59196-41) . . . . . . . $36.99 710-184 Nickel, O.H.V. (OEM 59196-52) . . . . . . . $39.99 Chrome 710-174 Hydra-Glide® (OEM 91582-50) . . . . . . . $39.99 710-175 *Electra-Glide® (OEM 59196-65) . . . . . . . $32.99 710-173 Heritage® Softail® (OEM 14142-86) . . . . . . . $44.99 711-383 Ultra Classic® (OEM 59236-97) . . . . . . . $37.99 711-384 Road King® (OEM 14422-94) . . . . . . . $36.99 711-228 Speed Nuts (OEM 7613A) (10-pk). . $11.99 *Note: 710-175 require speed nuts 711-228. Rear Bar Accent for 1997-2008 Touring Models This rear accent bar allows you to cover up the void and mounting bosses after you have moved your license plate off of your rear bar. This accent bar provides a quick and easy, custom look for your bike. Fits all 1997-2008 Road King® (except FLHRSE), all 1998-2008 Road Glide®, and all 1997-2008 FLHT Standards. Also fits 2004 FLHTCSE if antenna is replaced. 840-241 Rear Bar Accent (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29.99 OUND R G E E R F ! . PINVG P ER $199 I SH RDERS O O L L A N (some ns exclusio apply) 99* RECEIV MBERS LUB ME C D L O PLUS! G TO VE ND SAA Y! OIN AV J E ERYD E UP 10% Fender Trim Rails for 1949-84 FL and FLH Chrome rails for 1949-84 FLH, front drum and disc models, and rear for 1958-84 FL models. Sold each. 7100230 710-194 710-193 711-243 710-071 Front, V design f2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=16http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=16Mud Flaps 711-108 7110355 Leather Mud Flap Black leather mud flap lined with waterproof ABS material. Fits 1988-2009 FLST, FLHT, FLH and FLT models. 7110004 Chrome studded with concho (OEM 59230-88) . . . . . . . $34.99 7110315 710-341 7110292 710-340 Studded Mud Flaps Strong mud flaps are highlighted by chromed steel studded perimeters. Medium measures 61/2" H x 91/2" W and offers a choice of plain or diamond design. Large measures 8" H x 101/2" W and is available with the diamond-like center only. 7110355 711-108 7110292 710-340 710-341 7110316 Med studded mud flap, diamond center . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99 Large studded mud flap, diamond center . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99 Med studded mud flap, plain center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.99 Large with conchos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.99 Med with conchos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22.99 Rear Fender Mud Flap with Studs Black mud flap with accenting decorative studs. Made in the USA. 710-636 Fits FLSTF, FLHS, FLHR, FLT, FLHT, FLTR, 1986-90 FLST and 1993-96 FLSTN (does not fit models with rear bumper rail). . . . . $33.99 Nylon-Reinforced Mud Flaps Available in 2 sizes, black with twoply Nylon reinforcement provides strength and longer life. Large flap fits rear fenders or Dresser® style front fenders; medium is designed to fit most stock front fenders. 7110315 Large. . . . . . . . . . . . . . . . . . . $9.99 7110316 Medium . . . . . . . . . . . . . . . . $8.99 Mud Flaps with Reflectors and Fringe A two-ply, nylon-reinforced rubber mud flap that features nickel chrome studs and reflectors, plus fringe at the bottom to complete the nostalgic look. Measures 91/2" tall with fringe and 91/2" wide. 711-125 Mud flap. . . . . . . . . . . . $29.99 711-126 710-075 710-631 710-632 Road King® Mud Flaps Mud flap features styling designed to complement the Road King Custom® model OE seat and leather saddlebags. Made in the USA. 7110003 Road King® Classic Rear Fender Mud Flap 711-110 711-109 710-633 710-631 1998-2009 FLHRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99 710-632 1979-2009 FLH, FLHT, FLT, 1998-2009 FLTR, 1979-93 FLHS and 1994-2009 FLHR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99 Sturdy, black rubber mud flap features the Road King Classic® logo. Mud Flaps for 1948-84 Big Twin Front and Rear Fenders Made from high-quality leather. Mounting hardware not included. Made in the USA. Black, rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15.99 White, rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.99 Brown, plain, leather (not shown). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99 Black with chrome sport leather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $52.99 Front narrow fender type, black with chrome spots, leather 51/4" x 61/2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.99 711-110 Black with blue dots, leather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $58.99 711-111 Black with red dots, leather (not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . $58.99 710-075 711-126 710-021 711-109 7110003 Note: J&P Cycles® is not a licensed Harley-Davidson® dealer nor do we intend to represent ourselves as being affiliated with Harley-Davidson®. The Harley-Davidson® products on this page are purchased by J&P Cycles® from a licensed Harley-Davidson® dealer. Road King® Classic Rear Mud Flap Mud flap features embossed leather to match the FLHRCI saddlebags and seat and includes Road2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=17http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=17730-745 Rear Fender Struts and Fender Braces 711-232 711-230 7110325 7110287 7110272 730-744 7110286 Chrome Fender Strut Sets for 1979-2009 Sportster® Made of die-cast alloy construction. Chrome 730-744 711-230 1979-81, Chrome (OEM 52754-79, 52755-79) . . . . . . . . . . $186.99 7110325 1982-89, Chrome with Black inserts (OEM 59950-81, 59951-81) . . . . . . . . . . . $66.99 711-232 1990-93, Chrome (OEM 59950-89, 59951-89) . . . . . . . . . . . $89.99 711-309 1994-2003 Chrome fender strut cover only (OEM 59896-94, 59897-94) . . . . . . . . . . . $63.99 710-740 2004-09 Chrome (except XR1200) (OEM 59902-04 and OEM 59903-04). $134.99 711-176 Allen bolt set for 1982-93 struts . . . . . . $13.99 711-215 1990-93, reflector, Red (OEM 59259-90). . . . . . . . . . . . . . . . . . . . . . $14.99 7100225 Chrome Fender Strut Sets Fully-chromed rear fender struts for 4-speed Big Twin, Sportster® and K models from 1954-86. All sets are formed from high-grade steel and pre-drilled with the correct mounting holes before polishing and plating. Can be used to mount custom, reproduction or original equipment fenders. Note: Hardware is not included, but is available as listed below. 7110286 FX 1972-85 - 2 holes (not countersunk) . . . . . . . . . . . . . . . . . . $69.99 7110272 FL 1958-84. . . . . . . . . . . . . . . . . . . . . . . . . . . $69.99 7110287 Sportster® and K-models 1954-78 (turn signal holes removed) . . . . . . . . $69.99 711-408 Fits 1987-94 FXR (except FXRT-FXRP) (OEM 59542-87, 59544-87) . . . . . . . . . . $203.99 7100225 FXWG 1980-86 - 3 holes (back hole is countersunk). . . . . . . . . . $69.99 Battistinis Front Fender Brackets These billet aluminum front fender brackets relocate your stock fender when converting to a 21" front wheel. They feature a paint-saving installation and a hidden mounting design. They are CNC-machined with a chrome or black finish. Fits all Harley-Davidson® and Custom Touring models. 730-744 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . $399.99 730-745 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $399.99 Fender Mounting Hardware Kits 840-120 7110366 For part 7110272 or OEM struts. . . . . . $26.99 711-190 For part 7100225 or OEM struts. . . . . . $29.99 7110220 711-405 840-122 Raw Finish 840-123 Klock Werks Kustom Bagger Fillers for 1993-2008 Dresser® or Road King® These contoured metal panels are handcrafted to match 1993-2008 Dresser® or Road King® fenders. Color match them to eliminate tired OEM hardware. Upper filler eliminates license plate mount bracket. Lower fillers eliminate gaps between the bags and fender while highlighting contours of the fender. Made in the USA. 711-406 7110290 Fender Struts for 1986-2008 Softail® Chrome Finish Chrome replacement fender struts for 1986-2008 Softail® models. Sold in pairs without hardware. 7110290 *1986-99 FXST (OEMs 59954-86 and 59955-86) . . . . . $109.99 7110291 4-hole for 1986-99 Softail® without turn signals mounted to fender struts (OEM 59964-86, 59969-86) . . . . . . . . . . $109.99 7110220 **1986-99 FXST/FLST, smooth style . . . $96.99 7110002 2000-05 FXST Stock . . . . . . . . . . . . . . . . . . $96.99 7110001 2000-05 FLST Stock . . . . . . . . . . . . . . . . . . $96.99 711-368 ***2006-08 FXST. . . . . . . . . . . . . . . . . . . . $117.99 711-369 ***2000-05 FXST smooth style . . . . . . $117.99 *Note: Softail® struts 7110290 will bolt up to 1986-99 Softail® frames. The difference lies in the way or the position the turn signals mount. **Note: Turn signals must be relocated. ***Note: Smooth struts fit all Softail® models but turn signals must be relocated on some models. Upper Fillers For 1993-2008 FLH, FLHTR, FLHR 840-120 For models w/detachable backrest mounts, with or without trunk mounts. . . . . . . $198.99 840-122 For models w/no mounts . . . . . . . . . . . $189.99 711-405 Rigid Frame Rear Fender Brace Set This two piece style works with 9", 10" and 11" fenders when fender/frame combinations are the 2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=18http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=18Rear Fender Struts, Strut Covers, and Braces 7110346 7110220 7110347 Replacement Rear Fender Struts for 1954-99 Models in pairs. 7110288 7110345 7110323 Beautifully chromed rear fender struts, available in a smooth or stock replacement style. Sold 7110324 Stock-Style Fender Struts 7110291 4-hole for 1986-99 Softail® without turn signals mounted to fender struts (OEM 59964-86, 59969-86) . . . . . . $109.99 7110347 1958-84 FL w/o saddlebag mounting holes (OEM 59932-58, 59932-77). . . . . . . . . . . . . . . . . . . . . . . . $76.99 7110345 1954-78 Sportster® and K Models (OEM 59934-73) $83.99 7110346 1972-85 FX (OEM 59928-73, 59686-78) . . . . . . . . . . . . $79.99 710-450 Smooth Custom Fender Struts 7110220 7110288 7110323 7110324 1986-99 FXST/FLST, smooth style . . . . . $96.99 1980-86 FXWG . . . . . . . . . . . . . . . . . . . . . . . $74.99 1972-85 FX. . . . . . . . . . . . . . . . . . . . . . . . . . . $74.99 1958-84 FL . . . . . . . . . . . . . . . . . . . . . . . . . . . $74.99 7110291 Rear Fender Braces for Wide Tire Rigid Frames Hot Rod Fender Struts Here are the ‘way-cool’ fender struts to use when mounting fenders to rigid frames. Offered in raw steel, one is 111/4" long with no hole at the top so you can cut and drill as needed. The other is 9" long from center-to-center of the 2 mounting holes. Sold each. Made in the USA. 710-450 Long strut, 111/4" for custom application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $58.99 710-451 Short strut, 9" . . . . . . . . . . . . . . . . . . . . . . . . $58.99 701-370 710-241 Colony Chrome Rear Fender Strut Mounting Kits Kits include everything necessary for mounting fender struts. Made in the USA. 710-241 For mounting four-hole struts on FL Softail® 1986-99 (Replaces OEM 59969-86). . . . $71.99 710-242 For mounting six-hole struts on FX Softail® 1986-99 (Replaces OEM 59954-86). . . . $67.99 711-455 2004-08 Sportster® . . . . . . . . . . . . . . . . . . . $17.99 Top quality rear fender braces designed to fit wide tire rigid frames available to support fenders 71/2" wide, 81/2" wide and 9" wide when not using a sissy bar. Made in the USA. 701-528 Fits 71/2" fender . . . . . . . . . . . . . . . . . . . . . . $39.99 701-370 Fits 81/2" fender . . . . . . . . . . . . . . . . . . . . . . $39.99 701-529 Fit 9" fender . . . . . . . . . . . . . . . . . . . . . . . . . $46.99 Fender Strut Mounting Kit for 1986-99 Softail® Rigid Frame Fender Strut Set Billet aluminum with show-chrome finish. These fender struts fit custom rigid applications only. Will only work with narrow tire applications. 711-525 Fender struts . . . . . . . . . . . . . . . . . . . . . $139.99 Button head Allen screw kit fits 1986-99 Softail® models. Made in the USA. 710-505 Fender strut mounting kit . . . . . . . . . . . . $19.99 GOLD CLUB MEMBERS SAVE 10% EVERY DAY! Lighted Fender Skirt This subtle lighted chrome Fender Skirt is just enough to catch your eye without dominating the scene. Accented with a sliver of red LED light, it also serves as an auxiliary running and stop light. High-strength peel-and-stick adhesive makes installation a breeze. 340-670 1998-2008 Road Glide®, 2004-07 Road King® Custom, 2002-03 FLHRSE, 2004-05 FLHTCSE, & 2006-08 FLHTCUSE . . . . . . . . . . . . . . . $119.99 711-520 603-098 Chrome Fender Strut Covers for 1997-2009 Dyna® Chrome fender strut covers with signal and mount holes covers existing fender struts. 603-098 1997-2005 FXD . . . . . . . . . . . . . . . . . . . . $182.99 711-520 1997-2006 FXDWG (cover) . . . . . . . . . $169.99 711-521 2006-09 FXD . . . . . . . . . . . . . . . . . . . . . . . $203.99 711-522 2007-09 FXDWG . . . . . . . . . . . . . . . . . . . $194.99 9302009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=19http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=19Details see page 1086 Fender Ornaments and Lamps 7110284 Fifties-Style Chrome Fender Lamps These are a faithful reproduction of the original accessory front fender lamp offered from 1950-57. Updated with a chrome finish, die-cast construction, a 12-volt lamp and wiring and an amber or clear fluted lens. May be adapted to fit most fenders. 7110075 7110080 7110075 Amber (OEM 68425-80T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.99 7110080 Clear (OEM 68450-49T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99 Replacement bulb for Fender Lamps A 12-volt single-filament bulb for fender lamps and marker lights. Sold each. 7100192 Replacement bulb (OEM 68533-85T) (each) . . . . . . . . . . . . . . . . . . . . . . . . . . $.99 7110283 Indian Fender Lights Genuine Indian head fender lights, with gold or chrome headdress will mount on virtually any front fender, with drilling of two small mounting holes. Rubber mounting gasket included. 7110283 Chrome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.99 7110284 Gold and chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $69.99 3300766 Mount gasket, molded (OEM 68459-47) (each) . . . . . . . . . . . . . . . . . . . . . . $8.99 Fender Lamp with Molded Indian Head Lens For a vintage look just add this chrome version of our fender lamp with a detailed Indian head face in the white plastic lamp lens. Perfectly fits the curvature of most full front fenders used with 16" front wheels. Sold each. 7110060 Chrome housing . . . . . . $44.99 7110061 Replacement white lens $5.99 7110060 7100192 Replacement bulb (OEM 68533-85T) . . . . . . . . $.99 Küryakyn™ Wild Boar Fender Ornament Snotty, untamed with raging red eyes, this bad guy makes a real statement about your ride. Two-piece construction allows easy installation and bulb replacement. Compatible with any 12-volt power source. Universal fitment. 710-210 Wild Boar fender ornament . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.99 ZZ33273 Replacement bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.99 7110065 7110275 7110066 Eagle Head Fender Ornaments Absolutely the finishing touch for your custom bike. These chrome-plated diecast ornaments will fit just about any front fender after you drill the two mounting holes. They’re 61/2" long and come complete with thick rubber mounting gaskets and the necessary hardware. 7110066 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99 7110275 Chrome with Gold Accents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $36.99 7110065 Chrome with Gold Accents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99 Skull Head Front Fender Ornaments These unique skull head fender ornaments are all chrome. They fit most fenders. Choose all chrome or chrome with illuminated eyes. 7100201 Skull head, Chrome. $33.99 7100185 Skull head with illuminated eyes, Chrome. . . . . . . $33.99 711-217 Replacement bulb w/wires for 7100185. . . . . . . . . $2.99 7100201 Küryakyn™ Eagle Fender Ornament with Amber Lighted Eyes ZZ71254 This bird is the word! Your front fender will take on new life with Küryakyn's™ majestically sculpted chrome and gold eagle with amber lighted eyes. One screw and the top comes off for easy bulb replacement. Universal fitment for 12V systems. ZZ71254 Eagle fender ornament . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $45.99 ZZ33273 Replacement bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.99 Fender Lights for 1936-99 Big Twin Before After Rear Fender Hing2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=20http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=20Fender Lamps and Strut Lights Fender Marker Light Assemblies and Blue Dot Lenses for 1980-93 FLH/T and 1986-95 FLST/FLSTC These marker light assemblies and lenses which have been used since 1980 on the front and rear fenders of many models, are now available for replacement purposes. We also have Blue Dot lenses available for these light assemblies. Sold each. 3300455 3300335 3300290 3300470 Lens Only 7110273 3300330 Complete Assemblies 3300455 Front with Amber lens (OEM 59082-79) . . . . . . . . . . . . . . . . . . . . . $16.99 3300335 Rear with Red lens (OEM 59658-79). . . $17.99 Rear Lenses 3300470 *Red lens with Blue Dot . . . . . . . . . . . . . . . $6.99 3300330 Stock replacement Red lens (OEM 68046-79) . . . . . . . . . . . . . . . . . . . . . . . $3.99 711-267 Amber lens . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.99 320-230 Front Lenses 7110273 *Amber lens with Blue Dot . . . . . . . . . . . $14.99 3300290 Stock replacement Amber lens (OEM 59180-80) . . . . . . . . . . . . . . . . . . . . . . . $2.99 *Note: Installation of these accessories maybe in violation of FMVSS standard #108. 340-131 340-131 320-231 330-279 320-392 Adjure LED Fender Lights These LED lights pop right into OEM sockets for extremely quick installation. No need for load equalizer. Just plug and ride! Sold each. 320-230 Red LED Fender Light . . . . . . . . . . . . . . . . $51.99 320-231 Amber LED Fender Lights . . . . . . . . . . . . $51.99 711-181 Front and Rear Fender Tip LED Conversion Kit for 1996-2009 FLH and FL Softail® 320-391 331-143 331-143 Give your Dresser® or Heritage® a brighter outlook. Their fender tip light kits feature the new Super Brite LEDs. Each kit includes a circuit board that is fitted with the brightest LEDs available. The rear fender tip light has both a running light and brake light; the front fender tip light is just a running light. The light kits plug into the OEM connector, they reuse the factory lens and lens mount. Each light kit comes with complete instructions and mounting hardware. Made in the USA. Fits 1996-2009 FL Softail® and FLH models equipped with a factory fender tip lights (front and rear) 331-142 320-391 Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $109.99 320-392 Rear, features running and brake lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $116.99 711-180 331-142 7100205 Auto-Gem Derringer Lights for 1984-2009 Softail® The Derringer Light from Auto-Gem is made exclusively for 1984-2009 HarleyDavidson® Softail®. The lights mount in pairs on the end of the fender strut to increase visibility and provide the nostalgic look riders are looking for. The standard Derringer uses the red or amber Auto-Gem glass lighted jewel as the light source. The LED Derringer uses Auto-Gem LED power Jewel. Sold in pairs. Made in the USA. 331-144 No Magic LED Fender Tips These are the brightest LED inserts available today! 100% satisfaction with the Genesis LED products plug-and-play - no cutting, no splicing. Uses existing lens and bucket with easy-to-install connections. 40 wide angle super-bright next generation Genesis LEDs. These fender tips will fit the fenders on all Touring (FLH) and Heritage Softail®. Amazing Genesis LED brightness guarantee with a lifetime warranty. Fender Tip with Light for 1980-95 Models Fender tip with clear marker light is a perfect fit on both OEM and many aftermarket rear fenders. It's designed to fit 1980-95 FLH/T models (except FLTR) and 1986-95 FLSTC/N models. Because of the clear lens, it ships with a red bulb for rear use (never use red on the front!). Sold each. 7100205 Clear fender tip light with bulb . . . . . . . $18.99 Standard Derringer Marker Lights 711-181 Red lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $67.99 711-180 Amber lens . . . . . . . . . . . . . . . . . . . . . . . . . . $67.99 970-394 Bulb (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99 Fender Tips 331-142 Amber. . 2009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=21http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=21Fender Accessories and Hardware Fender Mount Clamps for Springers® Chrome fender mount clamps. These 3/4" ID custom clamps allow use of OEM 1988-92 Springer® front fender 710-117 on custom Springer® front ends. 711-440 Chrome fender clamps . . . . . . . . . . . . . . . $98.99 710-082 Fender-to-Fork Adapters Designed to adapt an FLSTF front fender to any 711-096 1980-2008 FLT, FLHT style fork using a 16" wheel. Adapters are available in chrome or raw finish. Works with reproduction FLSTF fender 7100261 (shown on page 917). Can 711-097 also be used in many custom applications. Adapters measure 311/16" long x 111/16" wide x 3/4" thick. Top holes are 5/16" with 23/4" centers, bottom holes are also 5/16" with 3" centers. Sold in pairs. 711-096 Chrome fender adapters . . . . . . . . . . . . . $78.99 711-097 Raw fender adapters . . . . . . . . . . . . . . . . . $68.99 Chrome Fender Spacers Billet aluminum fender spacers allow the mounting of a narrow glide fender to a mid glide or Wide Glide® front end. Available in different thicknesses for 35/39mm and 41mm front ends. Spacers accept 5/16" bolts with 23/4" hole centers. Mid glide spacers measure .695" thick and Wide Glide® spacers measure 11/4" thick. Sold in pairs. Made in the USA. 710-080 35/39mm Mid glide (.695"). . . . . . . . . . $109.99 710-081 35/39mm Wide Glide® (1.25") . . . . . . . $109.99 710-082 41mm Mid glide (.695") . . . . . . . . . . . . . $119.99 710-084 41mm Wide Glide® (1.25"). . . . . . . . . . . $119.99 Fender Slam Kit for 1980-2009 FLT, FLHS, FLHR, FLHX, FLHT The fender slam bracket will lower your touring fender for a snug fit over the front tire when running a 16" or 18" front tire. The kit comes with instructions and all hardware to install on your fender. It will give the outside of your fender the stock appearance of rivet heads with stainless steel carriage bolts that can be touched up the same color as your bike. No welding required. Made in the USA. 710-745 Fender slam kit . . . . . . . . . . . . . . . . . . . . $71.99 Inner Fender Accent for 2000-09 Softail® Affordable, easy, and wow what a difference! This chrome-plated stamped steel insert covers up your plain black plastic inner fender/splash guard. Just stick it on with double-sided tape and go! 711-465 2000-06 Softail® (except 2004 FXSTDSE, 2006 FXST, FXSTS, FXSTB, and FLSTFSE) (set). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $103.99 711-546 2007 Deuce™, Deluxe, Heritage & Springer® Classic (each) . . . . . . . . . . . . $59.99 711-547 All 2008-09 Softail® models (except 2008-09 Rocker™/C) (set) . . $119.99 Custom Fender Mounting Kit for 1984-99 Softail® This kit replaces the stock mounting hardware on 1984-99 FXST. Provides a clean, custom look. Kit includes 6 each chrome die-cast bolt covers, socket head bolts, washers and lock nuts. 7110240 Softail® Fender Mount Kit . . . . . . . . . . . . $39.99 Front Fender Mounting Kit 710-510 711-536 711-537 FBI 18" and 16" Fender Adaptors for 1980-2009 FLT You can now install an 18" fender or 16" fender on your 1980-2009 bagger. FBI designed billet aluminum pieces with a high chrome finish giving that front fender a show-quality look. Made in the USA. 710-680 Adapter for 16" and 18" wheels . . . . . $245.99 Correctly reproduced lock tabs, (OEM 7041), and bolts used to mount front fender on 1951-78 FL and FLH. Made in the USA. 710-510 Parkerized . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99 710-511 Cadmium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99 710-512 Chrome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99 711-540 Accutronix Fender Spacers CNC-machined 6061-6T billet aluminum and chromed to perfection, these 41mm fender spacers are designed for use with a custom front fender. Sold in pairs. Made in the USA. 711-536 Chrome 41mm, 11/4" thick. . . . . . . . . . $89.99 711-537 Chrome 41mm, 1" thick. . . . . . . . . . . $113.99 711-538 Chrome 41mm, 3/4" thick. . . . . . . . . . $113.92009-06-16T23:24:54+02:00http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=22http://ipaperus.ipaperus.com/JPCycles/2009HarleyUpdate/Fenders/?Page=22Front and Rear Fender Mount Kits and Hardware 230-314 711-087 Universal Fender Clamp 7100070 Universal fender clamp (each) . . . . . . . . . $5.99 Style Glide Custom Fender Spacers These chrome spacers are used for mounting custom narrow fenders. Made in the USA. 230-313 3/8", fits 1973-2009 FXST, FLST, FXDWG legs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $54.99 711-087 1/2", fits 1973-2009 FXST, FLST, FXDWG legs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $54.99 230-314 3/4", fits 1980-2009 FLT, FLHT legs . . . . . $54.99 711-190 Chrome Fender Strut Bolt Kits for 1957-2009 Big Twins Available for most 1957-2009 Big Twin and Sportster® models. These kits include the necessary Allen head bolts, washers and nuts for fender mounting. Made in the USA. FXST 1986-99 . . . . . . . . . . . . . . . . . . . . . . . . $28.99 FXST 2000-09 . . . . . . . . . . . . . . . . . . . . . . . . $58.99 For part 7100225 or OEM struts. . . . . . $29.99 FX 1973-85 . . . . . . . . . . . . . . . . . . . . . . . . . . $14.99 FL 1958-84 (without saddlebags or luggage rack) . . . . . . . . . . . . . . . . . . . . $17.99 711-191 XL 1957-78 . . . . . . . . . . . . . . . . . . . . . . . . . . $23.99 711-194 710-063 711-190 711-193 711-192 710-103 Front Fender Mount Kit for 1936-93 Big Twin Attaches fender to original style assembly. 710-191 710-041 710-189 710-060 Made in the USA. 1936-48 Spring fork, cadmium. . . . . . . . $19.99 1936-48 Spring fork, parkerized . . . . . . $19.99 1936-48 Spring fork, chrome . . . . . . . . . $21.99 1936-48 Locks only, cadmium . . . . . . . . $19.99 Reinforced Rubber Fender/Oil Tank Washers 1" diameter round rubber washers have dozens of uses, in addition to the obvious. Allows clean scratch-free, well-cushioned installations. 7100240 Fender/Oil Tank washers (10-pk) . . . . . . $5.99 Imported 710-025 1973-84 FX-XL, Chrome with acorn nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29.99 710-103 1986-99 FLST, Chrome . . . . . . . . . . . . . . . $16.99 710-101 1980-93 FXWG-FXST, chrome. . . . . . . . . $14.99 710-104 1994-99 FXST, Chrome with acorn nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.99 710-102 1949-84 FLH, zinc . . . . . . . . . . . . . . . . . . . . $21.99 710-098 1975-84 FL lock tabs, zinc (each). . . . . . . $4.99 710-385 Rear Bumper Eliminator for 1980-2009 FLT/FLHT Rear bumper eliminator helps to get rid of that ugly OEM bumper and rail and replace it with this show-chrome support. Easy to install and cleans up the rear fender area on 1980-2009 FLT and FLHT models. Made in the USA. 601-905 1980-2009 FLT/FLHT bumper eliminator . . . . . . . . . . . . . . . . . $139.99 710-386 Fender Bracket for 1954-78 Sportster® and K-Models This chrome bracket, complete with foam buffer, mounts to the frame tubes and stabilizes the rear fender. By reducing vibration, the bracket helps prevent fender cracks on 1954-78 Sportster® and KModels. (Replaces OEM 59795-52A). 7110195 Fender bracket . . . . . . . . . . . . . . . . . . . . . . $19.99 Chrome Allen Head Screw Kit for 1974-84 FX and Sportster® Front Fenders Great for replacing lost or loose fender rivets. This 24-piece set mounts the front fender brackets to the fender and the fork legs. Features all chrome-plated buttonhead Allen screws, acorn nuts and lock washers. Fits 1974-84 XL and FX front fenders and forks and other custom applications using 5/16"-18 fork leg threads. Made in the USA. 711-178 Chrome allen head screw kit . . . . . . . . . $29.99 Colony Fender Mount Kits for 2004-09 Sportster® Colony fender mount kits fit front and rear fenders on 2004-09 Sportster®. The front fender mount kits have knurled Allen head bolts. The rear fender mount kit has buttonhead bolts. Each kit is flawlessly chromed and will add a touch of detail to any bike. Made in the USA. 710-385 Allen front fender kit . . . . . . . . . . . . . . . . . . $8.99 2009-06-16T23:24:54+02:00