http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/RSS.ashxJP Cycles PagesTue, 09 Jun 2009 17:36:26 +0200http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=1http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=1Fork Assemblies 230-351 230-395 FXST Style Single Disc Fork/Wheel and Caliper Assemblies for 1948-2009 Models Assemblies fit Big Twin FX and FL models. They are available with polished or chrome lower legs without reflector boss to accept a left side single-disc caliper and 111/2" rotor, hard-chrome fork tubes with internals assembled, axle, neck bearings, top cone and stem nut, pinch bolts, and bearing dust covers are included. Stock length is 31" overall. Kit also includes a 21" all-chrome assembled wheel with bearings, drilled 111/2" rotor with chrome screws and choice of black or chrome style disc caliper complete with mount hardware and pads. Note: 230-348 can be used on 2000-09 Softail® (except Rocker™) if entire assembly is used, along with a custom brake line. 230-348 1948-99 Big Twin kit with chrome caliper and chrome lower sliders, (except FLT, FLHT, FLHS, FLHR, Dyna® or FXR) . . . . . . . . . . . . $1428.99 230-349 1982-94 FXR kit with chrome caliper and chrome lower sliders . . . . . . . . . . . . . . . $1556.99 230-347 1982-94 FXR kit with chrome caliper . . . . $1427.99 230-345 1982-2003 Sportster® chrome caliper and sliders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1669.99 230-404 1952-81 Sportster® kit with chrome caliper . $1669.99 Single Disc Fork Assembly for 1948-99 FXST, FLH, FXDWG, Sportster® and FXR Features chrome trees, polished or chromed lower slider legs, to accept 111/2" caliper and rotor, hard-chrome fork tubes, axle, neck bearings, top cone and stem nut, pinch bolts and bearing dust covers. Fork is 31" overall length and legs are assembled. Single-disc unit accepts 111/2" rotor and left side caliper 241-005 and wheel 201-050, 201-051 or 201-052, which must be ordered separately. 230-391 1948-99 FLH, FXE, FXWG and FXST single, complete . . . . . . . . . $789.99 230-395 1948-99 FLH, FXE, FXWG and FXST single, complete with chrome lower silders. . . . . $914.99 230-392 1982-94 FXR, 41mm front ends complete . . . . . $859.99 230-393 1991-99 FXD, 41mm front ends complete with chrome lower sliders. . . . . $985.99 230-396 1991-99 FXD, 41mm front ends complete . . . . . $849.99 230-394 1991-99 FXD, 41mm front ends complete with chrome lower sliders. . . . . $985.99 230-398 1952-81 XL, 41mm front ends complete . . . . . $899.99 230-399 1952-81 XL, 41mm front ends complete with chrome lower sliders. . . . . $996.99 230-519 Fits 1984-99 FXST right and left leg assembly only, single-disc (OEM 46004-91) . . . . . . . . . $589.99 230-518 Fits 1984-99 FXST, right and left leg assembly only with chrome sliders, single-disc (OEM 46004-91) . . . . . . . . . . . . . . . . . . . . . . . . . $649.99 FXST Style Dual Disc Fork/Wheel and Caliper Assemblies for 1948-2009 Models Assemblies are available with polished or chrome lower sliders with hard-chrome fork tubes and internals installed without reflector boss to accept dual-disc calipers and 10" rotor, chrome tees, neck bearings, axle spacer and top nut. Stock length is 31" overall. Kit also includes a 21" all-chrome assembled wheel with bearings, drilled 10" steel rotors with chrome screws and chrome dual-disc calipers complete with pads. Note: 230-274, 230-351 can be used on 2000-09 Softail® models if entire assembly is used with a custom brake line. 230-274 Big Twin kit with chrome calipers, polished sliders. Fits 1948-99 FL, FX, FXST and FXWG, (except FLT, FLHT, FLHS, FLHR, Dyna®, FXR or Rocker™)$1456.99 230-351 1948-99 Big Twin Kit with chrome calipers and chrome lower sliders, (except FLT, FLHT, FLHS, FLHR, Dyna® or FXR). . . . . . . . . . $1709.99 230-352 1982-94 FXR kit with chrome calipers and chrome lower sliders . . . . . . . . . . . . . . . . . . . $1556.99 230-355 1982-94 FXR kit with chrome calipers. . . . . . . $1427.99 230-350 1952-81 Sportster® kit with chrome calipers $1711.99 230-344 1982-2003 Sportster® chrome calipers and sliders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1699.99 7052009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=2http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=2Fork Assemblies, Accessories and Tools Complete Fork Assemblies for 1949-E77 FL Models We offer all three styles of 1949-E77 FL front ends (left drum, right drum and disc). They come complete with late-model chrome triple trees, chrome fork slider covers, two stocklength hard-chromed fork tube assemblies, polished aluminum fork slider set, bearing jam nut, chrome acorn stem nut, stem nut lock washer, bearings and dust covers. The fork leg sets included in these kits come with all bushings and seals installed and ready for use. Fork seals have been updated to the late-style doublelipped seals and the leak-prone drain plugs in the FL kits have been totally eliminated. Triple tree set is styled like the 1960-84 stock components with kits developed for the following applications. 2300310 1949-68 FL (left drum brake) . . . $699.99 2300315 1969-71 FL (right drum brake). . $699.99 2300320 1972-E77 FL (single-disc brake) . . $699.99 Details see Page 1086 Dual-Disc Fork Assembly for 1980-83 Wide Glide® Our complete dual-disc fork assembly comes complete with chrome upper and lower triple trees, hard-chromed fork tubes, spring and all internal components. Available with your choice of chrome or polished aluminum lower legs, these forks are a direct replacement for 1980-83 FXWG and can be fitted to any 1949-84 4speed Big Twin when 1977-83 OEM or 2400756 dual-disc calipers and 10" rotors are used. The chrome triple trees feature late 31/2" riser spacing, Softail® style central headlight mounting hole and an identical 3" rake angle as the factory originals. 2300320 2300450 Stock Length FL (31/2" Under FXWG 1980-83) 230-308 Polished lower legs . . $669.99 Stock Length FXWG 1980-83 2300450 Polished lower legs . . $669.99 2300145 Chrome lower legs. . . $699.99 2" Over Stock Length FXWG 1980-83 2300332 Polished lower legs . . $599.99 2300331 Chrome lower legs. . . $699.99 Installation Kit 230-360 Installation kit. . . . . . . . . $39.99 Polished Pro-Klip 231-425 570-136 Machined from 6061-T6 billet aluminum then show polished. Snaps easily onto any 41 mm Fork Tube and accepts up to a 5/16" line. Sold each. 760-460 Pro-Klip . . . . . . $27.99 570-136 Chrome Billet Fork Tube Gauge Bracket 41mm Complete Front Fork Kit for 1949-99 Big Twin Fits 1949-86 4-Speed Big Twin, 1984-99 Softail®, 1993-99 FXDWG and custom applications. The lower legs Universal Fork Flames for 1949-2009 41mm Forks These are beautifully cut by a precision CNC waterjet machine, then chrome-plated. They are extremely durable and will keep their mirror finish even after being blasted by gravel and sand from the road. These will completely transform the front end of your bike. Covers the lower fork leg, the ugly axle bolt and other miscellaneous hardware, and the brake calipers. Installation is simple using the supplied universal fork clamps and hose clamps. Includes all necessary mounting hardware including rubber to protect your forks. Fits 41mm front forks for 1949-2009 (except inverted fork assemblies). ZZ22107 Universal for non-inverted forks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $303.99 Permits quick and easy installation of mini 48mm gauges to exposed 39mm or 41mm fork tubes. Gauges are sold separately. 570-135 39 mm forks . . . . . . . . . . $44.99 570-136 41 mm forks . . . . . . . . . . $44.99 are machined from billet aluminum and feature screw-on dust covers, flush mount axle with hidden hardware and removable brake and fender mounts. The 41mm fork tubes measure 241/2" long, and they are hard-chrome plated with the stock length. Front end measures 31" from the top stem bearing to the centerline of the axle. 231-425 Complete front end 41mm . . . . . . . . . . . . . . . . . . . . . $999.99 49mm Fork Clamp for 2006-09 Dyna® Tired of your clutch cable blowing in the wind or being attached with a unsightly zip tie? We now have the billet chrome clamps to solve this problem. For 2006-09 Dyna® with 49mm clamps. 231-500 Fork clamp 49mm . . $32009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=3http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=3Front End and Fork Assemblies FLST Style Fat Kid Style 231-235 231-240 FLST Style Complete Front End Assembly for 1948-99 Big Twin Includes the complete fork kit, with the addition of the 5-piece chrome fork cover set, 7" headlamp and bracket, 16" chrome wheel, speedometer drive, chrome caliper, 111/2" drilled disc and Fat Kid style or FLST style fender. Fits 1948-86 4-speed Big Twin and 1984-99 Softail®. 1948-99 Fat Kid Style 230-358 Kit with chrome lower sliders and chrome caliper. . . . . . . . . . $1711.99 1948-99 FLST Style 230-356 Kit with chrome lower sliders and chrome caliper. . . . . . . . . . $1769.99 58mm Inverted Front End Assembly for 1984-99 Models Milwaukee Twins™ inverted Fork Assemblies feature massive 58mm chrome plated upper tubes and triple trees made from 6061-T6 aluminum, bullet shaped lowers with a completely hidden axle design, and exceptional dampening ability for a superior functioning product. The kit includes forks and triple tree assembly, axle kit with spacers, stem nut, and fork lock bracket. These inverted forks were designed to use 1984-99 FXST style wheels assemblies with a single-disc. Optional dual-disc hardware is sold separately. Standard length is OEM FXST length. These inverted front end assemblies come with fork fluid already added. Fork stops sold separately. Chrome Front End and Slider Kits for 2000-07 Deuce™ Here’s a Deuce™ front end kit that offers a conventional look with superior performance, providing a smoother, more controlled ride. Features chrome triple trees and 41mm fork tubes and sliders. Requires the use of Deuce™ front or custom fender and late-model front wheel and brake caliper. Whether you are buying the complete kit or the fork sliders by themselves, you will need the axle kit 220-113 (sold separately) for installation. Fits 2000-07 Deuce™. 230-685 Deuce™ Front End 230-685 Stock length complete kit . . . . . . . . $899.99 Note: These triple trees incorporate a raked design that will alter rake and trail. This can adversely affect handling characteristics of the vehicle they are installed on. Careful consideration is required to determine the application’s suitability for 5° raked trees only. Cannot be installed on a stock rake frame. Frame neck must be raked to maintain a safe trail angle. Slider Kits Only 230-686 Stock length sliders. . . . . . . . . . . . . . . $499.99 230-687 2" over stock sliders . . . . . . . . . . . . . . $499.99 230-688 2" under stock sliders. . . . . . . . . . . . . $514.99 0 degree Rake Tree 231-235 Standard length . . . . . . . . . . . . . $829.99 231-236 +2" Length . $847.99 231-237 +4" Length . $865.99 231-238 +6" Length . $882.99 231-239 +8" Length . $899.99 231-240 +10" Length $918.99 231-241 +12" Length $935.99 5 degree Rake Tree For use with raked frame only. 231-242 Standard Length . . . . . . . . . . . . . $847.99 231-243 +2" Length . $865.99 231-244 +4" Length . $882.99 231-245 +6" Length . $899.99 231-246 +8" Length . $918.99 231-247 +10" Length $935.99 231-248 +12" Length $953.99 Front Axle Kit 220-113 For Deuce™ models equipped with 41mm forks 2000-07 . . . . . . . . . . $49.99 Bracket 220-113 700-370 Dual disc bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $64.99 7072009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=4http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=4Fork Assemblies 41mm Glide® Front End Assemblies for 1952-2003 Sportster® Feature wide-style chromed triple trees; polished or chrome lower sliders, hard-chrome fork tubes, axle, neck bearings, top cone and stem nut, pinch bolts, and bearing dust covers. Fork is 31" overall length. Single-disc units accept 111/2" rotors, dual-disc type uses two 10" rotors. All units require Big Twin Wide Glide® front wheels. Complete kits include 21" wheel, chrome caliper(s), drilled disc rotor(s), and rotor bolts. Single-disc units accept 5200312 speedo drive, dual-disc models accept a 560-004 speedo drive. Note: 1952-78 models need 230-694 neck cups. Units do not include provision for fork locks. Details see Page 1086 230-399 1952-81 Sportster® Complete Fork and Wheel Kits 230-404 1952-81 Sportster® kit with chrome caliper . . . . . . . . . . . . . . . . . . . . . $1669.99 230-350 10" Dual-disc, chrome slider. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1711.99 1952-81 Sportster® Fork Assemblies only, does not include wheel or brake parts 230-398 230-399 230-400 230-401 111/2" Single-disc, polished slider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $899.99 111/2" Single-disc, chrome slider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $996.99 10" Dual-disc, polished slider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $899.99 10" Dual-disc, chrome slider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $996.99 1982-2003 Sportster® Complete Fork and Wheel kits 230-345 1982-2003 Sportster® chrome caliper and sliders . . . . . . . . . . . . . . . $1669.99 230-344 10" Dual-disc, chrome slider. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1699.99 1982-99 Sportster® Fork Assemblies only, does not include wheel or brake parts 230-637 230-402 230-638 230-403 111/2" Single-disc, polished silder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $899.99 111/2" Single-disc, chrome slider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $996.99 10" Dual-disc, polished slider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $899.99 10" Dual-disc, chrome slider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $996.99 231-076 Inverted Front Ends New inverted front end from Milwaukee Twins™ is the most affordable and best quality that you will find in the motorcycle industry. With a brilliant chrome finish these come completely assembled and ready to install when it arrives at your front door. These front ends provide you performance with the inverted fork technology that has been proven on race track testing. Fits all frames designed or built around a 84-99 Softail©. These triple trees incorporate a raked design that will alter rake and trail. This can adversely affect handling characteristics of the vehicle they are installed on. Careful consideration is required to determine the application’s suitability. For 6° raked trees only. Cannot be installed on a stock rake frame. Frame neck must be raked to maintain a safe trail angle. 231-375 231-376 231-377 231-378 231-379 231-380 231-381 231-382 231-383 231-384 231-385 231-386 231-387 231-388 231-389 231-390 231-391 Stock, 0° rake . . . . . . . . . . . . . . . . . $999.99 Stock, 3° rake . . . . . . . . . . . . . . . . . $999.99 Stock, 6° rake . . . . . . . . . . . . . . . . . $999.99 2" over, 0° rake . . . . . . . . . . . . . . . . $999.99 2" over, 3° rake . . . . . . . . . . . . . . . . $999.99 2" over, 6° rake . . . . . . . . . . . . . . . . $999.99 4" over, 0° rake . . . . . . . . . . . . . . . . $999.99 4" over, 3° rake . . . . . . . . . . . . . . . . $999.99 4" over, 6° rake . . . . . . . . . . . . . . . . $999.99 6" over, 0° rake . . . . . . . . . . . . . . . . $999.99 6" over, 3° rake . . . . . . . . . . . . . . . . $999.99 6" over, 6° rake . . . . . . . . . . . . . . . . $999.99 8" o2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=5http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=5Leaf Spring Fork Assembly by Kiwi Motorcycle Co. This l e a f spring fork assembly is reminiscent of those used on early Indians and looks totally ‘outta sight’ on retro builds. The fork assembly features a 1" neck that fits most stock HD® frames, aftermarket frames, as well as vintage Indian motorcycles., and accepts 16" to 21" wheels. Made from 1020 DOM tube for strength, and brake anchor tabs can be welded onto the forks for left, right, or dual disc applications as desired. Available in stock HD® length from the top of the lower triple tree where the bearing seats against, to the center hole that the rocker pivots on as well as a 2" under version. Fork assembly comes complete with top triple tree for use with standard risers and handlebars. Fork assembly comes raw and can be powder-coated or chrome-plated to match the look of your bike. Uses 3/4" axle and has no brake mounts. Made in the USA. 702-197 Stock length 21" . . . . . . . . . . . . . . . . . . $2694.99 702-198 2" under, 19" . . . . . . . . . . . . . . . . . . . . . . $2694.99 Smooth Style Custom Forks Lower Fork Leg Sets Ball-Milled Style Torpedo Style Lower Fork Leg Sets Smooth Style ‘Big-Un’ Front Fork Kit for Custom Use Includes detailed instructions. Stock lengths measure 31" from top bearing to axle (same as FXST). The hardware is hidden throughout. With this high-quality assembly, you’ll have that high-dollar inverted fork look without the high dollar inverted fork price. Other features include: hard-chrome fork tubes, top mount internal fork stop/bearing race. Billet aluminum construction, detailed instructions, and spanner wrench. Fits 1949-99 Big Twin (except FLT), 1982-99 Sportster® and most custom frames. Fork oil is required (11.2 oz. per leg, shipped dry). Use with 1984-99 111/2" brake disc and calipers and 1984-99 Wide Glide® wheel hub or equivalent. These are shipped unassembled and must be assembled and installed by a qualified mechanic. 230-312 Stock length (31"), single-disc. . . . . . . $1356.99 230-986 +4" over stock, dual-disc . . . . . . . . . . . . $1299.99 230-987 +6" over stock, dual-disc . . . . . . . . . . . . $1299.99 230-428 230-428 FXST Style Wide Glide® Fork Assembly for 1984-99 Models These fork assemblies feature the Milwaukee Twins™ chrome-plated triple trees and complete ® Softail style fork slider with your choice of either smooth or ball-milled, chrome-plated billet lower legs. Each assembly comes completely assembled and includes chrome-plated stem nut and axle. These are 1984-99 FXST-style tube assemblies (241/2" stock length) with convertible style legs for either single or dual-disc brakes. The axle and hardware are a flush mount style and there are billet block-off plates that hide the damper screw holes. 230-428 Fork Assembly with smooth lower legs $899.99 230-429 Fork Assembly with milled lower legs . . $908.99 Custom Fork Kits and Lower Leg Sets for 1984-99 41mm Forks Mid-USA’s 41mm chrome fork tube and slider kits for 1984-99 Big Twins are now available in the hot new ‘Torpedo’ style, with additional lengths for the ball-milled and smooth styles. Lower legs are machined from billet aluminum and feature screwon dust covers, flush mount axles with hidden hardware, and removable brake and fender mounts. Fork tubes are hard-chrome plated for years of dependable service. The removable brake mounts are designed for 1984-99 OEM or similar brake calipers and 111/2" OD brake discs. Kits fit 1984-99 FXST, 1985-86 FXWG and 1993-99 FXDWG. Stock length is 311/2". For complete listing visit ® WWW.JPCYCLES.COM. Note: Fork kits are shipped without fork oil. Use the oil weight of your choice and add 11.2 oz per leg. Fork length is measured from the top of the fork to the center of the axle. Leg sets which are 4" over, or longer, come disassembled, bushing and seals are included but not installed. 200-710 Wheel Conversion Kit by Custom Cycle Engineering Contains everything needed to adapt narrow glide wheels to Wide Glide® forks. Includ2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=6http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=6Springer Fork Assemblies Wide Style Springer® Assembly for 1949-2009 Big Twins This custom Springer® assembly is an economical alternative to a shock-dampened type Springer®. Comes fully assembled with an in-line top bracket and no built-in rake. The standard length Springer® (31" measured from the top bearing to the axle) is comparable to the standard length FXST front end. 1" OD steering stem designed for Timken® type bearings. Both rear legs are threaded for right or left brake mounting. Assembly includes a 3/4" axle kit that includes a brake mount pivot with thrust, washers, speedometer drive adapter and hub spacers. Measures 91/4" between rockers. Riser mounts are on 43/4" centers and threaded 1/ 2"-20. Requires 1984-99 wheel (compatible with 3/4" OD axle). Does not come with fender mounts. Details see page 1086 Custom Wide Springer® Front Forks and Axle Kits Classic Springer® looks with quality second to none. Wide Springer® without shock features mounting points for dual-disc brakes; and no front fender mounting points. Wide Springer® with shock uses a front fender mount similar to the 1988-92 FXSTS. The distance between the rear legs is 85/16"; outside width is 91/2". Forks come assembled and include fork neck, top nut, crown nut, riser style top clamp, and inner springs. Both versions use standard 1" neck bearings. Fits all 1936-99 Big Twins (except FLT) and all 1982-99 XL. Requires the use of the Paughco axle, available separately. Recommended for 21" wheels only. Made in the USA. Note: Overall length is measured from the top of the top clamp to the center of the rear leg pivot. 25" stock length forks are the same length as OEM forks used on 1948-84 FLH Big Twins. The correct length for the equivalent of a FXSTS Springer® fork would be +3" over stock (28" total) length. 230-540 Chrome 231-195 700-242 231-199 231-201 231-203 231-205 231-207 231-209 231-211 231-213 231-215 501-957 (-2) 29" . . . . . . . $749.99 (Std.) 31" . . . . . $749.99 (+2") 33". . . . . . $749.99 (+4") 35". . . . . . $749.99 (+6") 37". . . . . . $749.99 (+8") 39". . . . . . $799.99 (+10") 41" . . . . $799.99 (+12") 43" . . . . $799.99 (+14") 45" . . . . $819.99 (+16") 47" . . . . $849.99 (+18") 49" . . . . $849.99 Riser stud . . . . . . . $8.99 Wide Springer® without Shock Black 231-196 700-241 231-200 231-202 231-204 231-206 230-701 (-2) 29" . . . . . . . . . . . . . . $749.99 (Std.) 31". . . . . . . . . . . . . $749.99 (+2") 33" . . . . . . . . . . . . . $749.99 (+4") 35" . . . . . . . . . . . . . $749.99 (+6") 37" . . . . . . . . . . . . . $749.99 (+8") 39" . . . . . . . . . . . . . $759.99 231-208 231-210 231-212 231-214 231-216 (+10") 41". . . . . . . . . . . . $799.99 (+12") 43". . . . . . . . . . . . $799.99 (+14") 45". . . . . . . . . . . . $819.99 (+16") 47". . . . . . . . . . . . $849.99 (+18") 49". . . . . . . . . . . . $849.99 230-537 Standard; 27" L . . . . . . . . $1299.99 230-535 +3" over stock; 30" L . . . $1299.99 230-536 +6" over stock; 33" L . . . $1299.99 230-537 Wide Springer® with Shock 230-540 Standard; 27" L . . . . . . . . $1499.99 230-538 +3" over stock; 30" L . . . $1499.99 230-539 +6" over stock; 33" L . . . $1499.99 Axle Kits for Wide Springer® with Shock For use with 230-540, 230-538 and 230-539. 230-464 3/4" axle kit; OEM brake . . . $96.99 230-465 3/4" axle kit; PM brake . . . . . $96.99 Narrow Springer® Front End for 1949-2009 Big Twin and Sportster® by Paughco Narrow Springer with 1" fork stem for 1949-2009 Big Twin and 1982-2003 Sportster®. Springer® measures 61/4" outside, and is set-up with a glide style top clamp and brake caliper mounting tabs. Comes assembled and includes fork neck, top nut, crown nut, top clamp, and inner springs. Axle and axle hardware purchased separately, see below. Measurements noted with each front end are from the center of the rear rocker hole to the bottom of the top clamp. Made in the USA. ® Redneck Springer® Front Fork Assembly The Redneck Springer® front fork assembly is engineer2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=7http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=7Springer Fork Assemblies 230-566 Complete Rocker Rebuild Kit for 1997-2007 FLSTS, 1988-2006 FXSTS and 2009 FLSTSB Includes all components needed to mount rockers. Decorative chrome-plated. Made in the USA. 220-262 1997-2007 FLSTS, 2009 FLSTSB . . . . . . $119.99 220-263 1988-2006 FXSTS . . . . . . . . . . . . . . . . . . . $119.99 230-479 Springer® Fork Lowering Kit Quick and easy way to lower front forks 11/2" for a custom look. Includes chrome compression springs, spring spacers and bushings. Requires 230-479 spring compressor tool to install. Made in the USA. Note: Will not work with FLSTS. Careful evaluation of fender-to-frame clearance required when installing any lowering kit. 230-566 1989-2007 and 2009 FLSTSB OEM Springer® or aftermarket Springer® . . . . . . . . . . . . $149.99 230-479 Compressor tool . . . . . . . . . . . . . . . . . . . . . $39.99 Progressive Suspension® Springer® Shock for Late 1988-2007 and 2009 FLSTSB Models A night and day difference in ride and handling control. The Progressive® Suspension engineers have designed the perfect solution for the handling problems associated with stock Springer® shocks. Just because it’s called a Springer® does not mean it has to feel bouncy. 383-204 L1988-2007 Springer® and 2009 FLSTSB . . . . . . . . . . . . . . . . . . . $169.99 230-508 Works Performance Front Shock for 1988-2007 and 2009 FLSTSB Springer Softail® This shock is nitrogen filled and is designed to help stabilize the ride and control on all 1988-2007 and 2009 FLSTSB models. Each shock is built around a polished billet Springer® shock aluminum body. (Repl OEM 54483-88). Made in the USA. 230-508 Front shock. . . . . . . . . . . . . . . . . . . . . . . . . $239.99 Axle Kits for Paughco Wide Tapered Rear Leg Springers These 3/4" diameter axle kits are intended for use with Paughco’s popular Springer®, and will let you adapt a wide variety of wheel and caliper packages to these fork assemblies. They include all required spacers and nuts. For use with 230-535, 230-536 and 230-537. Made in the USA. 220-329 For single or dual-flange wide hub wheels when no brakes or speedometer drive are required . . . . . . . . . . . . . . . $99.99 220-330 For single or dual-flange wide hub wheels when used with Performance Machine’s 125x2 calipers in single or dual-disc applications (there is no provision for a speedometer drive) $99.99 220-331 For use with single-disc 1984-99 FXST Softail® hubs with OEM bearing spacers removed (other hubs may require different spacing) Use with Paughco 243-065 or 243-080 caliper kits (sold separately) . . . . . . . . . . . . . . . . . . . $134.99 220-329 220-330 220-331 220-332 SAVE! D N A N I O J RYDAY UP 0% EVE E TO 1 S RECEIV MEMBER B U L C D OL PLUS! G ING! P P I H S 9. 9 1 E $ E R E R RDERS OV F ON ALL O 99* apply) clusions (some ex 220-333 FREE GIFT! 99 $24.e valu How J&P Cycles® Changed the American Motorcycle Industry book. 220-332 For use with 1973-84 4-speed FL, and 1980-83 dual-disc FXWG hubs with OEM bearing spacers removed (other hubs may require different spacing) Use with Paughco 243-065 and 243-080 caliper kits (sold separately) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $119.99 220-333 For use with single-disc 1984-99 FXST Softail® hubs and the OEM Springer® caliper mount (OEM Springer caliper mount shown for illustration purposes only, not included). . . . . . . . . . . . . . . . $99.99 Rear Rocker Stud Assembly for 1930-48 Big Twin Springer® Contains one hardened and ground bushing, one hardened and ground rocker stud with spool spacer and 3/8"-24 nut for fender mount, one 1/2"-20 hardened mounting nut and one lock tab. Made in the USA. 433-895 1930-48 Big Twin Springer®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $48.99 7112009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=8http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=8Fork Assemblies and Custom Fork Legs Single-Disc Fork Tube and Slider Assemblies with TÜV Approved for 1984-99 Big Twin Complete front fork leg kits available with polished or chromed sliders. These fork sliders are highly-polished and Chrome for the finest finish available. Each set includes hard-chromed fork tubes, sliders, springs, caps, and all internal components. Some assembly required. Sold in sets. 2300346 231-335 Fits FL Softail® 1986-99 (except FLSTS) 2300346 Chrome, stock length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $549.99 Fits FX Softail®, Dyna Wide Glide® and 4-Speed FXWG 1984-99 (except FXSTS) Polished Chrome 230-798 230-799 230-800 230-801 230-802 Stock length. . . . . . . . . . . . . $699.99 2" over stock . . . . . . . . . . . . $749.99 4" over stock . . . . . . . . . . . . $764.99 6" over stock . . . . . . . . . . . . $778.99 8" over stock . . . . . . . . . . . . $792.99 230-803 230-804 230-805 230-806 230-807 Stock length. . . . . . . . . . . . . $599.99 2" over stock . . . . . . . . . . . . $799.99 4" over stock . . . . . . . . . . . . $835.99 6" over stock . . . . . . . . . . . . $849.99 8" over stock . . . . . . . . . . . . $864.99 231-335 231-535 Lower Leg Accents for 2000-09 Touring Models One of the most notable features of the big H-D® touring rig is the big burley front end. What a shame that the lower legs and brake calipers come from the factory with polishing imperfections, and such an uninspiring dull finish! This innovative kit provides an easy, low-cost way to put a flawless chrome finish on the lower legs (from the fender mounting bosses down) and the brake calipers with no need to dismantle the front end! Constructed of beautifully chromed stamped steel for a long and beautiful life. 231-335 2000-07 FLHT, FLHR, FLHX/I Street Glide® FLHX, FLT, Road Glide® (set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99 231-535 2008-09 Touring (set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99 2300423 Single-Disc Fork Tube and Slider Assemblies for 1984-99 Big Twin Value-priced alternatives to the single-disc leg assemblies complete with polished or chrome-plated lower sliders. Includes hard-chromed fork tubes, sliders, springs, caps, and all internal components, completely assembled and ready-to-install. Sold in sets. Fit 1984-99 FX Softail®, Dyna Wide Glide® and 4-Speed FXWG (except FXSTS) 230-811 Chrome, 2" over stock . . . . $499.99 2300423 Chrome, stock. . . . . . . . . . . . $499.99 230-812 Polished, stock . . . . . . . . . . . $459.99 230-815 Polished, 6" over stock . . . $399.99 230-809 Polished, stock length . . . . $449.99 Fits 1986-99 FL Softail® (except FLSTS) 230-808 Chrome, stock length . . . . $499.99 Milwaukee Twins™ Chrome Billet Pointed 41mm Fork Lower Leg Set for 1984-99 Models These Milwaukee Twins™ chrome billet lower legs will give your bike a totally new custom look. Fit single-disc 41mm front forks on 1984-99 FXST, 1985-86 FXWG, and 1993-99 FXDWG models. Each lower leg set includes a flush mount axle, fender and caliper mounts that are removable for custom changes, and chrome fork boot covers. Use these exciting new Milwaukee Twins™ legs to replace your dull OEM units or use as a base to create your own exciting totally custom front fork assembly. 2300455 Pointed lower leg set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $449.99 Milwaukee Twins™ Billet Lower Fork Legs for 1984-99 FXST, FXDWG and FXWG Milwaukee Twins™ billet lower fork legs will add show-stopping style to the 41mm front forks on 1984-99 FXST, 1985-86 FXWG, and 1993-99 FXDWG models. Made from billet aluminum, these legs are finely polished then given flawless chrome plating. Each set comes with a flush mount axle and chrome billet fork boot caps. Easily replaces the stock OEM lower fork legs or can be used to create a custom 41mm2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=9http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=9Fork Tubes and Sliders Chrome Fork Tubes for 1949-2009 Models These fork tubes are made from the finest steel available and centerless ground for a perfect fit. The show-chrome plating adds that extra “touch of class”. Available for most 1949-2009 models. Sold in pairs. Note: Careful evaluation of fender-to-frame clearance required with shorter-than-stock tubes. Chrome Wide Glide® 41mm Fork Tubes For 2000-09 FLSTC/F, FXST, 2000-05 FXDWG, 2000-01 FLT, FLHT and 2000-08 FLHR Designed to fit a wide variety of models. Made by Custom Cycle Engineering. Sold in pairs. Made in the USA. 230-268 Stock length (201/4") (OEM45890-97 FLT/FLHT) . . . . . . . . . . . $182.99 230-270 Stock length (221/4") (OEM 45930-00 FLST/C/F) . . . . . . . . . . $187.99 230-271 Stock length (241/4") (OEM 45417-00 FXST/C, 2000-05 FXDWG) . . . . . . . . . . . . . . . . . . . $189.99 230-272 (261/4") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $196.99 230-269 (281/4") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $193.99 230-273 (301/4") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $194.99 230-260 (321/4") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99 230-261 (341/4") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $226.99 230-263 (381/4") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $214.99 Fits Sportster® & K 1954-72; FX 1971-72, 33.4mm 230-037 2" under stock length . . . . . . . . . . . . . . . $145.99 230-616 Stock Length 223/4" long (OEM 45953-71) . . . . . . . . . . . . . . . . . . . . $164.99 230-559 2" over stock length . . . . . . . . . . . . . . . . $183.99 230-560 4" over stock length . . . . . . . . . . . . . . . . $169.99 230-038 6" over stock length . . . . . . . . . . . . . . . . $189.99 Fits Sportster® & FXR with 39mm Showa fork 1988-2003 (except Sport Edition®, Convertible™, FXRT & 1992-2000 Hugger®) 230-266 4" under stock length . . . . . . . . . . . . . . . $153.99 230-614 2" under stock length . . . . . . . . . . . . . . . $169.99 230-576 Stock length, 253/8" long (OEM 45393-87) . . . . . . . . . . . . . . . . . . . . $153.99 230-577 2" over stock length . . . . . . . . . . . . . . . . $169.99 230-604 4" over stock length . . . . . . . . . . . . . . . . $189.99 Fits Sportster® 1973-74; FX & FXE 1973-76 (Kayaba Forks), 35mm 230-034 2" under stock length . . . . . . . . . . . . . . . $137.99 230-612 Stock length 231/2" long (OEM 45977-73) . . . . . . . . . . . . . . . . . . . . $169.99 230-599 2" over stock length . . . . . . . . . . . . . . . . $144.99 230-595 4" over stock length . . . . . . . . . . . . . . . . $154.99 230-572 6" over stock length . . . . . . . . . . . . . . . . $189.99 Fits FXRS Sport Edition®, FXRS Convertible™ & FXRT with 39mm Showa fork 1987-93 230-266 4" under stock length . . . . . . . . . . . . . . . $153.99 230-614 2" under stock length . . . . . . . . . . . . . . . $169.99 230-576 Stock length, 253/8" long (OEM 45393-87) . . . . . . . . . . . . . . . . . . . . $153.99 230-577 2" over stock length . . . . . . . . . . . . . . . . $169.99 230-604 4" over stock length . . . . . . . . . . . . . . . . $189.99 Fits XLH, XLCH, XLCR 1975-83; XLX & XLS 1983 only; FX, FXE & FXEF 1976-83 (Showa Forks), 35mm 230-265 4" under stock length . . . . . . . . . . . . . . . $149.99 230-613 2" under stock length . . . . . . . . . . . . . . . $172.99 230-546 Stock length 251/4" long (OEM 45644-77) . . . . . . . . . . . . . . . . . . . . $156.99 230-573 2" over stock length . . . . . . . . . . . . . . . . $179.99 230-596 4" over stock length . . . . . . . . . . . . . . . . $196.99 Fits FL & FLH 1949-E77, 41mm 2300362 Stock length, 201/2" long (OEM 45950-48) (pair) . . . . . . . . . . . . . . $161.99 230-598 2" over stock length . . . . . . . . . . . . . . . . $129.99 230-593 4" over stock length . . . . . . . . . . . . . . . . $149.99 230-594 6" over stock length . . . . . . . . . . . . . . . . $149.99 Fits XLS 1979-82; FXS, FXB, FXSB, FXR and FXRS 1977-83 2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=10http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=10Fork Legs, Sliders and Internal Parts Fork Tube Component Parts for 1949-99 Models For original equipment fork tube assemblies or to replace damaged or worn OEM parts. A B C D K L M N T U V W For FXWG 1980-83 2300195 2300090 2300140 2300190 230-575 230-557 2300295 2300060 2300345 2300265 2300090 2300140 2300340 2300362 230-555 2300115 230-606 2300195 2300090 2300140 2300190 230-605 230-618 230-332 230-500 2300181 2300180 2300060 2300345 (A) Chrome fork tube cap (OEM 45419-80) (pair) . . . . . . . . . $16.99 (B) Chrome spacer washer (OEM 5710) (pair) . . . . . . . . . . . . . . $1.99 (C) Fork tube plug oil seal (OEM 45733-48) (pair) . . . . . . . . . . $2.99 (D) Chrome fork tube plug with O-ring (OEM 45838-77) (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.99 (E) Chrome fork tube (OEM 45417-80) (pair) . . . . . . . . . . . . $164.99 (F) Fork spring (OEM 46048-80) (pair) . . . . . . . . . . . . . . . . . . . . $53.99 (G) Damper tube with screw (OEM 45418-80) (each) . . . . . $16.99 (H) Damper rebound spring for FX Softail® and 4-speed FXWG (OEM 45855-77) (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.99 (I) Lower stop (OEM 45834-77) (each). . . . . . . . . . . . . . . . . . . . $11.99 (K) Chrome fork tube cap (OEM 45754-60) (pair) . . . . . . . . . $16.99 (L) Chrome spacer washer (OEM 5710) (pair) . . . . . . . . . . . . . . $1.99 (M)Fork tube plug oil seal (OEM 45733-48) (pair) . . . . . . . . . $2.99 (N) Chrome fork tube plug (OEM 45776-49) (pair) . . . . . . . . $19.99 (O) Chrome fork tube (OEM 45950-48) (pair). . . . . . . . . . . . $161.99 (P) Fork spring (OEM 46051-49A) (pair). . . . . . . . . . . . . . . . . . $45.99 (Q) Dampener assembly (OEM 46161-49) (each) . . . . . . . . . $34.99 (R) Dampener retaining ring (OEM 46172-48) (pair) . . . . . . . $1.99 (T) Chrome fork tube cap (OEM 45419-80) (pair) . . . . . . . . . $16.99 (U) Chrome spacer washer (OEM 5710) (pair). . . . . . . . . . . . . . $1.99 (V)Fork tube plug oil seal (OEM 45838-77) (pair) . . . . . . . . . . $2.99 (W) Chrome fork tube plug with O-ring (OEM45838-77) (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.99 (X) Chrome fork tube for FL Softail® (OEM 45930-86) (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $145.99 (X) Chrome fork tube for FX Softail® and 4-speed FXWG (OEM 45417-84) (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $164.99 (Y) Fork spring for FL Softail® model (OEM 45931-86) (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $48.99 (Y) Fork spring for FX Softail® and 4-speed FXWG (OEM 46048-84) (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $48.99 (Z) Damper tube with screw for FL Softail® (OEM 45932-86) (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99 (Z) Damper tube with screw for FX Softail® and 4-speed FXWG (OEM 45418-84) (each) . . . . . . . . . . . . . . $19.99 (AA) Damper rebound spring for FX Softail® and 4-speed FXWG (OEM 45855-77) (each) . . . . . . . . . . . . . . . $4.99 (BB) Lower stop (OEM 45834-77) (each). . . . . . . . . . . . . . . . . . $11.99 For FL 1949-Early 1977 E Fork Tube for 1980-83 FXWG Fork Tube for 1949-E1977 FL P For all Softail® and 4-Speed FXWG 1984-99 F Y G Q Z H R I AA BB S 41mm Fork Leg Sets for 1949-99 Big Twin Polished fork leg sets for most Wide Glide® forks from 1949-77. Like individual fork legs, these sets have all bushings and seals included and are ready for use. All of our fork legs are equipped with the late-style double-lip fork seals, and the polished legs for FL models have had the drain plugs eliminated. 2300220 (A,B) Polished, (single disc) brake fork leg set for 1972-E77 FL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $269.99 2300215 (A,C) Polished, (left drum) brake fork leg set for 1949-68 FL . . . . . . . . . . . . . . . . . . . . . . . . . .2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=11http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=11Fork Lowering Kits and Fork Tube Springs 230-583 230-456 230-609 230-452 230-457 230-882 230-554 41mm Fork Tube Internals for 1949-99 H-D® Models Fork tube internal assemblies include chrome fork tube plug and caps, seals, springs and damper kit. 230-883 1949-76 FLH. . . . . . . . . . . . . . . . . . . . . . . . $186.99 230-884 1977-84 FLH. . . . . . . . . . . . . . . . . . . . . . . . $159.99 230-882 1984-99 Softail® . . . . . . . . . . . . . . . . . . . . $159.99 Progressive® Suspension Fork Lowering Kits for 1977-2009 Models An easy and inexpensive way to drop the front end one or two inches. Progressively-wound fork springs, spacers, and lowering components. Made in the USA. Note: Careful evaluation of fender-to-frame clearance required when installing any lowering kit. 230-452 For all 41mm Showa forks on 1980-2009 Softail®, FXWG, Dyna Wide Glide® and L19772000 Dresser®, 2002-09 FLHR (except 200608 Dyna® & Rocker®) . . . . . . . . . . . . . . . $108.99 230-444 Fits 39mm Showa forks on 1987-2005 Sportster®,1987-2009 FXR and Dyna Glide® (except XL Sport, FXDX & 2006-09 Dyna®) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $108.99 701-637 Fits 35mm Showa and Kayaba forks on all Sportser®, FX, and FXR 1984-87. . . . . . $108.99 230-334 Fits 2002-09 V-ROD® models (drops the front end 1") . . . . . . . . . . . $108.99 231-330 Fits 2006-09 Dyna® . . . . . . . . . . . . . . . . . $108.99 230-608 Progressive Suspension Stock-Height Fork Spring Kits for 1949-2009 H-D® Progressively-wound springs are made using the finest spring material with a Manufacturer's Lifetime Warranty. They eliminate sag, reduce nose dive under braking, improve stability and increase ride comfort. Sold in sets that include correct spacers for the application. Made in the USA. 230-456 For all 41mm forks on FLT, FLHT, Road King®, Softail®, Dyna Wide Glide® and 4-speed FL or FXWG 1949-2009 (except 06-09 Dyna® & 08-09 Rocker®) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $82.99 230-609 For 39mm Showa forks on 1987-94 FXLR and 1988-2003 Sportster® and FXR (except Hugger®, Convertible™, Sport Edition® and FXRT) . . . . . . . . . . . $82.99 230-554 For 39mm Showa forks on Sportster® Standard and Deluxe 1994-2003; Sportster® 883 Hugger® and 1200C 1992-2003; Dyna® Super Glide® 1995-2005. . . . . . . . . . . . . . $82.99 230-583 For 39mm Showa forks on FXDL 1993-2005; FXDS Convertible™ 1994-2005; FXDB and FXDC 1991 and 1992; FXRS Sport 1987-94; FXRT and FXRS Convertible™ 1988-94. $82.99 230-457 For all 35mm Showa forks 1975-87 . . . $82.99 230-333 Fits 2002-09 V-Rod® models . . . . . . . . . . $82.99 230-770 Fits 2004-09 Sportster® models. . . . . . . $82.99 230-676 Internal Parts for 1984-99 41mm Forks These complete kits really simplify the process when looking for parts to rebuild worn out forks or building from scratch. Fits 1984-99 FXST and FXSTC, and 1993-99 FXDWG. Slider bushings, fork seals, seal washers and retainers are available only in the complete kit for 2 fork tubes. 230-676 Internal parts kit . . . . . . . . . . . . . . . . . . . . $139.99 230-455 230-454 Fork Lowering Kits for 1977-2009 Big Twin and Sportster® Lower the front forks 11/4" or 2" depending on spacer used. Easy installation with only minor disassembly of forks necessary, and easy to return to stock - simply put original fork springs back in. Progressively wound springs deliver a compliant ride, yet resist bottoming, and bottom at the same point as stock to maintain ground clearance. Made in the USA. Note: Careful evaluation of fender-to-frame clearance required when installing any lowering kit. FL models must only lower 1". 230-455 Fits the 41mm Showa forks on all Dresser® L1977-2001, 2002-08 FLHR, FXWG, Softail® and Dyna Wide Glide® late 1980-2009 (except 2006-09 Dyna® and 2008-09 Rocker®) . . . . . . . . . . . . . $109.99 230-454 Fits the 39mm Showa forks on Sportster®, FXR and Dyna Glide® 1987-2006 (except FXDX, XL 1200S & 06 Dyna®)2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=12http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=12Internal Fork Parts Fork Bushings for 1949-2009 Big Twin and Sportster® 230-551 HighPerformance Damper Tubes for 1987-2004 39mm Forks Progressive® Suspension damper tubes will do for the front end what their shocks do for the rear, which is dramatically improve the ride quality and handling of your motorcycle. The stock 39mm forks lack rebound damping and no amount of modification will completely cure the problem. However, the installation of these damper tubes in conjunction with a set of Progressive® Suspension fork springs (230-583 or 230-609) will improve your handling so much that you won’t believe you’re riding the same motorcycle. Fit all 1987-2004 models with 39mm forks (except 1992-2003 Hugger® and Dyna Glides®). Made in the USA. Note: WIll not fit 2004-08 Sportster® 230-285 Damper tube set . . . . . . . . . . . . . . . . . . . $119.99 Fork Bushings for 1949-2009 Big Twin and Sportster® 230-551 1949-77 FLH (OEM 45823-49, 45824-49) (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $44.99 230-058 1952-72 XL-FX (OEM 45818-52) (4-pk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $103.99 2300407 1984-87 XL-FXR, upper (OEM 45413-84) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.99 2300408 1984-87 XL-FXR, lower (OEM 45416-84) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.99 2300405 1988-2009 XL-FXR, upper (OEM 45461-87) (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99 2300406 1988-2009 XL-FXR, lower (OEM 45465-87) (pair). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $13.99 230-489 1980-83 FXWG (OEM 45940-80) (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99 2300285 1984-2009 FXST-FLT, (except FXDWG), upper (OEM 45940-84) . . . . . . . . . . . . . . . . . . . . . $12.99 2300409 1984-2009 FXST-FLT, (except FXDWG, lower) (OEM 45866-84) (pair) . . . . . . . . . . . . . . . $19.99 Air Control O-Ring Kit for 1984-96 FLT/FXR Kit includes all O-rings and seals needed to repair a leaking air control system. Fits 1984-96 FLT and 1984-93 FXR models with air control front forks. Made in the USA. 230-869 O-ring kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99 Fork Tube Baffle Valve Assembly for 1949-E77 FL Accurate reproductions of all the parts that went into the baffle valve and brought together as an assembly under one part number. Fits the front forks of all 1949-E77 FL. 2300080 Baffle Valve (each) . . . . . . . . . . . . . . . . . . . $17.99 2300422 2300180 Front Fork Damper Set for 1949-E77 Models Fork damper tube kit includes for 2 sides; the damper tubes with rings, screws and washers, lower stops, slider seal washers and retaining rings. Fits 1949-E77 Glide Internals. Component Parts 2300125 Leg Cap (OEM 45836-48) . . . . . . . . . . . . . $14.99 430-375 Glide axle leg cap 1949-77 FLH (OEM 45836-48). . . . . . . . . . . . . . . . . . . . . . $23.99 230-056 Damper tube only (OEM 46100-48) (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $53.99 230-009 Gasket (OEM 46111-48) . . . . . . . . . . . . . . $11.99 230-055 Lower damper bushing (OEM 46121-48) (pair) . . . . . . . . . . . . . . . $21.99 230-606 Dampener retaining ring (OEM 46172-48) (pair). . . . . . . . . . . . . . . . . $1.99 230-484 Damper valve spring (OEM 46161-49) (each) . . . . . . . . . . . . . . . . $1.99 230-585 Fork spring (OEM 46051-49A) . . . . . . . . $44.99 230-073 Damper valve kit (OEM 46161-49) . . . . $79.99 230-040 Damper shim (OEM 45826-49). . . . . . . . $21.99 230-553 Studs and nuts (OEM 7725 & 45840-48) (USA) . . . . . . . . . $9.99 230-930 Lower snap ring . . . . . . . . . . . . . . . . . . . . . . . $2.99 2300115 Dampener assembly (OEM 46161-49) (each). . . . . . . . . . . . . . . $34.99 430-376 Complete leg assembly (pair). . . . . . . $306.99 230-010 +6 41mm Chrome fork tube assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=13http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=13Smooth Custom Fork Tube Plug This custom, chrome-plated, chopper-style fork tube plug replaces (OEM 45419-80). Complete with (5710) washer. Sold each. Ball Milled Made in the USA. 220-242 Fits 1978-2009 FL, FXWG, Softail® . . . . . . . . $24.99 220-243 Fits 1988-2009 Narrow Glide Forks, (except FXDX and 2006-09 Dyna®) . . . . . . $24.99 Fork Tube Parts Chrome Fork Tube Caps for 1949-2009 Models 2300065 For all models, 1973-85 (OEM 45993-73) (pair). . . . . . . . . . . $18.99 230-996 Chrome, FL 1949-E77 (45754-49) (each) (USA) . . . $19.99 230-997 Zinc, Fits FL 1960-E77 (OEM 45754-49) (each) (USA) . . . . . . . . . . $17.99 230-997 2300195 Joker Fork Sleeve Dust Covers If you want a major cosmetic improvement to your stock lower fork legs, check these covers out! Machined from solid bar (not spun) to precisely slide over the outside of the existing black plastic covers found on stock lower fork legs. Offered in your choice of smooth or ball-milled outer finish (sold fully chrome-plated). Covers outside of (OEM 45419-80) dust cover (41mm only) on 1984-2006 FXDWG, 2000-09 FXSTC. Made in the USA. Note: Disassembly of forks is required. 231-530 Ball-milled . . . . . . . . . . $86.99 231-531 Smooth. . . . . . . . . . . . . $86.99 2300065 2300065 230-998 Fits FL 1960-E77, Chrome, flat top (each) (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99 230-592 Sportster® and FXR with coarse threads and 35mm fork tubes 1986-87 (OEM 45993-86) (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99 2300265 FL 1949-E77 (OEM 45754-60) (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.99 2300195 FXST, FXDWG, FXWG 1980-2009 (except for 06-09 Dyna®) (pair) . . . $16.99 Six-Shooter Fork Tube Cap Covers The popular .44 caliber line of accessories from Choppers, Inc., now includes these great fork tube cap covers. They fit all 1986-2008 41mm and 39mm fork tube caps (except 2006-08 Dyna®) Made in the USA. 230-874 Fork tube cap covers (pair) . . . . . . . . . . . . . . . . . . . . . $109.99 Ness Retro Fork Boot Covers for 1986-2009 FL Looking for that finishing touch on your FL front end? The latest creation from Arlen Ness will fit the bill. CNC-machined from 6061-T6 billet aluminum, these Retro Fork boot covers will complete the look. Will require disassembly of your fork assembly. Fits 1986-2009 Dresser® and Road King®, 2006-09 FL Softail® models. Another innovative creation from the King of custom. Sold in pairs. Made in the USA. 231-345 Fork Seal Installation Tool This fork seal installation tool provides for perfect alignment and installation of fork seals on early and late HD® front suspension. Made of 6061-T6 aluminum, it makes the job of replacing fork seals quick, easy, and professional. 910-582 39mm for 1987-07 Narrow Gilde® FX, XL, FXR. . . . . . $79.99 910-581 41mm for 1949-09 Wide Gilde® FL, FXWG, FXST, FLST, FLH . . . . . . . . . . . . . . . . . . . $79.99 910-855 49 mm for 2006-09 Dyna®, V-Rod® . . . . . . . . . . . . . . . . $79.99 231-346 Chrome 231-345 1986-2009 FLT, FLHR, FLST & 90-06 FLSTF . . . . . . $199.99 231-347 1986-2009 FLH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99 Chrome Billet Fork Tube Nut Covers for 1997-2009 Models Great bullet design from Joker Machine, made for 1997-2009 (except 2006-09 Dyna®) fork tube nuts. Smooth design matches the OEM stem nut cover. Sold in pairs. Made in the USA. 230-339 Series 2000 fork tube nut covers . . . . . . . . . . . . $54.99 Black 231-346 1986-2009 FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99 231-348 1986-2009 FLHT & 06-09 FLHX. . . . . . . . . . . . . . . . . $199.99 231-345 Black Diamond Cut 231-430 1986-2009 FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $299.99 231-432 2008-09 FLHT, 2006-09 FLHX . . . . . . . . . . . . . . . . . . $299.99 231-430 E-Z Fill Fork Tube 2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=14http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=14Fork Seals and Boot Covers Fork Seal Kits Superconvenient fork rebuilding kits. Each kit includes a pair of fork seals, and if necessary, washers to completely rebuild your forks. Chrome Fork Boot Covers for 1975-2009 Models These high-luster chrome covers are used to dress up the front legs. Fit easily over the rubber dust boot without disassembling the front end. Each 2-piece cover is held together with 2 interlocking springs. 2300335 1980-2009 FXST, FXWG (except 2008-09 Rocker®) (OEM 45415-82) 41mm. . . . . . . . . . . . . . . . . . . . . $19.99 2300336 1976-87 FX, FXR and 1975-87 Sportster® (OEM 45411-82) 35mm. . . . . . . . . . . . . . . . . . . . . $19.99 6000715 Replacement springs for 2300335 (pair). . . . . $1.99 2300360 Replacement springs for 2300336 (pair). . . . . $1.99 2300335 For Sportster®, Dyna Glide®, FX and FXR 1971-2009 231-023 231-024 2300330 2300329 2300325 2300326 2300328 1952-70 Sportster , 33.4mm (gasket only) . . . . . . . . . . . . . . . . . . . . . . . . . $16.99 1971-72 Sportster®, 33.4mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99 Sportster® and FX 1971-72, 33.4mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.99 Sportster® and FX 1973-76 equipped with Kayaba forks, 35mm . . . . . . $4.99 Sportster®, FX, and FXR 1975-83 equipped with Showa forks, 35mm . . $9.99 Sportster®, FX and FXR 1984-87 equipped with 35mm Showa forks. . . $9.99 1987-2009 FXR and Sportster and 1987-2005 Dyna® equipped with 39mm Showa forks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.99 ® 2300336 2300159 Fork Leg Seals for 1949-2009 Models Front fork seals. Sold in pairs. 2300165 For Sportster®, Dyna Glide®, FX and FXR, 35mm, 39mm 2300156 Sportster®, FX 1973-76 equipped with Kayaba forks (OEM 45927-73) . $5.99 2300157 Sportster®, FX, FXR 1975-83 equipped with Showa forks (OEM 45400-75) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.99 2300158 Sportster®, FX, FXR 1984-87 equipped with 35mm Showa forks (OEM 45387-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.99 2300165 Sportster® 1987-2009, Dyna Glide®, FXR 1987-2005, equipped with 39mm Showa Forks (OEM 45378-87) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99 For FL, FLT/FLHT, 4-Speed FXWG, all 1949-2009 Softail®, and Dyna Wide Glide® (except 2006-09 Dyna® and 2008-09 Rocker™) 2300135 2300354 2300300 2300290 1949-E77 FL, 41mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99 Upgrade kit fits 1949-E77 FL, FLH; includes triple-lip fork seals . . . . . . $12.99 FL L1977-84, FXWG and FLT/FLHT 1980-83 41mm . . . . . . . . . . . . . . . . . . $11.99 FLT/FLHT, 4-speed FXWG, all Softail®, and Dyna Wide Glide® 1984-2009 (except 2006-09 Dyna® and 2008-09 Rocker®) 41mm. . . . . . . . . . . . . $12.99 Slider Seal Washers for 1949-2009 Models Washers are zinc plated.Sold each. 230-045 230-564 230-523 230-565 230-524 Seals only (OEM 45852-48) (5-pk). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99 1949-76 FL-FLH (OEM 45854-48) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.99 1977-84 FL, 1980-86 FXWG and 1984-86 FXST (OEM 45844-77). . . . . . . $1.99 1987-2009 FXST (OEM 45865-84) (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.99 1973-76 FX-XL (OEM 45928-73) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.99 For FL, FLT/FLHT, 4-Speed FXWG, All Softail® & Dyna Wide Glide®, 41mm 2300155 1949-E77 FL (OEM 45852-48). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.99 2300327 FL L1977-84, FXWG and FLT/FLHT 1980-83 (OEM 45843-77) . . . . . . . . . . $6.99 2300159 FLT/FLHT, 4-speed FXWG, all Softail® Dyna Wide Glide® 1984-2009 (2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=15http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=15Chrome Two-Piece Fork Covers for 1980-2009 ‘Dresser®’ Models Dress up your bike in minutes with these easy-toinstall covers. No disassembly of the forks is required and the factory part need not be removed. Sold in pairs. 230-713 Road King® 1994-2009 (Repl. OEM 68062-94) . . . . . . . . . . . . . . $39.99 2300430 FLHT, FLHTC, FLHTC-U. L1986-2008 (Repl. OEM 68063-94) . . . . . . . . . . . . . . $49.99 2300431 FLT, FLTC, FLTC-U. 1980-2007, FLHS 1987-93 (Repl. OEM 68064-94) . . . . . . . . . . . . . . $49.99 2300431 Fork Braces, Fork Covers Black Red Rubber Fork Boots 230-486 Chrome Billet Aluminum Fork Braces for 1979-2009 Models Manufactured from a solid piece of 6061-T6 aluminum, then chrome-plated. Designed with a compound arch for greater torsional stiffness, which means not only less deflection and twisting but more fender clearance. Bolts to lower fork leg, which enables the use of dust covers. Made in the USA. 230-253 These old school ‘gator’ boots are available in black or red, in 39mm and 41mm sizes. The 39mm boots measure 7" extended, about 31/2" collapsed, with an upper ID of 11/2" (39mm) and a lower ID of 29/16" (65mm ). The 41mm boots measure 9" extended and about 41/2" collapsed, with an upper ID of 15/8" (41mm) and a lower ID of 29/16" (65mm). Sold in pairs. Note: Disassembly of forks is required. 702-201 39mm Black boots . . . . $39.99 2300012 41mm Black boots . . . . $39.99 702-203 39mm Red boots. . . . . . $39.99 702-202 41mm Red boots. . . . . . $39.99 230-254 230-486 41mm Wide Glide®, 1995-2005, FXDWG, 1984-2009 FXST & 1980-83 FXWG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $258.99 230-253 Fits 39mm Mid Glide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $264.99 230-254 39mm Narrow Glide, 1988-2009 (except 2006-08 Dyna®) . . . . . . . . . $259.99 230-255 35mm Narrow glide, 1979-87 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $264.99 230-256 41mm Deuce™, 2000-07 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $279.99 702-216 49mm 2006-09 FXD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $265.99 702-217 49mm 2006-09 FXDWG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $256.99 230-474 Chrome Fork Covers for 1986-2009 Trim strips replace OEM style alloy type. 230-556 Upper Fork Slider Covers for 1996-2008 FLHT, FLHTC, FLHTCV and FLHX You’d be amazed at the amount of time, materials and labor required to simply replace the stock stainless fork slider covers with chrome ones. These new covers provide the same shimmering chrome finish but install in only minutes over the stock covers - no need to disassemble the front end! Want to really look sharp, use 231-335 lower leg covers or 231-535 lower leg accents. Sold in pairs. Note: Does not fit Screamin’ Eagle® 700-565 Upper fork slider covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99 Sold in pairs. 230-474 Fits 1986-2009 FLST Softail® (Repl. OEM 67819-86). . . . . . . . . . . . . . . . . . $39.99 230-556 Fits 1986-2009 Heritage® style, (replaces 67819-86) has Heritage® Softail® and Fat Boy® style ridges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $59.99 2300305 Amber Red Fork Reflectors for 1972-99 Models 2300440 Amber front for most FX, FL, FXR and XL; Front fender on 1972-1984 FL and 1987-1999 FLHS, FLST/C (OEM 59254-72) (pair) . . . . . . . . . . . . . . . . . $16.99 2300441 Red, for most FX & FL rear fenders; struts on 1972-78 XL; saddlebags and sidecar on FLH and FLT (Replaces OEM 59255-72) (OEM 59255-72) (pair) . . . . . . . . . . . . . . . . . $16.99 Lower Fork Bracket Cover 230-447 940-186 Mirror finish chrome-plated onepiece cover for 1971-87 narrow glide models with lower tree tapped for cover. Models with lower tree not tapped for cover use 2300105. 2300305 Plain 2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=16http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=16Fork Trim and Braces Küryakyn™ Fork Brace for 1980-2009 Wide Glide® Front Ends The Küryakyn™ Wide Glide® fork brace securely ties the fork sliders together for a more rigid, smoother operating front end. By reducing fork flex, one can enjoy more aggressive, controlled cornering, smoother ride, and straighter, more predictable hard stopping. Aside from being one of the more functional accessories available, this is also a sweet looking item. Fits 1980-2009 HD® models equipped with unshrouded Wide Glide® front ends (FXSTC, FXWG, FXDWG, etc.) (except for 2006-09 FXDWGI and 2008-09 Rocker®). 230-451 Wide Glide® . . . . . . . . . . . . . . . . . . . . . . . . $155.99 230-000 Deuce™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $169.99 Küryakyn™ Fork Skins™ for 1988-2009 Models Nearly every biker lusts after the seductive gleam of a finely chromeplated front end. But when you add up the related costs of the actual plating, new seals, new fork oil, axle caps, chrome hardware, labor and a chrome fork brace, the final bill is realistically around $450 - not to mention a couple weeks of down time. This set will chrome-out a 39mm or 41mm front end and provide handling associated with a fork brace for less than half that, with no downtime. This kit is extremely fast and easy to install. Only four Allen wrenches and about 20 minutes are needed to transform the ordinary into the spectacular. Note: Fork Skins™ Fit all 39mm front ends found on 1982-2005 FXR, 1982-2003 Dyna®, 1988-2003 XL, and unshrouded 41mm front ends on 1991-2005 FXST, 1991-2003 FXDWG and FXWG, 1980-91 need to remove Reflector Boss. 230-440 Single-disc 39mm front ends 1988-99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99 230-223 Single-disc 39mm front ends 2000-03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99 230-326 41mm Wide Glide® front end for 2000-09 FXST, FXSTB, and 2000-05 FXDWG. . . . . . . . . . . . . . . . . . . . . $199.99 231-336 Fork Skins for 2004-09 Sportster® with 39mm Single-Disc Front Ends (set) . . . . . . . . . . . . . . . . . . . . . . $199.99 231-312 231-311 231-310 Fork Accent Kit for 1988-2006 FXSTS, 1997-2007 FLSTS, 2009 FLSTSB Chrome Lower Triple Tree Cover for 1971-87 Sportster® and FXR A three-piece assembly designed to cover the black wrinkle painted lower triple tree. Fits all 1983-85 XLX and XR 1000 or 1986-87 FXR Super Glide® and XL 883 without dismantling the forks. Installs with hand tools in minutes. Also ideal for any 1971-87 Sportster® or FX model where the original equipment one-piece cover is damaged or missing. 2300105 3-piece cover . . . . . . . . . . . . . . . . . . . . . . . . $36.99 700-562 Billet Fork Braces for 1988-2009 39 and 49mm Forks These chromed fork brackets are by far the best we’ve seen. Made from super strong 6061 aluminum, they really improve handling by stabilizing the fork legs and reducing fork flex. True style and function. 231-310 Fits 49 mm Wide Glide® forks, 2006-09 Dyna® Wide Glide® . . . . . . . . . $219.99 231-311 Fits 49 mm Narrow Glide® forks, 2006-09 Dyna®, Super Glide®, Street Bob®, Custom, Low Rider® and 35th Anniversary Super Glide® . . $219.99 231-312 Fits 39mm Narrow Glide® forks, 1988-2009 Sportster®, 1990-2005 Dyna®, & 1988-2000 FXR . . . . . . . . . . . . . . . . . . . $199.99 Chrome-plated inserts fit into the casting recesses in the fork and brake anchor arm. Installs easily using silicone adhesive. Makes an amazing difference in the finished look of the stock Springer® fork. 2300435 1988-2006 FXSTS,1997-2007 FLSTS, 2009 FLSTSB . . . . . . . . . . . . . . . . . . . . . . . . . $66.99 700-561 Aluminum Fork Brace for 1973-87 FX and FL Forged chrome brace combines form and function to create a lightweight, but extremely strong brace. Precise machining makes fit and installation a breeze. Improves the rigidity of forks for better han2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=17http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=17Fork Oil and Stem Nut Covers 2300175 2300333 150-203 150-204 Formotion® Waterproof Replacement Stem Nut Clocks Harley-Davidson® Fork Oil Developed by Harley-Davidson®, this fork oil is available in two different types. Check owner’s manual for your bike’s required type. Available in 16 oz. containers only. Made in the USA. 900-391 Type B H-D® fork oil. . . . . $5.99 900-392 Type E H-D® fork oil. . . . . $5.99 Ground ship only Note: J&P Cycles is not a licensed Harley-Davidson® dealer nor do we intend to represent ourselves as being affiliated with HarleyDavidson®. The Harley-Davidson® products on this page are purchased by J&P Cycles® from a licensed Harley-Davidson® dealer. ® 220-191 7200305 This quality alternative is 3 ATM waterproof rated and comes with polished stainless steel on the front and back. Use it in place of 7200305 with stem nuts 2300175 or 2300333. Its an exact fit and comes with a fully replaceable multi-year battery. 150-203 White face . . . . . . . . . . . . $24.99 150-204 Black face . . . . . . . . . . . . . $24.99 Chrome Stem Nut Covers with Clock These fork stem nut covers incorporate a replaceable quartz battery clock with classic Roman Numeral face markings. They’re CNC-machined from billet aluminum with a knurled band on their edges, and then chrome-plated for longlasting good looks. Note: The clock movement is not waterproof but is easily removed for washing or during inclement weather. Note: Battery required. Billet Fork Stem Cover with Clock or Thermometer for 1980-2009 Models Marlin’s offers these fork stem nut covers with clocks or thermometers. Made from billet aluminum then chrome-plated, these covers will add some style and class to your front forks. Clocks and thermometers come with either a white, electro lumincent, black horseshoe or black face and are waterproof, shock-resistant, with glow in the dark numbers. To activate the glow in the dark feature, the thermometers or clock must be exposed to a light source for a reasonable amount of time. For 39mm or 41mm front triple trees. Sold each. Progressive® Suspension Fork Oil Level Adjuster Simply adjust the aluminum stop to the desired fork oil level, insert in the top of the fork and extract the excess fork oil. Also good for removing unwanted fluids from hard to get places. Made in the USA. 230-441 Fork oil level adjuster. . $39.99 Fits 1980-2009 FXWG, Dyna Wide Glide® and Softail® (except Springer® and 2006-09 Dyna®) 2300175 With clock . . . . . . . . . . . . $39.99 7200305 Replacement clock . . . . $16.99 PJ1® Fork Oil PJ1 Fork Oil maintains the same viscosity at a wide range of outside temperatures. .5 liter bottle. Sold each. ® Fits Sportster®, FXR and Dyna Glide® equipped with 39mm Forks 1987-2009 (except 06-09 Dyna®) 2300333 With clock . . . . . . . . . . . . $39.99 7200305 Replacement clock . . . . $16.99 39mm Stem Covers Fits 1987-2009 Sportster®, FXR, and Dyna Glide® equipped with 39mm forks (except 2006-09 Dyna®). 220-190 White face clock. . . . . . . $69.99 220-191 Black face clock . . . . . . . $69.99 220-192 White face thermometer . . . . . . . . . $69.99 220-193 Black face thermometer . . . . . . . . . $69.99 730-698 White EL Push Button Back-Lit Face clock. . . . . . . . . . . . . $84.99 730-699 Black and Silver Horseshoe Face Clock . . . . . . . . . . . . $77.99 730-700 Black and Silver Horseshoe Face Thermometer . . . . $77.99 Fork Fluid Information Each slider tube Dry fork requires .5 to 1.0 oz. more. Use 20 weight for average conditions. For extreme conditions use 10 weight or 30 weight. *Oil drained, fork not disassembled. *Wet Dry / Oz. Oz. Sportster® thru 1972 5.5 / 6.5 Sportster® 1972-83 5.0 / 6.0 Sportster® 1984-87 5.4 / 6.5 ® Sportster 1988-2003 9.0 10.2 Sportster® 2004-08 10.5 11.6 Sportster® 883L 2004-09 11.3 / 12.3 XL 883 Hugger® thru 1991 9.0 / 10.2 XL Hugger 1992-99 10.7 / 12.1 FL/FLH 1948-E77 6.5 / 7.0 FL / FLH L1977-84 7.75 / 8.5 FLT 1980-97 7.75 / 8.5 FLT 1998-2001 8.7 / 9.7 See Service FLT 2002-06 Manual F2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=18http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=18Triple Tree Covers 2300451 2300380 2300334 2300050 2300261 2300339 2300045 Antique Headlight Trim for 1949-84 Big Twin Accurate reproductions of the obsolete 1949-84 Big Twin triple tree and headlight trim. Ideal for detailed restoration work or bringing a classic look to newer 1960-84 models. Triple Tree Top Covers for 1948-72 Models Original-style riser spacing with correct cutout for wire loom cover (230-924) (replaces OEM 45741-50) 2300452 Stainless Steel. . . . . . . . . $24.99 2300348 Chrome. . . . . . . . . . . . . . . $24.99 Chrome Fork Tins for 1986-2009 Heritage® Softail® and Fat Boy® These reproductions of the original equipment parts are made from highly-polished steel that is then given a lustrous chrome finish. They fit all 1986-2009 Heritage® Softail® and Fat Boy®, and include chrome-plated mounting hardware. Available with or without a matching set of chrome-plated fork slider covers. Note: Models equipped with accessory front passing lamps may need a hole drilled in rear panel to mount the on/off switch. 2300040 Chrome headlight tins, (3-piece kit) (OEMs 67808-86, 67816-86 and 67820-86). . . . . . . . . . . . . . . . . . . . . . . . . . $92.99 2300045 Chrome tins and slider covers (5-piece kit) (OEM 67808-86, 67820-86 and 45964-86) . . . . . . . . . . . . . . . . . . . . . . . . . $124.99 Triple Tree Top Covers 31/2" Center-to-Center for 1973-84 Models Original style cover with 31/2" center-to-center riser spacing for use on late-model triple trees. 2300451 Stainless Steel . . . . . . . . $19.99 2300334 Chrome . . . . . . . . . . . . . . $24.99 2300380 Chrome . . . . . . . . . . . . . . $36.99 Front Fork Panel 2300095 Stainless steel . . . . . . . . $31.99 Rear Right Hand Fork Panel 2300260 Stainless steel . . . . . . . . $23.99 Rear Left Hand Fork Panel 2300255 Stainless Steel . . . . . . . . $23.99 2300339 Chrome . . . . . . . . . . . . . . $24.99 Slider Covers Beautifully chromed slide covers, available in standard or 2" and 4" oversize lengths. Fits all 1949-88 4 and 5-speed Dressers®. Sold in pairs. Chrome 2300050 230-893 2300245 230-922 2300035 Stock length, 65/8" . . . . $36.99 1" over stock, 71/2" . . . . $53.99 4" over stock 101/2" . . . $54.99 3" over stock, 91/2" . . . . $65.99 2" over stock, 81/2" . . . . $38.99 Raw for Painting 230-911 Stock length. . . . . . . . . . $44.99 Stainless Steel 230-923 Stainless, 1" over stock, 71/2" . . . . . . . . . . . . . . . . . . $62.99 230-406 1949-84, 65/8" . . . . . . . . . $62.99 230-097 1949-84, 2" over stock $65.99 Lower Triple Tree Cover for 1980-E85 FXWG and Softail® Chromed duplicate of the OEM cover complete with buttonhead screws. 2300130 Fits 1980-E85 FXWG, 1984-E85 FXST (OEM 67773-80) . $18.99 Chrome Lower Triple Tree Covers for 1980-2009 Models Before After Lower Triple Tree Cover for 1994-2008 Road King® Smooth out the look of Road King® front ends with an easy-to-install lower triple tree cover. Chrome-plated stamped steel. 2300355 Fits 1994-2008 Road King® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $37.99 Chrome-plated stamped steel. This cover bolts under the lower triple tree in minutes to clean up this area on your motorcycle. 2300077 1980-2009 FXST, FXSTC, 1988-2008 FXDWG . . . . . . . . . . . . . . . . . . . . . . . . $32.99 Chrome Front Fork Air Deflector for 1980-2009 FLT This Chrome front fork air deflector fits 1980-2009 FLT and FLHT models. Will not work with 1998-2009 FLTR. (Replaces OEM 58520-79B). 2300006 Front fork air deflector $22.99 Lower Triple Tree Cover for 2002-07 Softail® Deuce™ Chrome cover dresses up the underside of lower triple trees on 2002-07 Softail® Deuce™. Includes mounting hardware. (Replaces OEM 66021-00). 230-902 Lower triple tree cover . . . . $56.99 GOLD CLUB MEMBERS SAVE 10% EVERY DAY! 7222009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=19http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=19Triple Trees for 41mm Fork Legs Made from 6061 Billet Aluminum, these triple trees Smooth 231-229 are drilled and tapped for internal fork stops. The kit includes stainless steel stems, nut, and stopper. They come in two Ball Milled styles: Ball Mill or Smooth and 231-234 both styles are available with or without holes for turn signals. Available in chrome or black anodized finish. Fits 1949-2009 FL, FXWG and FXST equipped with 41mm front end forks (except 2006-09 Dyna® and ALL FLT Models). Made in the USA. 2300457 Triple Trees 2300230 Milwaukee Twins™ Chrome Billet Tribal Triple Trees for 1949-2009 41mm Fork Assemblies The designers at Milwaukee Twins™ came up with this unique triple tree which is totally out of this world. Made of billet aluminum then given a show-chrome finish, these trees feature many small details that make them worth every dollar. The unique tribal styling sets these trees apart from everything else. The flowing tribal design will give your bike a mean but flowing look. The stem and fork tubes mount into the bottom of the upper tree to keep the top tree smooth. Comes with your choice of 3 degree or 5 degree rake. Fit 1949-2009 41mm fork assemblies. (except 2006-09 Dyna® & 08-09 Rocker™) 2300456 3 degree raked tree set . . . . . . . . . . . . . $399.99 2300457 5 degree raked tree set . . . . . . . . . . . . . $399.99 Triple Trees for 1949-99 Big Twin Fits all 1949-99 4-speed Big Twin and Softail®. Styled after 1960-84 triple trees and drilled and tapped for slider covers and early headlight, but with late-style, 4-piece rubber handlebar bushings. 41mm tubes. Note: The top trees are not drilled and tapped on the backside for headlight tins. 2300230 Chrome set. . . . . . . . . . . . . . . . . . . . . . . . . $299.99 230-041 Black set . . . . . . . . . . . . . . . . . . . . . . . . . . . $299.99 2300120 Chrome upper clamp only . . . . . . . . . . . $94.99 2300240 Chrome lower clamp only. . . . . . . . . . . $129.99 230-042 Black upper clamp only . . . . . . . . . . . . . . $89.99 230-043 Black lower clamp only . . . . . . . . . . . . . $129.99 Chrome 231-227 Ball Mill Style, No rake, without turn signal holes . . . . . . . . . . . $199.99 231-228 Ball Mill Style, No rake, wtih turn signal holes. . . . . . . . . . . . . . . $199.99 231-229 Smooth Style, No rake, without turn signal holes . . . . . . . . . . . $199.99 231-231 Smooth Style, No rake, with turn signal holes. . . . . . . . . . . . . . . $199.99 231-232 Smooth Style, 3 degree rake, without turn signal holes . . . . . . . . . . . $199.99 231-233 Smooth Style, 3 degree rake, with turn signal holes. . . . . . . . . . . . . . . $199.99 Fork Tin Support Bracket 230-337 Provides rear mount for side fork tin panels when the upper triple tree is not drilled or tapped. . . . . . . . . . . . . . . $14.99 2300365 Black Anodized 231-234 Ball Mill Style, No Rake, without turn signal holes . . . . . . . . . . . $199.99 231-249 Ball Mill Style, No Rake, with turn signal holes. . . . . . . . . . . . . . . $199.99 231-276 Smooth Style, No Rake, without turn signal holes . . . . . . . . . . . $199.99 231-277 Smooth Style, No Rake, with turn signal holes. . . . . . . . . . . . . . . $199.99 231-278 Smooth Style, 3 Degree, without turn signal holes . . . . . . . . . . . $199.99 231-279 Smooth Style, 3 Degree, with turn signal holes. . . . . . . . . . . . . . . $199.99 Milwaukee Twins™ Smooth Top Triple Tree Set for 1949-2009 Models Milwaukee Twins™ smooth top triple trees are CNCmachined from aircraft quality billet aluminum then chrome-plated for show-stopping appearance. The tension for the head cup bearing adjusts from the bottom, giving you a clean-looking installation. Features recessed underside headlight mount. Includes hardware, stem bolt, handlebar damper and fork stops. 2300365 Softail®, FXWG, FLH, and cast neck frames using 41mm tubes, 1949-2009 . . . . . . $299.99 231-129 Raked Billet Tree Sets for 1949-2009 41mm Fork Assemblies Chrome billet raked triple 2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=20http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=20Triple Trees 230-279 230-278 230-413 230-338 230-082 Stock Style Cast Triple Trees for 1954-2003 Lower Tree Applications 230-257 230-468 1971-72 FX, Big Twin and Sportster® only, 33.4mm tube (OEM 45567-71) . . . . . . $186.99 230-544 1973-83 all FX, 35mm tube (OEM 45608-77A) . . . . . . . . . . . . . . . . . . . $152.99 230-082 Chrome, 1973-83 all FX, 35mm tube (OEM 456087-77A). . . . . . . . . . . . . . . . . . $186.99 230-463 1984-86 all FX , (except FXWG, FXST and FXR), 35mm tube (OEM 45608-84) . . $229.99 230-078 1957-72 XL, 33.4mm tube (OEM 45703-71) 7/8" stem . . . . . . . . . . . . . . . . . . . . . . . . . . . $164.99 230-570 1973-77 XL, 35mm tube (OEM45703-73 ) 7/8" stem . . . . . . . . . . . . . . . . . . . . . . . . . . . $152.99 230-543 1978-81 XL, 35mm tube (OEM 45703-78) 15/16" stem . . . . . . . . . . . . . . . . . . . . . . . . . . $152.99 230-079 1981-83 XL, 35mm tube (OEM45693-81) 1" stem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $152.99 230-085 Chrome, 1984-87 XL, FXR and FXRS, 35mm tube (OEM 47693-84) . . . . . . . . . . . . . . . $203.99 230-469 1988-94 FXR, FXRT, 1988-2003 XL 1200 and 1995-2003 XL 883, 39mm tube (OEM45563-87 ) . . . . . . . . . . . . . . . . . . . . $235.99 230-471 1987-94 FXLR, 39mm tube (OEM 45561-87) . . . . . . . . . . . . . . . . . . . . $164.99 230-470 1988-94 XL 883, 39mm tube (OEM 45550-88) . . . . . . . . . . . . . . . . . . . . $235.99 230-472 1990-2001 FXD, FXDL, 39mm tube (OEM45598-90A) . . . . . . . . . . . . . . . . . . . $235.99 Chrome Billet Aluminum Wide Glide® Triple Trees for 1949-2009 Big Twin 600-961 230-418 These triple trees are CNC-machined chrome billet with ball-milled accents and stainless steel stems. These trees accept 41mm fork tubes and there is a hole in the center of the bottom tree for a headlight mount. Includes fork stops. Made in the USA. Note: 230-279 required to complete installation. 230-257 1949-2009 Triple Tree, Wide Glide® FL, FXWG, FXST, FLST & FXDWG (except FLT and 06-09 Dyna®) for 41mm fork tubes (set). . . . . . . . . . . $289.99 39mm Triple Tree Conversion Kit Available in a mid glide or Wide Glide® style, with smooth or ball-milled finish. Accepts the stock fork assembly, front fender, wheel, headlight and headlight visor. Kits include chrome upper and lower triple trees, stem, stem nut, fork stops, axle, axle spacers, fender spacers and rotor spacer. Neck-post bearings and dust covers must be purchased separately. Fit all 1987-09 (except 2006-09). Dyna Glide®, FXR and XL models with 39mm forks. Made in the USA. Note: Kits include a single-disc spacer; dual-disc applications require an additional spacer (sold separately). Chrome plated fork tube bolts and stem nut Smooth contour design on top to enhance the appearance of your bike. 230-279 Contoured stem nut, for 1971-86 35mm narrow glide forks on FX, XL and FXR (Replaces 45718-71) (each). . . . . . . . . . . $17.99 230-278 Contoured fork tube bolt, for Wide Glide® style forks 1977-2007 with non-vented fork stem nuts (Replaces 45839-77) (each) $17.99 Top Triple Tree for FX and Sportster® 230-077 1954-72 cast, 33mm tube (OEM 45739-62B) . . . . . . . . . . . . . . . . . . . $106.99 230-529 1973-87 cast, 35mm tube (OEM 45738-73). . . . . . . . . . . . . . . . . . . . . . $79.99 230-568 1973-87 polished, 35mm tube (OEM 45738-73). . . . . . . . . . . . . . . . . . . . . . $89.99 2300364 1973-87 Chrome, 35mm tube (OEM 45736-78B) . . . . . . . . . . . . . . . . . . . . $98.99 230-530 1988-94 FXR, 1988-2003 XL, 1991-2005 FXD, FXDL, 39mm tube (OEM 45739-87) . . . $98.99 Fork tube bolt washers Protect the finish of your chrome triple tree with these chrome fork tube bolt washers. 230-338 For 1978-2009 FL, FXWG and Softail® (OEM 5710) . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.99 Elite 2004-05 FXD 2004-09 Sportster® 1987-94 FXR & 1988-99 XL 2000-03 XL (except C models) 1991-99 Dyna Glide® 2000-03 Dyna Glide® Mid Glide Wide Glide $699.99 $759.99 231-115 231-119 231-225 230-2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=21http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=212300235 Triple Trees and Damper Hardware 702-094 Wide Glide® Conversion Kits for 1977-99 Models These kits will convert your narrow front end to the look of a Wide Glide® without the expense. Each kit includes: chrome-plated forged triple tree set with lower clamp cover, chrome headlight mount, special chrome fork tube plugs, chrome fork stop, chrome stem nut, chrome axle and axle spacer, and chrome fender spacers to permit the use of your stock fender. The 1977-83 Dual-Disc kit also includes two chrome rotor spacers with hardware, while the 1984-99 kits include one rotor spacer and a chrome hubcap for the right side of the wheel. These kits are complete with everything you’ll need for the conversion. Custom front fender is recommended for use with 19" or 21" wheels. Note: Kit 230-569 may require the use of 230-502 fork tube plugs on some 1986-87 models which have the later-style coarse threads in the top of the fork tubes. 2300453 will not work on 81 and earlier XL due to XL's smaller diameter neck. 230-569 Fits all Sportster® and FXR (except 1987 FXLR) with a single-disc and 35mm forks 1984-87 . . . . . . . . . . . $599.99 2300235 Fits all Sportster® and FXR (except FXLR) with a single-disc and 39mm forks 1987-99 . . . . . . . . . . . $499.99 2300453 Fits all 1977-83 dual-disc FX, 1982-83 XL . . . . . . . . . . . . . . . . . . . . . . . . . $549.99 Rev“O”lution Triple Trees for 1987-99 FX and Sportster® Models These mirror polished aluminum kits will convert your narrow front end into the Beefy looking Wide Glide® Style. Kits are made from billet aircraft quality aluminum and include all the necessary hardware. For 39mm applications. Fits 1987-94 FXR, 1990-99 Dyna® and 1987-99 Sportster®. 702-094 Complete kit, stock rake . . . . . . . . . . . . $459.99 702-095 Replacement wheel axle . . . . . . . . . . . . . $34.99 Fat Plate Rev“O”lution Wide Glide® Kit for 1977-86 FX, FXR, Dyna® and Sportster® Models These mirror polished aluminum kits have the same features as our other Rev“O”lution Wide Glide® kits but they feature extra-thick 25mm top and bottom plates. Machined from billet aircraft quality aluminum. Kits include all necessary hardware. Fits the FXR, XL, and Dyna® with 35mm fork tubes. Complete kits, stock rake. Note: For single-disc applications only. For dual-disc applications additional spacer 600-961 (page 724) is required. 2004-05 Dyna® requires a different axle 220-189 (Sold separately). 702-097 Fits 1977-86 FX . . . . . . . . . . . . . . . . . . . . . $529.99 230-744 230-732 230-731 B Custom Cycle Engineering Complete Fork Conversion Kits for 1977-2003 Models 230-729 A These complete kits include, front axle, axle spacers, one rotor spacer, and internal fork stop. 39mm Conversion Kits to Wide Glide Style Front Ends 230-738 Fits Sportster®, FXR 2000-03 . . . . . . . . . $724.99 230-739 Fits Sportster®, FXR 1988-99 . . . . . . . . . $724.99 230-742 Fits Dyna Glide® 2000-03 (uses OEM internal fork lock system) . . . . . . . . . . . . . . . . . . $724.99 230-743 Fits Dyna Glide® 1992-99 (uses OEM internal fork lock system) . . . . . . . . . . . . . . . . . . $724.99 D Chrome Triple Tree Sets for 1984-99 Softail® Chrome replacement triple tree sets include upper and lower tree, pinch bolts, dust cover and lower bearing. Meets European TÜV standards. 230-729 Fits FL Softail 1984-99 (set) . . . . . . . . $276.99 230-730 Fits FX Softail® 1984-99 and aftermarket cast neck frames (set) . . . . . . . . . . . . . . . . . . . $309.99 ® C 35mm Conversion Kits to Wide Glide Style 230-740 Fits Sportster®, FXR 1984-87 . . . . . . . . . $619.99 230-741 Fits FX and FXR 1977-83 . . . . . . . . . . . . $724.99 Steering Dampers and Clamps This steering damper is universal, multi-positional, and adjustable; and can be secured between the frame and most forks. Fork tube clamps sold separately. 230-242 (A) Alloy heavy duty . . . . . . . . . . . . . . . . . $79.99 230-251 (B) Black standard . . . . . . . . . . . . . . . . . . . $48.99 39mm2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=22http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=22Steering Hardware A B A 230-526 Stock Type Stem Nuts for 1936-2008 Models B C C D D F Made in the USA. E 1936-48 Big Twin, Springer® (OEM 48561-36) G 230-908 Steering Dampener Kit for 1984-2009 Dyna®, Sportster® and Softail® Complete kits for Softails® and Sportsters®. Includes a hi-tech adjustable steering dampener and all mounting hardware for a clean and quick installation. Improves the stability of the front end and provides more riding comfort. 230-407 FX Softail® 1984-99 (except Springer®) . . . . . . . . . . . . . . . . . $209.99 230-526 Sportsters® equipped with 39mm forks 1987-2003. . . . . . . . . . . . . . . . . . . . . . . . . . $209.99 230-847 2000-09 FXST. . . . . . . . . . . . . . . . . . . . . . . $209.99 230-848 1991-2005 Dyna® (except Dyna Wide Glide®) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $222.99 230-849 1993-2005 Dyna Wide Glide® . . . . . . . . $261.99 230-662 (A) Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . $14.99 230-200 (A) parkerized . . . . . . . . . . . . . . . . . . . . . . . $14.99 230-663 (A) cadmium . . . . . . . . . . . . . . . . . . . . . . . . $14.99 1936-57 45 Springer® (OEM 46560-40) 230-664 (A) chrome . . . . . . . . . . . . . . . . . . . . . . . . . . $16.99 230-154 (A) cadmium . . . . . . . . . . . . . . . . . . . . . . . . $14.99 230-155 (A) parkerized . . . . . . . . . . . . . . . . . . . . . . . $13.99 Steering Damper Hardware for 1949-59 FLH Glide For 1949-59 FL with drilled and tapped fork stem. 230-409 (A,B,D,G) Kit . . . . . . . . . . . . . . . . . . . . . . . . . $71.99 230-063 (A) Chrome adjusting knob kit with spring & spider washer (OEMs47640-48, 46751-48, 46710-48, 46715-48) . . . . . . . . . . . . . . . . . $39.99 241-709 Damper knob with cover (OEM 46740-48, 4671048) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $26.99 230-480 (B) Crenelated stem nut (Cad) (OEM 45718-48). . . . . . . . . . . . . . . . . . . . . . $23.99 230-550 (C) Chrome seal nut w/dust guard (OEM 48330-48A) (each) . . . . . . . . . . . . . $21.99 230-908 (C) Replica cone nut cover (OEM 48330-48). . . . . . . . . . . . . . . . . . . . . . $26.99 230-053 (D) Friction disc set (OEMs 46718-48, 4672048, 46730-48, 46727-48) (set) . . . . . . . . . $39.99 230-506 Friction washer only (OEM 46727-48) (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.99 230-060 Plate with hole (OEM 46718-48) (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.99 230-059 Plate with pin (OEM 46720-48) (each) $17.99 230-061 Plate with tab (OEM 46730-48) (each) $26.99 431-042 (E) Cone cover nut (OEM 48332-48B) (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99 2300070 (F) Dust shield set (OEM 48365-48A) upper & lower (OEM 48361-80). . . . . . . . . . . . . . . . . $6.99 230-099 (G) Frame anchor pin (OEM 46731-48) (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $13.99 1948-2008 Big Twin Wide Glide® 230-118 (B,D) 1948-2008 Big Twin Glide , black (OEM 46560-60), Import . . . . . . . . . . . . . $14.99 230-894 (B,D) 1948-2008 Big Twin Glide®, zinc (OEM 46560-60). . . . . . . . . . . . . . . . . . . . . . $14.99 230-062 (B) 1948-2008 BT Glide®, zinc (OEM 45718-60), Import . . . . . . . . . . . . . $12.99 230-928 (B) 1948-2008 Big Twin Glide®, Chrome (OEM 45718-60). . . . . . . . . . . . . . . . . . . . . . $10.99 230-567 (B,D) 1948-2008 Big Twin, Glide®, Chrome (OEM 45718-60), Import . . . . . . . . . . . . . $14.99 230-527 (B,C,D) Nut with S.S. cover (OEM 47519-59) Import . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.99 2300055 (D) Lock Tab for Glide®, 1948-2008 (OEM 45717-63) Import (each) . . . . . . . . $1.99 220-261 Chrome stem nut & lockwasher kit . . . $13.99 ® Milwaukee 230-775 Iron Polished Internal Fork Stops for 1960-2009 Models These kits are a lot cleaner than having funky tabs sticking out of the frame. But don't be fooled by cheap investment cast imitations that don't even pi2009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=23http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=23Head Race Ball Bearings For use on 1929-77 XL, XLH, 45 and 74 Springer® forks. (Replaces OEM 8860) 5/16" diameter. 230-541 Bag of 50 bearings . . . . $15.99 Steering Stem Nuts and Steering Hardware Allen Hex Lower Stem Pinch Bolts for 1949-2009 Models Available in zinc or chrome. Chrome allen set for FXWG-FXST includes headlight bracket screws, Sportster® set includes screws for side of tree. Sold in pairs. 230-514 Hex, fits 1973-86 FX, XL, zinc (OEM 4411) . . . . . . . . . . . . $6.99 230-515 Hex, fits 1949-2009 FL, FXWG, FXST, zinc (OEM 4729) . . $6.99 230-562 Hex, fits 1949-2009 FL, FXWG, FXST, Chrome . . . . . . . . . . $8.99 230-375 Allen, chrome fits 1973-86 FX, XL. . . . . . . . . . . . . . . . . . . . . . $7.99 2300350 Allen, chrome fits 1949-2009 FL, FXWG, FXST . . . . . . . . . $7.99 230-563 Allen, chrome fits 1949-2009 FL, FXWG, FXST . . . . . . . . . $8.99 Chrome Fork Stem Nut Covers for 1971-2009 Models These chrome-plated stem nut covers are great for dressing up the top clamp of 1971-2009 forks. They are held firmly in place over the stock stem nuts by a sockethead set screw. 2300343 For 35mm forks, FX, FXR 1971-87, Sportster® 1979-87. . . . . . . . . . . . . . . $13.99 2300344 For 39mm forks, FXR 1987-94, Sportster® 1988-2009 (OEM 48329-90) . . . . . . . . $9.99 2300400 For 41mm forks FXWG, FXST, FLST 1980-2009. Screws into stock mounting location (OEM 45670-80). . . . . . . $14.99 Internal Fork Stop Kit Made from highly-polished 420 stainless steel, this internal fork stop kit fits frames with press-in bearing cups and standard 1" dia. fork stems. Will also work with custom/aftermarket frames that use removable bearing cups. Will require drilling and tapping. Contains all hardware needed for installation. 231-076 Neck cup & internal fork stop kit . . . . . . . . . . . $99.99 2300030 2300055 2300085 Steering Stem Replacement Parts for 1949-2009 Models These components are the most frequently lost or damaged parts on the front end of most 1949-2009 Big Twins. For use with 1" diameter stems. Sold each. 2300085 Bearing jam nut (OEM 48330-48A). . . . . . . $9.99 2300030 Chrome stem nut (OEM 45718-60) . . . . . . . . $8.99 2300055 Stem nut locktab (OEM 45717-63) . . . . . . . . $1.99 431-042 230-049 230-760 230-461 Steering Stem Bearing Adjusting Nuts for 1949-2009 Models Adjusting nuts are available in a chrome finish with dust cover or a zinc finish without a dust cover. Both styles fit 1949-99 Big Twin and 2000-09 FXST/ 1983-2005 FXDWG. Sold each. 230-049 Chrome nut with dust cover; (OEM 48330-86A) . . . . . $19.99 431-042 Zinc nut without dust cover; (OEM 48332-48B). . . . . . . $9.99 231-505 Chrome, 2006-09 FXD (OEM 48370-06). . . . . . . $17.99 910-312 Chrome Acorn Stem Nut for 1952-2009 Models Functional and good-looking part accents most front forks. 230-760 1980-2009 (except Dyna®) FL, FXWG, FX Softail® and Dyna Wide Glide® (1"-24 thread) . . . . . . . . . . . . . . . . . . . . . . . $13.99 230-761 E1952-77 XL , 45" and many custom applications (7/8"-24 thread) . . . . . . . . $13.99 230-619 Stem Nuts for 1957-87 XL, FX, FXR Made in the USA. 230-461 Fits stock triple clamp on 1971-87 FX and FXR equipped with 35mm forks and 1979-87 Sportster® . . . . . . . . . . . . . $19.99 230-619 Fits stock triple clamp on 1957-78 Sportster®, 7/8" - 24 . . . . . . . . . . . . . . . $18.99 Motion-Pro Magnetic Parts Dish All-purpose magnetic dish is ideal for keeping track of loose fasteners and other small parts. Easy-to-see bright yellow dish attaches magnetically to any steel surface, including tool boxes and bike lifts. Measures 5" across and 1" deep. 910-312 Magnetic parts dish . . . $12.99 Chrome Plated Stem Nut The shoulder on its base fits into the top triple clamp for positive alignment. Made in the USA. 220-111 Big Twin 1936-77 . . . . . . $19.99 220-112 45" model Springer® . . . $19.99 Chrome Stem Nut Cover Chrome stem nut cover for 1987-2009 Sportster® and FXR 39mm narrow glide forks. (Replaces OEM 48329-90) 2302009-06-09T17:36:26+02:00http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=24http://ipaperus.ipaperus.com/JPCycles/2009Harley/Forks/?Page=24Fork Cups and Accessories Donnie Smith™ Signature Series 50° or 75° Frame Cups Sealed Timken® Neck Bearings for 1949-2009 Models Featuring built-in rubber seal at contact to race. Available as a complete kit with chrome cups or an update to models where races are built in frame. Order races separately. Made in the USA. 230-439 Chrome Cups with races & Sealed Bearing Kit 1949-88 BT includes 2 Dust Covers $98.99 230-411 2 Sealed Bearings and Dust Covers 1989-2009 FXST-FLST, FXR, 1982-2009 XL, 1980-2009 FLT, 1992-2005 Dyna® . $56.99 701-232 Race (pair) . . . . . . . . . . . . . $5.99 Designed by Donnie Smith™, these frame cups have a shape that blends well with the frame neck casting making it look like they were meant to be and not an afterthought. This 701-314 deluxe kit comes with internal two-position fork stops for custom applications with 55° or 75° total turn angle. CNC-machined from stainless steel and polished to a mirror finish. Engineered for use on 1936-86 stock 4-speed Big Twin and 1984-88 Softail® frames and most aftermarket frames with removable bearing cups and fully machined necks. 230-292 701-314 Deluxe fork cup kit with internal stops, (drilling and tapping of the frame neck and lower triple tree required) . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99 230-292 Drill fixture, allows precise drilling of the lower frame cup anti-rotation pin holes . . . . . . . . . . . . . . . . . . . . . $49.99 230-296 Neck Protectors Protects the paint on your frame where the fork stops contact the neck. Held with self-tapping screws and includes a drill bit, a tube of silicone and all necessary hardware. Fits all original equipment Big Twin frames with cast necks and bosses for padlocks. Polished stainless steel. Sold in pairs. Note: 230-296 will limit the effective turning radius of your motorcycle. 230-296 3/16" thick . . . . . . . . . . . . . $19.99 Chrome Dust Shield Set for 1949-2009 Big Twin 230-360 Front End Installation Kit Installation kit for stock front ends. Includes: bearings (2), upper and lower dust shield, top nut, lock tab and acorn crown nut. Both the installation kit and the parts kit fit 1960-84 FLH, 1971-85 FX, 1980-86 FXWG, 1984-2009 FXST, 1982-2003 XL, 1982-94 FXR, 1991-2005 FXD, 1980-2008 FLH, FLHR. 230-360 Installation kit . . . . . . . . $39.99 2300420 Parts kit (complete, less bearing) . . . . . . . . . . . . . $27.99 Chrome upper and lower triple tree bearing dust shield set for all 1949-2009 FL, FXWG, Softail® and FLT/FLHT. Includes both the original style lower cover (OEM 43865-48A) and the later 1977-2009 upper shield (OEM 48361-80). 2300070 Upper and lower, chrome (OEM 48365-48) . . . . . . . . $6.99 Ball Bearing Races for 1929-77 Models Races fit 74" and 80" Big Twin, Springer® and early model Sportster® type (1957-77) available. Sold each. 230-640 Upper & lower 74" & 80",1936-48 (OEM 48345-36) . . . . . . . . . . . . . . . . . . . . . . . $26.99 430-782 Lower Sportster®, 1952-77 (OEM 48347-52). . . . . . . $21.99 230-639 Upper Sportster®,1952-77 (OEM 48346-39). . . . . . . $21.99 432-511 Fits Big Twins with 45° stem (special) . . . . . . . . . . . . . . $31.99 Steering Head Bearing Race Installer for 1936-2009 Big Twin Used to install races and cups straight and true in the steering head. Works on 1936-2009 Big Twin models with stock or custom frames. Sold each. Made in the USA. 910-130 Steering head bearing race installer . . . . . . . . . . . . . . . $57.99 230-057 Ball Bearing Neck Cups Available in pairs in cadmium plated cups only or chrome plated kit with races and balls. Bearing Cup Set with Fork Stops for 1936-88 Models Fits 1936-84 FLH, 1971-86 FX, FXWG and 1984-88 FXST Big Twin stock frames and most aftermarket frames with removable neck cups. For use with custom front ends that have no fork stop in the triple trees. Use bearing and race kit 700-280 to the right. Made in the USA. 230-466 Bearing cup set . . . . . . . $69.99 230-051 1936-47 74" & 80", cadmium (OEM 48311-2009-06-09T17:36:26+02:00